Non-invasive drawable electrode for neuromuscular electrical stimulation and biological signal sensing

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

The pyroresistive response of conductive polymer composites (CPCs) has attracted much interest because of its potential applications in many electronic devices requiring a significant responsiveness to changes in external physical parameters such as temper ...

A method for optimizing at least one of a geometry, an implantation procedure, and/or stimulation protocol of one or more electrodes for an electrical stimulation of a target structure in a nervous system of a living being by a computer device, the method ...

A common method for creating compliant electrodes for dielectric elastomer actuators (DEAs) and soft sensors is to incorporate electrically conductive carbon particles into a polymer matrix. However, using unidirectional aligned carbon fibers instead not o ...

Electrically connected and plasmonically enhanced molecular junctions combine the optical functionalities of high field confinement and enhancement (cavity function), and of high radiative efficiency (antenna function) with the electrical functionalities o ...

In the field of electrochemical CO2 reduction, both continuum models and molecular dynamics (MD) models have been used to understand the electric double layer (EDL). MD often focuses on the region within a few nm of the electrode, while continuum models ca ...

Silver is one of the most studied electrode materials for the electrochemical reduction of carbon dioxide into carbon monoxide, a product with many industrial applications. There is a growing number of reports in which silver is implemented in gas diffusio ...

Modern power distribution systems are experiencing a large-scale integration of Converter-Interfaced Distributed Energy Resources (CIDERs). Their presence complicates the analysis and mitigation of harmonics, whose creation and propagation may be amplified ...

For the European DEMO fusion reactor, several options of the Toroidal Field (TF) coil design were proposed. The winding of the TF coil option 1 is based on React&Wind (RW), Nb3Sn, graded conductors in order to optimize the amount of superconductor accordin ...

Dielectric Elastomer Actuators (DEAs) enable the realization of energy-efficient and compact actuator systems. DEAs operate at the kilovolt range with typically microampere-level currents and hence minimize thermal losses in comparison to low voltage/high ...

The global overabundance of electronic waste and ever-increasing concerns regarding the energy-and material-intensive manufacturing processes associated with traditional electronics are driving the development of solution-processed, degradable electronics. ...

Stretchable electrodes are more suitable for dielectric elastomer transducers (DET) the closer the mechanical characteristics of the electrodes and elastomer are. Here, a solvent-free synthesis and processing of conductive composites with excellent electri ...

This manuscript reports on the application of copper thermal spraying in the manufacturing process of an electrical connection between Nb3Sn cables for superconducting magnets of fusion reactors. The joint is realized through diffusion bonding of the spray ...

The objective of this thesis is the development of high-field and high-current joints between Nb3Sn cables for superconducting coils. The main fields of application are high energy physics (HEP) and thermonuclear fusion. In this thesis, the focus is on Win ...

While metasurfaces (MSs) are constructed from deeply subwavelength unit cells, they are generally electrically large and full-wave simulations of the complete structure are computationally expensive. Thus, to reduce this high computational cost, nonuniform ...

Objective. Intraneural nerve interfaces often operate in a monopolar configuration with a common and distant ground electrode. This configuration leads to a wide spreading of the electric field. Therefore, this approach is suboptimal for intraneural nerve ...

Particle accelerators foresee the use of Nb3Sn in the next generation of dipole magnets. A common design strategy is to grade the coil, i.e., to optimize the quantity of superconductor in the turns with respect to the magnetic field intensity. As a consequ ...

Transient electronics enabling devices to safely disappear in the environment can be applied not only in green electronics, but also in bioelectronic medicine. Neural implants able to degrade harmlessly inside the body eliminate the need for removal surger ...

ESP particle collector (1) for collecting particles in a particle containing gas stream, comprising an inlet section (4), a collector section (6), and an electrode arrangement (8), the inlet section comprising a flow tube (10) defining a gas flow channel ( ...

Monitoring human sweat with wearable biochemical sensors could give insights into the hydration, fatigue, and health status, tracking the variations of biomarkers non-invasively and in real-time. In this field, organic electrochemical transistors (OECTs) a ...

Electro-adhesive clutches have become effective tools for variable stiffness functions in many robotic systems due to their light weight, high speed and strong brake force. In this paper, we present a novel, tubular design of an electro-adhesive clutch. Ou ...

Non-invasive drawable electrode for neuromuscular electrical stimulation and biological signal sensing

Chat with Graph Search

Pyroresistive response of percolating conductive polymer composites

A method and system for optimizing design, implantation, and stimulation protocols of electrodes stimulating the nervous system

Highly anisotropic carbon fiber electrodes for DEAs and their dynamic non-monotonic conductive properties

Light Emission and Conductance Fluctuations in Electrically Driven and Plasmonically Enhanced Molecular Junctions

Contrasting Views of the Electric Double Layer in Electrochemical CO2 Reduction: Continuum Models vs Molecular Dynamics

Rate-Determining Step for Electrochemical Reduction of Carbon Dioxide into Carbon Monoxide at Silver Electrodes

Unified Harmonic Power-Flow and Stability Analysis of Power Grids with Converter-Interfaced Distributed Energy Resources

AC loss and electrical resistance of the RW3 diffusion-bonded joint

Electrode Impact on the Electrical Breakdown of Dielectric Elastomer Thin Films

Additively Manufactured Degradable Piezoelectric Microsystems for Sensing and Actuating

Solvent-Free Synthesis and Processing of Conductive Elastomer Composites for Green Dielectric Elastomer Transducers

Application of Copper Thermal Spraying for Electrical Joints between Superconducting Nb3Sn Cables

Intergrade Joints for Nb3Sn cables of high magnetic field magnets

Surface Susceptibilities as Characteristic Models of Reflective Metasurfaces

Three-dimensional multilayer concentric bipolar electrodes restrict spatial activation in optic nerve stimulation

Diffusion-Bonding Between Strands and Modeling of Splices of Nb3Sn Rutherford Cables

Development of a Transient Neural Interface for Minimally Invasive Recording and Stimulation

Electrostatic particle collector

Configurable Organic Electrochemical Transistors with Printed Functional Materials for Multiplexed Sweat Analysis

Electro-Adhesive Tubular Clutch for Variable-Stiffness Robots