Publications related to Advanced analysis of fully-printed organic transistors platform for multi-ion detection in sweat

Related publications (18)

2025 roadmap on 3D nanomagnetism

The transition from planar to three-dimensional (3D) magnetic nanostructures represents a significant advancement in both fundamental research and practical applications, offering vast potential for next-generation technologies like ultrahigh-density stora ...

IOP Publishing Ltd2025

Mechanoreceptive soft robotic molluscoids made of granular hydrogel-based organoelectronics

Esther Amstad, Nana Obayashi, Lorenzo Lucherini, Francesca Bono, Josephine Anna Eleanor Hughes

The viscoelasticity of many soft polymers renders flexible sensors susceptible to hysteresis and signal drift that limit their accuracy. To reduce the impact of viscoelasticity on the signal without compromising the softness of the material, we introduce e ...

2025

Controlling On-Surface Photoactivity: The Impact of π-Conjugation in Anhydride-Functionalized Molecules on a Semiconductor Surface

Christian Wäckerlin

On-surface synthesis has become a prominent method for growing low-dimensional carbon-based nanomaterials on metal surfaces. However, the necessity of decoupling organic nanostructures from metal substrates to exploit their properties requires either trans ...

Wiley-VCH Verlag GmbH2024

Deterministic grayscale nanotopography to engineer mobilities in strained MoS2 FETs

Giovanni Boero, Andras Kis, Jürgen Brugger, Georg Fantner, Nicola Marzari, Norma Rivano, Zhenyu Wang, Xia Liu, Ana Conde Rubio, Berke Erbas, Mitali Banerjee, Jin Jiang, Marcos Penedo Garcia

Field-effect transistors (FETs) based on two-dimensional materials (2DMs) with atomically thin channels have emerged as a promising platform for beyond-silicon electronics. However, low carrier mobility in 2DM transistors driven by phonon scattering remain ...

Nature Research2024

Ternary Oxides of s - and p -Block Metals for Photocatalytic Solar-to-Hydrogen Conversion

Iurii Timrov

Oxides containing metals or metalloids from the p block of the periodic table (e.g., In, Sn, Sb, Pb, and Bi) are of technological interest as transparent conductors and light absorbers for solar-energy conversion due to the tunability of their electronic c ...

2024

Additive Fabrication of Functional Microfluidic Devices

Mustafa Mohieldin Fadlelmula Fadlelseed

In the age of smart systems, artificial intelligence, and personalized devices, the need for effective methods to facilitate multifunctionality integration has become a necessity. One of the fields that boosts the efforts of multifunctionality integration ...

EPFL2024

SPAD Developed in 55 nm Bipolar-CMOS-DMOS Technology Achieving Near 90% Peak PDP

Claudio Bruschini, Edoardo Charbon, Francesco Gramuglia, Myung Jae Lee, Ekin Kizilkan, Pouyan Keshavarzian, Won Yong Ha

We present a single-photon avalanche diode (SPAD) developed in 55 nm bipolar-CMOS-DMOS (BCD) technology, which achieves high photon detection probability (PDP) while its breakdown voltage is lower than 20 V. To enhance the PDP performance, the SPAD junctio ...

Ieee-Inst Electrical Electronics Engineers Inc2024

Mobility Gaps of Hydrogenated Amorphous Silicon Related to Hydrogen Concentration and Its Influence on Electrical Performance

Sylvain Dunand, Nicolas Würsch, Jonathan Emanuel Thomet

This paper presents a comprehensive study of hydrogenated amorphous silicon (a-Si)-based detectors, utilizing electrical characterization, Raman spectroscopy, photoemission, and inverse photoemission techniques. The unique properties of a-Si have sparked i ...

2024

Study of Ionized Particles in a Gyrotron Using a Full Gyrotron Simulation Model

Jean-Philippe Hogge, Jérémy Genoud

The ionization of the residual gas in gyrotrons causes the generation of positively charged ions and negatively charged electrons. Using the electron optics code Ariadne, it was possible to simulate the behavior of these electrons in the overall gyrotron g ...

Institute of Electrical and Electronics Engineers Inc.2024

Towards Quantitative Terahertz Characterisation of Zinc Phosphide Thin Films for Photovoltaic Applications

Anna Fontcuberta i Morral, Elias Zsolt Stutz, Jean-Baptiste Leran, Léa Buswell, Simon Robert Escobar Steinvall, Rajrupa Paul, Mirjana Dimitrievska

The earth-abundant and non-toxic material Zinc phosphide (Zn3P2) is a promising candidate for solar cell applications. However, growth of defect-free, high-quality thin films on substrates that can integrate with current technology (e.g. silicon) remains c ...

IEEE Computer Society2024

Amperometric Measurements by a Novel Aerosol Jet Printed Flexible Sensor for Wearable Applications

Sandro Carrara, Sarah Tonello

the last years, increasing interest has been addressed on wearable devices for the continuous monitoring of biochemical profiles of patients and athletes. Among various markers, lactate represents one of the most interesting to deepen the knowledge on fati ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

Trapping Layers Prevent Dopant Segregation and Enable Remote Doping of Templated Self-Assembled InGaAs Nanowires

Anna Fontcuberta i Morral, Nicholas Paul Morgan, Didem Dede, Valerio Piazza

Selective area epitaxy is a promising approach to definenanowirenetworks for topological quantum computing. However, it is challengingto concurrently engineer nanowire morphology, for carrier confinement,and precision doping, to tune carrier density. We re ...

AMER CHEMICAL SOC2023

Printed Electronics Technologies for Additive Manufacturing of Hybrid Electronic Sensor Systems

Sandro Carrara, Johanna Zikulnig

Requirements for the miniaturization of electronics are constantly increasing as more and more functions are aimed to be integrated into a single device. At the same time, there are strong demands for low-cost manufacturing, environmental compatibility, ra ...

WILEY2023

New ultrahigh-speed device concepts: from THz nanoplasma devices to glass-like electronics for neuromorphic computation

Mohammad Samizadeh Nikooytabalvandani

There is a never-ending push for electronic systems to provide faster operation speeds, higher energy efficiencies, and higher power capabilities at smaller scales. These requirements are apparent in different areas of electronics, from radiofrequency (RF) ...

EPFL2023

Indoor Self-Powered Perovskite Optoelectronics with Ultraflexible Monochromatic Light Source

Felix Thomas Eickemeyer, Hiroaki Jinno, Lukas Pfeifer

Self-powered skin optoelectronics fabricated on ultrathin polymer films is emerging as one of the most promising components for the next-generation Internet of Things (IoT) technology. However, a longstanding challenge is the device underperformance owing ...

Wiley-V C H Verlag Gmbh2023

Neuromorphic computing based on halide perovskites

Mohammad Khaja Nazeeruddin

Neuromorphic computing requires electronic systems that can perform massively parallel computational tasks with low energy consumption. Such systems have traditionally been based on complementary metal-oxide-semiconductor circuits, but further advances in ...

Nature Portfolio2023

Energy Efficient Sensing using Steep Slope Devices

Teodor Rosca

Today, we are witnessing the Internet of Things (IoT) revolution, which facilitates and improves our lives in many aspects, but comes with several challenges related to the technology deployment at large scales. Handling ever growing amounts of information ...

EPFL2022

New Technologies to Enhance the Figures-of-Merit of GaN Power Devices

Luca Nela

Gallium Nitride (GaN) has enabled groundbreaking developments in the field of optoelectronics and radio frequency communication. More recently, GaN devices for power conversion applications have demonstrated excellent potential. Thanks to Gallium Nitride w ...

EPFL2022