Publications related to Surface Micromachining of Polyureasilazane Based Ceramic-MEMS using SU-8 Micromolds

Related publications (27)

Tailor-made Piezoelectric Elastomer Materials

Recent advancements in miniature devices with higher computational capabilities and ultralow power consumption have accelerated the development of wearable sensors, actuators, and energy harvesters everywhere. The ultimate aim of such a technological revol ...

EPFL2023

Paper of RILEM TC 282-CCL: mineralogical characterization methods for clay resources intended for use as supplementary cementitious material

Franco Alberto Zunino Sommariva, Ruben Anton Snellings, Alastair Thomas Matthew Marsh

To respond to the rapid introduction and development of calcined clays as supplementary cementitious material (SCM), the toolbox of characterization methods for cementitious materials requires extension to raw clay characterization. Borrowing concepts and ...

SPRINGER2022

Effect of chromium content on microstructural evolution of CoNiAlW superalloy

Cyril Cayron

Effects of chromium (Cr) content on types and morphologies of various phases of a newly developed Co-Ni-Al-W superalloy (Co-30Ni-6W-9Al-3Ti-1Ta) have been investigated in this study. Microstructural examinations were carried out by field-emission scanning ...

SPRINGER HEIDELBERG2022

Multiscale microshaping of functionally graded polymer-derived SiCN ceramics

Lorenz Hagelüken

Polymer-derived ceramics (PDCs) exhibit excellent properties and are compatible with many shaping techniques due to the liquid character of the preceramic polymers (PCPs). Furthermore, their properties are adjustable by modifying the precursor composition ...

EPFL2022

Systematic investigations of uranium carbide composites oxidation from micro- to nano-scale: Application to waste disposal

Nhât-Tân Vuong

The production of radioisotope beams at the ISOLDE (Isotope Separator OnLine DEvice) facility at CERN is achieved by irradiating target materials (e.g. uranium carbides and metal foils) with protons. The materials are usually operated at temperatures above ...

EPFL2021

Coupled segregation mechanisms of Sc, Zr and Mn at theta ' interfaces enhances the strength and thermal stability of Al-Cu alloys

Baptiste Thomas Jean Rouxel

The refinement and thermal stability of intermediate theta-prime (theta') precipitates are critical in the development of new high strength 2xxx series aluminium-copper (Al-Cu) alloys for high temperature applications. In this work, we use trace additions ...

PERGAMON-ELSEVIER SCIENCE LTD2021

Study and characterization of silicon metal alloys systems for the reactive infiltration process of ceramic matrix composites

Manoj Kondibhau Naikade

Silicon infiltrated silicon carbide (SiSiC) is one of the most promising and economical non-oxide ceramic matrix composites for high-temperature structural applications. In recent years infiltration by Si-alloys instead of pure Si has become popular to avo ...

EPFL2021

Effect of annealing temperature on the performance of printable carbon electrodes for perovskite solar cells

Mohammad Khaja Nazeeruddin, Iwan Zimmermann

Perovskite solar cells (PSCs) with mesoporous TiO2 electron transport layers have reached > 22% efficiency at laboratory scale ( < 1 cm(2)), however, these layers are fabricated using spin-coating, which is not conducive to large-scale or high throughput f ...

ELSEVIER SCIENCE BV2019

A novel microfabrication platform for hybrid multilayer MEMS

Nahid Hosseini

In Atomic force microscopy (AFM), the tip-sample interaction force can be measured through two primary detection techniques: optical beam detection (OBD) and electrical (self-sensing) readout. Compared to the optical method, the convenience of the self-sen ...

EPFL2019

Preparation of high-conductivity, high-capacity phase change media capsules with enhanced thermos-chemical stability in thermal energy storage applications

Selmar Rudolf Binder

Thermal energy storage using the effects of the latent heat in the solid-liquid phase transformation has found its way into every day applications. Reusable, organic phase change media stabilize low temperatures of parcels, and salt/water tanks act as buff ...

EPFL2019

Polymer derived silicon oxycarbide ceramic monoliths: Microstructure development and associated materials properties

Demetri Psaltis, Eirini Kakkava, Nicola Casati, Giulia Panusa

Polymer derived SiOC and SiCN ceramics (PDCs) are interesting candidates for additive manufacturing techniques to develop micro sized ceramics with the highest precision. PDCs are obtained by the pyrolysis of crosslinked polymer precursors at elevated temp ...

ELSEVIER SCI LTD2018

Synthesis of nanocrystalline ZnO by the thermal decomposition of [Zn(H2O)(O2C5H7)(2)] in isoamyl alcohol

Thomas Maeder

It was studied how the conditions of heat treatment of a [Zn(H2O)(O2C5H7)(2)] solution in isoamyl alcohol at 120-140A degrees C for 2-60 min affect the precursor decomposition mechanism and the characteristics of the obtained nanocrystalline zinc oxide. In ...

Maik Nauka/Interperiodica/Springer2017

Impact of water activity on the stability of ettringite

Karen Scrivener

The stability of ettringite as function of temperature and water vapour pressure was studied on synthetic samples using X-ray diffraction, thermogravimetric analysis, sorption balance measurements and different calorimetry techniques. Crystalline ettringit ...

Pergamon-Elsevier Science Ltd2016

Self-Replenishing, Wear-Resistant and Anti-Sticking Surfaces Based on Liquid Impregnation of Microstructured Mesoporous α-AI₂O₃ [Alpha Alumina] Matrices

Sriharitha Rowthu

Fabrication of wear-resistant omniphobic surfaces is a persistent scientific challenge and essential for various applications such as in paint industries, fluid transport, antifouling, reduction of friction drag on ship hulls, and stain resistant textiles. ...

EPFL2016

An experimental-numerical investigation of hydrothermal response in adhesively bonded composite structures

Véronique Michaud, Hans Georg Limberger, John Botsis, Georgios Violakis, Roohollah Sarfaraz Khabbaz, Luis Pablo Canal Casado

Water absorption and thermal response of adhesive composite joints were investigated by measurements and numerical simulations. Water diffusivity, saturation, swelling, and thermal expansion of the constituent materials and the joint were obtained from gra ...

Elsevier2015

Dynamic crack propagation in a heterogeneous ceramic microstructure, insights from a cohesive model

Seyedeh Mohadeseh Taheri Mousavi

Silicon nitride is a widely used industrial ceramic, specifically for dynamic loading applications because of its special mechanical and material properties. The investigation of the underlying mechanisms which lead to these properties is experimentally ch ...

EPFL2015

Thermal Behavior of Methylammonium Lead-Trihalide Perovskite Photovoltaic Light Harvesters

Michael Graetzel, Mohammad Khaja Nazeeruddin, Peng Gao, Peng Gao, Amalie Dualeh

Recently organicinorganic hybrid perovskites have attracted attention as light harvesting materials in mesoscopic cells. While a considerable number of deposition and formation methods have been reported for the perovskite crystalline material, most involv ...

Amer Chemical Soc2014

Preparation and characterization of multiwalled carbon nanotube/In2O3 composites

László Forró, Arnaud Magrez

We have prepared multiwalled carbon nanotube (MWCNT)/In2O3 composites using a simple impregnation method. The precursor compound indium(III) chloride (InCl3) was used to cover the surface of MWCNTs and distilled water was used as solvent. The applied mass ...

Pergamon-Elsevier Science Ltd2013

The effect of titania precursor on the morphology of prepared TiO2/MWCNT nanocomposite materials

László Forró, Arnaud Magrez, Endre Horvath, Dóra Fejes-Kajtár

Since materials science is of great importance, the application of composite materials based on carbon nanotubes (CNTs) is widely investigated. Current work is aimed at preparing nanocomposites of TiO2/MWCNT using an impregnation method combined with slow ...

Wiley-V C H Verlag Gmbh2014

Synthesis, growth and characterization of 4-bromo-4′-nitrobenzylidene aniline (BNBA): a novel nonlinear optical material with a (3+1)-dimensional incommensurately modulated structure

Gervais Chapuis, Philip Pattison, Alla Arakcheeva

The organic nonlinear optical material of 4-bromo-4'-nitrobenzylidene aniline (BNBA, C13H9BrN2O2), a new derivative of benzylideneaniline family, was synthesized and purified by repeated recrystallization. Single crystals of BNBA were grown in acetone solv ...

Royal Society of Chemistry2013