Publications related to Scaling unreinforced masonry for reduced-scale seismic testing

Related publications (29)

Cyclic Behavior of Physical Models of Reinforced Concrete Columns Built with Additive Manufacturing

This paper presents quasistatic cyclic tests on 1 & ratio;30 scale physical models of reinforced concrete columns with additively manufactured (3D-printed) reinforcement cages. Such physical models are useful for centrifuge modeling of RC structures focusi ...

ASCE-AMER SOC CIVIL ENGINEERS2025

Coupled micro-computed tomography and micromechanical experiment on the failure of discontinuous porphyry rock

Edward Carlo Giorgio Andò

Rock is a discontinuous, heterogeneous material with complex mechanical behaviour. The variable material properties create uncertainty in response to load, associated rock mass damage and communition. Traditional approaches in rock mechanics rely on labora ...

2025

Seismic Testing of Adjacent Interacting Masonry Structures – Analysis of a Blind Prediction

Katrin Beyer, Igor Tomic

Masonry aggregates, which emerged as layouts of cities and villages became denser, make up historical centres all over the world. In these aggregates, neighbouring structures may share structural walls that are joined at the interfaces by mortar or interlo ...

Springer2024

Experimental Investigation on Size-Effect of Rubble Stone Masonry Walls Under In-Plane Horizontal Loading: Overview and Preliminary Results

Katrin Beyer, Savvas Saloustros

Rubble stone masonry is a common construction typology of historical city centres and vernacular architecture. While past earthquakes have shown that it is one of the most vulnerable masonry construction typologies, there are few experimental campaigns giv ...

2024

Reducing uncertainties in response predictions of earthquake-damaged masonry buildings using data from image-based inspection

Ian Smith, Katrin Beyer, Bryan German Pantoja Rosero, Mathias Christian Haindl Carvallo

Image information about the state of a building after an earthquake, which can be collected without endangering the post-earthquake reconnaissance activities, can be used to reduce uncertainties in response predictions for future seismic events. This paper ...

Springer2024

Numerical Modeling of FRP-Strengthened Masonry Structures Using Equivalent Frame Models

Katrin Beyer, Francesco Vanin, Ivana Bozulic

The present study focuses on enhancing the seismic resistance of existing masonry structures. To that aim, the use of fiber-reinforced polymer (FRP) strengthening serves to improve structural behaviour by attaching FRP strips to the masonry walls. Despite ...

Springer2024

Contributions to rebar-to-concrete interaction and its structural implications for design and monitoring applications

Enrique Corres Sojo

Bond between reinforcing bars and concrete has been the focus of extensive research over the last century. This is well-justified as the functioning of reinforced concrete intimately depends on the interaction between rebar and concrete, as for example cra ...

EPFL2024

Reusability assessment of reinforced concrete components prior to deconstruction from obsolete buildings

Corentin Jean Dominique Fivet, Maléna Bastien Masse, Julie Rachel Devènes

A large part of building demolitions is motivated by purely socio-economic reasons. Hence, about-to-be-demolished structures, commonly made of reinforced concrete, very often present no or little degradation. When adaptive reuse of the entire building is n ...

2024

Shear and steel-fibre reinforcement for the punching resistance of flat slabs at internal and edge columns

Diego Hernández Fraile

Reinforced concrete flat slabs consist of a continuous, thin concrete plate that rests on a grid of columns. The supporting surface of the columns is very small compared to the floor plan dimensions, leading to concentrations of shear forces near the colum ...

EPFL2024

Customized modular multi-material mouthguard and method of making the same

Dominique Pioletti, Naser Nasrollahzadeh Mamaghani, Martin Broome

There is described a mouthguard comprising an externally exposed impact protective region defined by a first material property and configured to cover a front tooth, an internally exposed occlusional cushioning region defined by a second material property ...

2024

Computational Homogenization for Inverse Design of Surface-based Inflatables

Mark Pauly, Florin Isvoranu, Francis Julian Panetta, Yingying Ren, Seiichi Eduardo Suzuki Erazo, Uday Kusupati

Surface-based inflatables are composed of two thin layers of nearly inextensible sheet material joined together along carefully selected fusing curves. During inflation, pressure forces separate the two sheets to maximize the enclosed volume. The fusing c ...

Association for Computing Machinery (ACM)2024

Seismic Testing of Adjacent Interacting Masonry Structures

Katrin Beyer, Igor Tomic

Masonry buildings form building aggregates around the world in historical centers, which developed as the layout of the city or village densified. In these aggregates, adjacent buildings can share structural walls, connected at the interfaces by interlocki ...

2023

Lessons learned from a prediction and postdiction of a shake table test on an unreinforced masonry aggregate

Katrin Beyer, Igor Tomic

Historical centers of Europe and Croatia are often formed by unreinforced masonry building aggregates that developed as the layout of the city or village was densified. In these aggregates, adjacent buildings can share structural walls with an older and a ...

2023

Community-Aware Group Testing

Christina Fragouli, Suhas Diggavi, Pavlos Nikolopoulos

Group testing is a technique that can reduce the number of tests needed to identify infected members in a population, by pooling together multiple diagnostic samples. Despite the variety and importance of prior results, traditional work on group testing ha ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

Equivalent Frame Models for FRP-Strengthened Masonry Buildings

Fibre-reinforced polymers (FRP) strengthening can be applied to decrease the seismic vulnerability of existing masonry buildings, both with regard to in-plane and out-of-plane failure mechanisms. Experimentally, the impact of strengthening solutions has be ...

Proceedings of the 2nd Croatian Conference on Earthquake Eng2023

Energy dissipation in fiber-polymer composites adhesive joints under cyclic loading

Ghazaleh Eslami

Sustainable development has emerged as a paramount consideration in various fields of industry, including construction, to preserve the environment and its finite resources. Lightweight structures, such as fiber-polymer composite structures, address both s ...

EPFL2023

On the slip burst amplitude cutoff in dislocation-rich microcrystals

Andreas Mortensen, Luciano Borasi

The plastic deformation of small-scale face-centered cubic metals exhibits intermittent slip burst events that appear on stress-strain curves as sudden strain jumps and/or load drops. These events are generally attributed to the avalanche-like cooperative ...

Pergamon-Elsevier Science Ltd2023

Correlation between sonic pulse velocity and flat-jack tests for the estimation of the elastic properties of unreinforced brick masonry: Case studies from Croatia

Savvas Saloustros

Historic urban cores in southern Europe are characterized by a significant number of existing unreinforced masonry structures that are known for their seismic vulnerability. The first step in the preservation of such damaged buildings is condition assessme ...

2023

A VR-based workflow to assess perception of daylit views-out with a focus on dynamism and immersion

Marilyne Andersen, Caroline Karmann, Yunjoung Cho

Amongst the elements often overlooked in existing studies, dynamic movement and temporal changes in the content of views-out have been suggested to have a high potential to improve its perceived quality and occupant satisfaction. Moreover, in past and ongo ...

IOP Publishing2023

Community-based reconstruction and simulation of a full-scale model of region CA1 of rat hippocampus

Alberto Antonietti, Davide Bella, Pranav Rai, Henry Markram, Felix Schürmann, Eilif Benjamin Muller, Michael Reimann, Marwan Muhammad Ahmed Abdellah, Werner Alfons Hilda Van Geit, Lida Kanari, Srikanth Ramaswamy, James Gonzalo King, Alexis Arnaudon, Ying Shi, András Ecker, Jean-Denis Georges Emile Courcol, Armando Romani, Pramod Shivaji Kumbhar, Judit Planas Carbonell, Michael Emiel Gevaert, Nadir Roman Guerrero, Liesbeth Maria L Vanherpe, Huanxiang Lu, Mohameth François Sy, Cristina Colangelo, Juan Bautista Hernando Vieites, Cyrille Pierre Henri Favreau, Genrich Ivaska, Anna-Kristin Kaufmann, Joni Henrikki Herttuainen, Elvis Boci, Vishal Sood, Thomas Brice Delemontex, Fabien Petitjean, Julian Martin Budd, Mustafa Kerem Kurban

The CA1 region of the hippocampus is one of the most studied regions of the rodent brain, thought to play an important role in cognitive functions such as memory and spatial navigation. Despite a wealth of experimental data on its structure and function, i ...

2024