Publications related to Fluidic Bypass Structures for Improving the Robustness of Liquid Scanning Probes

Related publications (36)

Structure and dynamics of deeply supercooled water

Water is the solvent that enables life, essential to every biological process and shaping our environment. Yet, it is the most anomalous liquid known to humankind. Many of these anomalous properties originate from the deeply supercooled regime. Unfortunate ...

EPFL2025

Encapsulation strategies for mechanical impact and damp heat reliability improvement of lightweight photovoltaic modules towards vehicle-integrated applications

Fabiana Lisco

Lightweight modules are essential for next-generation vehicle-integrated photovoltaic (VIPV) applications, such as solar-powered cars, allowing integration of solar cells beyond the roof, and on the hood, boot and body panels, and thereby extending the dri ...

Elsevier2024

Stick-slip-to-stick transition of liquid oscillations in a U-shaped tube

François Gallaire, Alessandro Bongarzone

The nonlinear decay of oscillations of a liquid column in a U-shaped tube is investigated within the theoretical framework of the projection method formalized by Bongarzone et al. [Chaos 31, 123124 (2021)]. Starting from the full hydrodynamic system supple ...

Amer Physical Soc2024

Shear and steel-fibre reinforcement for the punching resistance of flat slabs at internal and edge columns

Diego Hernández Fraile

Reinforced concrete flat slabs consist of a continuous, thin concrete plate that rests on a grid of columns. The supporting surface of the columns is very small compared to the floor plan dimensions, leading to concentrations of shear forces near the colum ...

EPFL2024

Organic matters, but inorganic matters too: column examination of elevated mercury sorption on low organic matter aquifer material using concentrations and stable isotope ratios

Lorenz Schwab

Sorption of mercury (Hg) in soils is suggested to be predominantly associated with organic matter (OM). However, there is a growing collection of research that suggests that clay minerals and oxides are also important solid phases for the sorption of solu ...

2024

Structure and dynamics of liquid water from ab initio simulations: adding Minnesota density functionals to Jacob's ladder

Ursula Röthlisberger, Martin Peter Bircher, Justin Villard

The accurate representation of the structural and dynamical properties of water is essential for simulating the unique behavior of this ubiquitous solvent. Here we assess the current status of describing liquid water using ab initio molecular dynamics, wit ...

Royal Soc Chemistry2024

Microstructure formation in micron-scale thin-walled Hastelloy X samples fabricated with laser powder bed fusion

Christian Leinenbach

Laser powder bed fusion (LPBF) has great potential for the fabricating complex geometries with improved functionality. In combination with nickel alloys such as Hastelloy X, parts produced with this technology find usage in high-temperature applications. M ...

2023

Decentralized coordination between active distribution network and multi-microgrids through a fast decentralized adjustable robust operation framework

Yuning Jiang

Due to the autonomous characteristic and heterogeneity of the individual agents in active distribution network (ADN) with multi-microgrids (MMG), this paper proposes a fully decentralized adjustable robust operation framework achieving the coordinated oper ...

ELSEVIER2023

Reliability analysis and partial safety format calibration considering the characteristics of the resistance of reinforced concrete structures

Qianhui Yu

Every engineering calculation is an approximation of reality, with inevitable uncertainties involved. This fact implies that a reliability verification accounting for the uncertainties is a necessary step in the design and assessment of structures. Nowaday ...

EPFL2023

Raising the temperature on electrodes for anion exchange membrane electrolysis-activity and stability aspects

Jan Van Herle

The membrane electrode assembly is the powerhouse of the anion exchange membrane water electrolyser (AEMWE), thereby placing a great importance on the associated preparation conditions. This paper investigated how annealing temperature and time impacted ac ...

ELSEVIER2023

Bayesian Error-in-Variables Models for the Identification of Distribution Grids

Giancarlo Ferrari Trecate, Pulkit Nahata, Jean-Sébastien Hubert Brouillon

The increasing integration of renewable energy requires a good model of the existing power distribution infrastructure, represented by its admittance matrix. However, a reliable estimate may either be missing or quickly become obsolete, as distribution gri ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

Validating Automatic Speech Recognition and Understanding for Pre-Filling Radar Labels-Increasing Safety While Reducing Air Traffic Controllers' Workload

Juan Pablo Zuluaga Gomez

Automatic speech recognition and understanding (ASRU) for air traffic control (ATC) has been investigated in different ATC environments and applications. The objective of this study was to quantify the effect of ASRU support for air traffic controllers (AT ...

2023

CRACK SHIELDING MECHANISMS OF INTERLAYERED EPOXY MATERIALS UNDER QUASI-STATIC AND FATIGUE LOADING

Anastasios Vassilopoulos, Dharun Vadugappatty Srinivasan

This research explores the capability of PEI and PVDF thermoplastic interlayers to arrest cracks in epoxy materials modified with short-glass fibers and core-shell rubber particles. It also investigates the effect of interlayer position, the number of inte ...

Queen's University Belfast2023

Wetting Dynamics Beneath an Impacting Droplet

Ramin Kaviani

Many natural and industrial processes involve fluid flow at a three phase interface between liquid, solid and gas. When the liquid is forced to move rapidly over the solid surface, the physical mechanisms governing contact line motions are multi-phase and ...

EPFL2023

Pathways to enhance electrochemical CO2 reduction identified through direct pore-level modeling

Sophia Haussener, Etienne Boutin, Shuo Liu, Evan Fair Johnson

Electrochemical conversion of CO2 to fuels and valuable products is one pathway to reduce CO2 emissions. Electrolyzers using gas diffusion electrodes (GDEs) show much higher current densities than aqueous phase electrolyzers, yet models for multi-physical ...

2023

Switching losses in power devices: From dynamic on resistance to output capacitance hysteresis

Elison de Nazareth Matioli, Remco Franciscus Peter van Erp, Armin Jafari, Palliyage Srilak Nirmana Perera, Hongkeng Zhu

In this paper, we review some of the main methods to characterize on-state and off-state losses in wide-band-gap devices under switching conditions. In the off-state, we will discuss about losses related to charging and discharging the output capacitance i ...

IEEE2023

A Discussion on the Reliability of prEN1992-1-1:2021 Shear Strength Provisions for Fibre Reinforced Concrete Members Without Shear Reinforcement

Miguel Fernández Ruiz

The Eurocode 2 for the design of concrete structures (EN1992-1-1:2004) is undergoing a revision that will lead to the publication of the second generation of this code to be used across all CEN member countries. Therefore, the impact of the code will reach ...

SPRINGER INTERNATIONAL PUBLISHING AG2023

Machine Learning Security in Industry: A Quantitative Survey

Kathrin Grosse

Despite the large body of academic work on machine learning security, little is known about the occurrence of attacks on machine learning systems in the wild. In this paper, we report on a quantitative study with 139 industrial practitioners. We analyze at ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

The influence of the gas on the dynamics of cavitation bubbles

Davide Bernardo Preso

Cavitation bubbles, extensively investigated in fluid mechanics, present enduring challenges in hydraulic machinery, while holding considerable potential for practical applications in biomedicine and sonochemistry. Despite more than a century of research, ...

EPFL2023

Interactions of Cavitation Bubbles with Deformable Interfaces

Armand Baptiste Sieber

Cavitation is a topic that has long been of interest due to the large and growing range of applications associated with it. This is mainly because the collapse of cavitation bubbles releases a considerable amount of energy into the surrounding environment. ...

EPFL2023