Publications related to Triboelectrochemical techniques and interpretation methods in tribocorrosion: A comparative evaluation

Related publications (33)

A story of two transitions: From adhesive to abrasive wear and from ductile to brittle regime

Jean-François Molinari, Sacha Zenon Wattel

Atomistic simulations performed with a family of model potential with tunable hardness have proven to be a great tool for advancing the understanding of wear processes at the asperity level. They have been instrumental in finding a critical length scale, w ...

2024

Plasmonic Nanostructures for Photocatalysis: Material, Photonic and Electronic Effects

Fateme Kiani Shahvandi

Plasmonic photochemistry has a large potential to replace energy-intensive chemical processes with low-temperature, low-pressure light-driven chemical reactions. Plasmonic nanostructures have emerged as promising photocatalysts with exceptional and tunable ...

EPFL2024

Artificial Hydrophilic Organic and Dendrite-Suppressed Inorganic Hybrid Solid Electrolyte Interface Layer for Highly Stable Zinc Anodes

Lei Zhang, Kangning Zhao

Aqueous zinc-ion batteries (AZIBs) have gained significant attentions for their inherent safety and cost-effectiveness. However, challenges, such as dendrite growth and anodic corrosion at the Zn anode, hinder their commercial viability. In this paper, an ...

Amer Chemical Soc2024

Corrosion behavior and tribological-microstructural characterization of Al/ZrO2-Gr hybrid composite fabricated via Friction Stir Processing

Seyyedezzatollah Moosavi

The present study investigates the microstructural evolution, tribological properties, and corrosion behavior of hybrid metal matrix composites reinforced by a combination of graphite (Gr) and zirconia (ZrO2) particles fabricated by Friction Stir Processin ...

2023

Effect of Mo addition on the mechanical and tribological properties of magnetron sputtered TiN films

Sami Rtimi

Ternary-based titanium nitride (TiN) thin films have drawn attention toward rational applications due to their wear resistance, high hardness, and corrosion resistance. The influence of Mo content on the structural, tribo-logical, and mechanical properties ...

ELSEVIER SCIENCE SA2023

Splitting probabilities and mean first-passage times across multiple thresholds of jump-and-drift transition paths

Paolo Perona, Giulio Calvani

We apply the stochastic-trajectory analysis to derive exact expressions for the mean first passage times of jump-and-drift transition paths across two or more consecutive thresholds. We perform the analysis of the crossing statistics in terms of dimensionl ...

2023

Electrolyte engineering via ether solvent fluorination for developing stable non-aqueous lithium metal batteries

Mounir Driss Mensi

Fluorination of solvents, useful for non-aqueous lithium-based batteries, improves the electrochemical stability but decreases the ionic conductivity. Here, the authors report a targeted functionalization of an ether solvent to balance the electrolyte ioni ...

Nature Portfolio2023

Reactivity of Bromine Radical with Dissolved Organic Matter Moieties and Monochloramine: Effect on Bromate Formation during Ozonation

Urs von Gunten, Sung Eun Lim

Bromine radical (Br center dot) has been hypothesized to be a key intermediate of bromate formation during ozonation. Once formed, Br center dot further reacts with ozone to eventually form bromate. However, this reaction competes with the reaction of Br c ...

AMER CHEMICAL SOC2023

Mechanistic study on the evolution of vacancies in graphene by oxidation by scanning tunneling microscopy

Shaoxian Li

Nanostructured graphitic materials, including graphene hosting Å to nanometer-sized pores, have attracted attention for various applications such as separations, sensors, and energy storage. Graphene with Å-scale pores is a promising next-generation materi ...

EPFL2023

Gas/Surface reactions probed by reflection absorption infrared spectroscopy

Harmina Vejayan

In my thesis, I present an investigation of the dissociation reactions of gas phase molecules on single crystal metal surfaces studied by a molecular beam in combination with Reflection Absorption Infrared Spectroscopy (RAIRS). Two gas/surface systems were ...

EPFL2023

Precipitation in lean Mg-Zn-Ca alloys

Cécile Hébert, Davide Deiana

While lean Mg-Zn-Ca alloys are promising materials for temporary implants, questions remain on the impact of Zn and Ca on the microstructure. In this context, the precipitation of Zn and Ca in Mg-1.5Zn-0.25Ca (in wt.%), initially extruded at 330 & DEG;C, t ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Dynamics of entrapped microbubbles with multiple openings

Mahmut Selman Sakar, Murat Kaynak, Amit Yedidia Dolev

Microbubbles excited by acoustic fields inside water oscillate, and generate acoustic radiation forces and drag-induced acoustic streaming. These forces can be harnessed in various biomedical applications such as targeted drug delivery and on-chip biomanip ...

2022

Corrosion testing of solar cells: Wear-out degradation behavior

Christophe Ballif, Alessandro Francesco Aldo Virtuani, Andrew Wayne Fairbrother, Luca Gnocchi

Corrosion is one of the main end-of-life degradation and failure modes in photovoltaic (PV) modules. However, it is a gradual process and can take many years to become a major risk factor because of the slow accumulation of water and acetic acid (from enca ...

ELSEVIER2022

Ionization Difference between Weak and Strong Electrolytes as Perturbed by Conductivity Spectra Analysis

Vasily Artemov

While the static structure of aqueous electrolytes has been studied for decades, their dynamic microscopic structure remains unresolved yet critical in many areas. We report a comparative study of dc and ac (1 Hz to 20 GHz) conductivity data of weak and st ...

AMER CHEMICAL SOC2022

Imaging of Chemical Kinetics at the Water–Water Interface in a Free-Flowing Liquid Flat-Jet

Andreas Osterwalder, Bruno Credidio

We present chemical kinetics measurements of the luminol oxidation chemiluminescence (CL) reaction at the interface between two aqueous solutions, using liquid jet technology. Free-flowing liquid microjets are a relatively recent development that have foun ...

2022

Modeling the origins of adhesive wear across scales

Son-Jonathan Pham-Ba

Friction and wear occur at every interface between solid materials. In the design of mechanical devices, it is desirable to be able to quantify and control the amount of friction and wear, as well as predict their evolution with time. ``Tribology'' is the ...

EPFL2022

Modulating the Reactivity of Liquid Ga Nanoparticle Inks by Modifying Their Surface Chemistry

Raffaella Buonsanti, Laia Castilla Amorós, James Richard Pankhurst

Micro- and nanosized particles of liquid metals, particularly Ga-based alloys, are attracting increasing attention for applications in several fields. The surface functionalization of Ga-based nanoparticles (NPs) with organic ligands renders easily process ...

2022

Effect of wear particles and roughness on nanoscale friction

Jean-François Molinari, Tobias Brink, Enrico Milanese

Frictional contacts lead to the formation of a surface layer called the third body, consisting of wear particles and structures resulting from their agglomerates. Its behavior and properties at the nanoscale control the macroscopic tribological performance ...

2022

Microfluidic study in a meter-long reactive path reveals how the medium’s structural heterogeneity shapes MICP-induced biocementation

Lyesse Laloui, Dimitrios Terzis, Ariadni Elmaloglou

Microbially induced calcium carbonate (CaCO3) precipitation (MICP) is one of the major sustainable alternatives to the artificial cementation of granular media. MICP consists of injecting the soil with bacterial- and calcium-rich solutions sequentially to ...

Nature Research2022

Fatigue Performance of an Additively Manufactured Zr-Based Bulk Metallic Glass and the Effect of Post-Processing

Roland Logé, Jamasp Jhabvala, Navid Sohrabi, Milad Hamidi Nasab, Annapaola Parrilli, Baptiste Thomas Jean Rouxel

Fatigue is the most common cause of failure of mechanical parts in engineering applications. In the current work, we investigate the fatigue life of a bulk metallic (BMG) glass fabricated via additive manufacturing. Specimens fabricated via laser powder-be ...

MDPI2021