Publications related to 5 GHz Band n79 wideband microacoustic filter using thin lithium niobate membrane

Related publications (34)

Advanced Silicon and SWIR Single-Photon Avalanche Diodes: Design, Simulation, and Characterization

Low-level light detection with high spatial and timing accuracy is a growing area of interest by virtue of applications such as light detection and ranging (LiDAR), biomedical imaging, time-resolved Raman spectroscopy, and quantum applications. Single-phot ...

EPFL2024

Towards Scalable Electronics: Synthetic 2D Materials for Large-Area 2D Circuit Integration

Zhenyu Wang

In the past decades, a significant increase of the transistor density on a chip has led to exponential growth in computational power driven by Moore's law. To overcome the bottleneck of traditional von-Neumann architecture in computational efficiency, effo ...

EPFL2024

Lithium tantalate photonic integrated circuits for volume manufacturing

Tobias Kippenberg, Johann Emmeram Riemensberger, Mikhail Churaev, Xinru Ji, Zihan Li, Terence Albert Emile Blésin, Chengli Wang, Junyin Zhang, Xi Wang, Chen Yang, Wil Kao, Alisa Davydova

Electro-optical photonic integrated circuits (PICs) based on lithium niobate (LiNbO3) have demonstrated the vast capabilities of materials with a high Pockels coefficient1,2. They enable linear and high-speed modulators operating at complementary metal–oxi ...

2024

An Ultralow-Power Triaxial MEMS Accelerometer With High-Voltage Biasing and Electrostatic Mismatch Compensation

Kyojin Choo

This article presents a triaxial micro electromechani-cal system (MEMS) capacitive accelerometer using a high-voltage biasing technique to achieve high resolution with ultralow power. The accelerometer system generates a differential pair of high voltages ...

Ieee-Inst Electrical Electronics Engineers Inc2024

All-Dielectric Nanophotonic via Glass Fluid Instabilities

Pierre-Luc Eloi Piveteau

In this thesis work, we propose to exploit an innovative micro/nano-fabrication process, based on controlled fluid instabilities of a thin viscous film of chalcogenide glass. Amorphous selenium and arsenic triselenide were used in this thesis work, and com ...

EPFL2024

A modular multiple frequency inductive link to wirelessly power multiple miniaturized implants

Sandro Carrara, Diego Ghezzi, Gian Luca Barbruni

A modular multiple frequency coils inductive link system to wirelessly provide power for at least a medical implant at an output of a receiving coil, whereby the receiving coil is configured to be implanted in an organism. The modular multiple frequency co ...

2024

Stability Analysis of Input-Series/Output-Parallel Solid-State Transformers Equipped with Second-Order Harmonic Active Power Filters

Drazen Dujic, Andrea Cervone, Tianyu Wei

Solid-State Transformers with Input-Series/Output-Parallel configuration offer a convenient solution for AC/DC conversion due to their scalability and modularity. In this configuration, each module experiences a second-order harmonic ripple caused by local ...

2024

S-acylation and lipid exchange at the ER-Golgi membrane contact sites regulate pathogen entry in human cells

Muhammad Umair Anwar

Cells have evolved endocytic pathways to internalize different molecules, to regulate intra-cellular communication and their interaction with external environment. Pathogens have co-evolved with cells to exploit these processes for infections. In particula ...

EPFL2024

Integrated Wireless Power, Data Communication, and Thermal Sensing System for Autonomous Multisite Brain Implants

Mohammad Javad Karimi

Implanted medical devices (IMDs) have been widely developed to support the monitoring and recording of biological data inside the body or brain. Wirelessly powered IMDs, a subset of implantable electronics, have been proposed to eliminate the limitations r ...

EPFL2024

Contemporary Logic Synthesis: with an Application to AQFP Circuit Optimization

Siang-Yun Lee

Electronic devices play an irreplaceable role in our lives. With the tightening time to market, exploding demand for computing power, and continuous desire for smaller, faster, less energy-consuming, and lower-cost chips, computer-aided design for electron ...

EPFL2024

3D Printing of Customizable Transient Bioelectronics and Sensors

Danick Briand, Nicolas Francis Fumeaux

Transient electronics have emerged as a new category of devices that can degrade after their functional lifetime, offering tremendous potential as disposable sensors, actuators, wearables, and implants. Additive manufacturing methods represent a promising ...

2024

Graph generative deep learning models with an application to circuit topologies

Igor Krawczuk

Modern integrated circuits are tiny yet incredibly complex technological artifacts, composed of millions and billions of individual structures working in unison. Managing their complexity and facilitating their design drove part of the co-evolution of mode ...

EPFL2024

The 2024 Magnonics Roadmap

Dirk Grundler, Thomas Yu, Ping Che, Qi Wang

Magnonics is a research field that has gained an increasing interest in both the fundamental and applied sciences in recent years. This field aims to explore and functionalize collective spin excitations in magnetically ordered materials for modern informa ...

2024

Special Issue: Smart Resilient Manufacturing

Dimitrios Kyritsis, Jinzhi Lu, Xiaochen Zheng

MDPI2023

Self-sustained dynamics and forced resonant oscillations in flows: cross-junction jets and sloshing liquids

Alessandro Bongarzone

In engineering, oscillatory instabilities and resonances are often considered undesirable flow features and measures are taken to avoid them. This may include avoiding certain parametric regions or implementing control and mitigation strategies. However, t ...

EPFL2023

Biomaterial devices on Arecanut palm leaf for microwave applications

Anja Skrivervik, Sujith Raman

This paper presents an investigation on the possibility of arecanut palm leaf as a biomaterial substrate for various microwave devices such as transmission lines, antenna, filter and a radio frequency identification device (RFID). The dielectric properties ...

IEEE2023

Comparison of two methods for bioaerosol sampling and characterization in a low-biomass chamber environment

Dusan Licina, Shen Yang, Marouane Merizak

Bioaerosols are emitted from various sources into the indoor environment and can positively and negatively impact human health. Humans are the major source of bioaerosol emissions indoors, specifically for bacteria. However, efficient sampling to guarantee ...

PERGAMON-ELSEVIER SCIENCE LTD2023

Sub-kHz-Linewidth External-Cavity Laser (ECL) With Si3N4 Resonator Used as a Tunable Pump for a Kerr Frequency Comb

Tobias Kippenberg, Junqiu Liu

Combining optical gain in direct-bandgap III-V materials with tunable optical feedback offered by advanced photonic integrated circuits is key to chip-scale external-cavity lasers (ECL), offering wideband tunability along with low optical linewidths. Exter ...

IEEE Institute of Electrical and Electronics Engineers2023

A multichannel versatile brain activity classification and closed loop neuromodulation system, device and method using a highly multiplexed mixed-signal front-end

Mahsa Shoaran, Bingzhao Zhu, Uisub Shin

A closed-loop neuromodulation system, including an electrode array that is implantable to a brain of a subject, analog front-end device (AFD) for selectively selecting and reading a plurality of channels from electrode array, a finite impulse response (FIR ...

2023

REMOTE: Re-thinking Task Mapping on Wireless 2.5D Systems-on-Package for Hotspot Removal

David Atienza Alonso, Giovanni Ansaloni, Marina Zapater Sancho, Darong Huang, Rafael Medina Morillas

2.5D Systems-on-Package (SoPs) are composed by several chiplets placed on an interposer. They are becoming increasingly popular as they enable easy integration of electronic components in the same package and high fabrication yields. Nevertheless, they int ...

2023