Publications related to Performance of a high vacuum, high temperature compatible millimeter-range viewing dump for the vertical ECE experiment on TCV

Related publications (34)

Facile lipid nanoparticle size engineering approach via controllable fusion induced by depletion forces

Hugo Pestre, Linda Wedemann, Jan Simon Schuhmacher, Emie-Kim Ngo Tan, Francesco Stellacci, Heyun Wang, Milena Maria Schuhmacher

Lipid nanoparticles (LNPs) are among the most promising drug delivery carriers in research and development, with one major clinical application being messenger RNA (mRNA) vaccine. Current LNP production methods have the limit of generating low polydispersi ...

2025

Machine learning enhanced tomographic reconstruction for multispectral imaging on TCV

Basil Duval, Artur Perek

A multispectral camera setup is used to infer a 2D map of plasma parameters in a tokamak from spectral emissions. However, the light measured by these cameras is line integrated in the toroidal direction, whereas emissivities on the poloidal plane are nece ...

2025

Error field detection and correction studies towards ITER operation

Olivier Sauter

In magnetic fusion devices, error field (EF) sources, spurious magnetic field perturbations, need to be identified and corrected for safe and stable (disruption-free) tokamak operation. Within Work Package Tokamak Exploitation RT04, a series of studies hav ...

IOP Publishing Ltd2024

Long plasma duration operation analyses with an international multi-machine (tokamaks and stellarators) database

Stefano Coda, Jeffrey Huang

Combined high-fusion performance and long-pulse operation is one of the key integration challenges for fusion energy development in magnetic devices. Addressing these challenges requires an integrated vision of physics and engineering aspects with the purp ...

IOP Publishing Ltd2024

Global fluid simulations of plasma turbulence in stellarators

António João Caeiro Heitor Coelho

In order to cope with the decarbonization challenge faced by many countries, fusion is one of the few alternatives to fossil fuels for the production of electricity. Two devices invented in the middle of the previous century have emerged as the most promis ...

EPFL2024

Experiments and gyrokinetic simulations of TCV plasmas with negative triangularity in view of DTT operations

Olivier Sauter, Stefano Coda, Alberto Mariani, Justin Richard Ball, Matteo Vallar, Filippo Bagnato

Negative triangularity (NT) scenarios in TCV have been compared to positive triangularity (PT) scenarios using the same plasma shapes foreseen for divertor tokamak test tokamak operations. The experiments provided a NT/PT L-mode pair and a PT H-mode with d ...

Iop Publishing Ltd2024

Multi-machine benchmark of the self-consistent 1D scrape-off layer model DIV1D from stagnation point to target with SOLPS-ITER

Holger Reimerdes

This paper extends a 1D dynamic physics-based model of the scrape-off layer (SOL) plasma, DIV1D, to include the core SOL and possibly a second target. The extended model is benchmarked on 1D mapped SOLPS-ITER simulations to find input settings for DIV1D th ...

Iop Publishing Ltd2024

DTT toroidal field conductor samples test in Sultan: DC and AC characterization

Kamil Sedlák, Mattia Ortino, Hugues Marie Alain Bajas

The superconducting magnet system of the Divertor Tokamak Test (DTT) facility, composed of 18 toroidal field (TF) coils, 6 poloidal field coils and a central solenoid, has been designed and many procurements have been launched. Some manufacturing aspects a ...

Iop Publishing Ltd2024

First-principle based predictions of the effects of negative triangularity on DTT scenarios

Olivier Sauter, Gabriele Merlo, Alberto Mariani

Plasmas with negative triangularity (NT) shape have been recently shown to be able to achieve H-mode levels of confinement in L-mode, avoiding detrimental edge localised modes. Therefore, this plasma geometry is now studied as a possible viable option for ...

IOP Publishing Ltd2024

Re-design of EU DEMO with a low aspect ratio

Xabier Sarasola Martin

The design point that had been chosen for EU DEMO in 2016 is reviewed here and a modification is proposed with a lower aspect ratio. Previously the same aspect ratio, A, was chosen for EU DEMO as in major tokamak experiments including ITER (A = 3.1), and, ...

Elsevier2024

Inter-discharge optimization for fast, reliable access to ASDEX Upgrade advanced tokamak scenario

Olivier Sauter, Federico Alberto Alfredo Felici, Simon Van Mulders, Cassandre Ekta Contré

Rapid inter-discharge simulation and optimization using the RAPTOR code have allowed the development of a reliable and reproducible early heating strategy for an advanced tokamak (AT) scenario on ASDEX Upgrade. Solving for electron heat and current diffusi ...

IOP Publishing Ltd2024

Interpretative 3D MHD modelling of deuterium SPI into a JET H-mode plasma

Umar Sheikh, Haomin Sun, Mengdi Kong, Cristian Sommariva

The pre-thermal quench (pre-TQ) dynamics of a pure deuterium ( D 2 ) shattered pellet injection (SPI) into a 3 MA / 7 MJ JET H-mode plasma is studied via 3D non-linear MHD modelling with the JOREK code. The interpretative modelling captures the overall evo ...

IOP Publishing Ltd2024

A machine-learning-based tool for last closed-flux surface reconstruction on tokamaks

Olivier Sauter, Alessandro Pau

Tokamaks allow to confine fusion plasma with magnetic fields. The prediction/reconstruction of the last closed-flux surface (LCFS) is one of the primary challenges in the control of the magnetic configuration. The evolution in time of the LCFS is determine ...

IOP Publishing Ltd2023

Equilibrium β-limits dependence on bootstrap current in classical stellarators

Hugo Paul Arbez, Jonathan Graves, Joaquim Loizu Cisquella, Antoine Baillod

While it is important to design stellarators with high magnetohydrodynamic stability β-limit, it is also crucial to ensure that good magnetic surfaces exist in a large range of β values. As β increases, pressure-driven currents perturb the vacuum magnetic ...

Cambridge University Press2023

Plasma turbulence simulations in a diverted tokamak with applied resonant magnetic perturbations

Théophile Boinnard, Paolo Ricci, Joaquim Loizu Cisquella, António João Caeiro Heitor Coelho

The first results of three-dimensional, flux-driven, electrostatic, global, two-fluid turbulence simulations of a diverted tokamak configuration with applied resonant magnetic perturbations generated by a set of saddle coils are presented. The simulations ...

IOP Publishing Ltd2023

Study of correlations between LOC/SOC transition, intrinsic toroidal rotation reversal and TEM/ITG bifurcation with different working gases in TCV

Basil Duval, Filippo Bagnato, Aylwin Iantchenko, Oleg Krutkin

The effects of different working gases on the transition from linear ohmic confinement (LOC) regime to saturated ohmic confinement (SOC) regime and its relation to the intrinsic toroidal rotation reversal phenomenon were explored in the TCV tokamak. The en ...

IOP Publishing Ltd2023

EMC and earthing concept of the ITER EC-system

Damien Fasel, Francisco Sanchez, Ugo Siravo, Jérémie Dubray

Gyrotrons and High Voltage Power Supplies (HVPS) used on electron cyclotron (EC) systems are the source of large electromagnetic interference (EMI). Arcing events inside gyrotrons is the most frequently cited issue, but fast shutdown of a HVPS can produce ...

2023

Occam's razor on the mechanism of resistive-wall-mode-induced beta limits in diverted tokamaks

Jonathan Graves, Daniele Brunetti

External kink modes, believed to be the drive of the 0-limiting resistive wall mode, are strongly stabilized by the presence of a separatrix. We thus propose a novel mechanism explaining the appearance of long-wavelength global instabilities in free bounda ...

2023

Full-discharge simulation and optimization with the RAPTOR code, from present tokamaks to ITER and DEMO

Simon Van Mulders

Tokamak devices aim to magnetically confine a hydrogen plasma at sufficiently high pressure to achieve net energy production from nuclear fusion of light isotopes. Predictive modeling and optimization is crucial for reliable operation of tokamak reactors, ...

EPFL2023

Numerical tools for burning plasmas

Laurent Villard, Jonathan Graves, Alberto Bottino, Ben McMillan, Emmanuel Lanti, Baruch Rofman

The software stack under development within a European coordinated effort on tools for burning plasma modelling is presented. The project is organised as a Task (TSVV Task 10) under the new E-TASC initiative (Litaudon et al 2022 Plasma Phys. Control. Fusio ...

IOP Publishing Ltd2023