Publications related to Pressure-dependent elastic and transport properties of porous and permeable rocks: Microstructural control

Related publications (29)

Hydro-Mechanical and Gas Transport Properties of Shales in the Context of Deep Geological Repositories

Shales are extensively studied for their roles in various geosystems, including radioactive waste disposal, CO2 sequestration, underground hydrogen storage, and oil and gas extraction. In radioactive waste repositories, gas generation, arising from corrosi ...

EPFL2025

Percolation for 2D Classical Heisenberg Model and Exit Sets of Vector Valued GFF

Juhan Aru

Our motivation in this paper is twofold. First, we study the geometry of a class of exploration sets, called exit sets, which are naturally associated with a 2D vector-valued Gaussian Free Field:

\phi : \mathbb{Z}^2 \rightarrow \mathbb{R}^N

,

N \ge 1

. W ...

SPRINGER2025

Pyroresistive response of percolating conductive polymer composites

Claudio Grimaldi

The pyroresistive response of conductive polymer composites (CPCs) has attracted much interest because of its potential applications in many electronic devices requiring a significant responsiveness to changes in external physical parameters such as temper ...

Amer Physical Soc2024

Light Emission and Conductance Fluctuations in Electrically Driven and Plasmonically Enhanced Molecular Junctions

Zhiyuan Xie, Christophe Marcel Georges Galland, Wen Chen, Sakthi Priya Amirtharaj, Konstantin Malchow

Electrically connected and plasmonically enhanced molecular junctions combine the optical functionalities of high field confinement and enhancement (cavity function), and of high radiative efficiency (antenna function) with the electrical functionalities o ...

Amer Chemical Soc2024

Highly anisotropic carbon fiber electrodes for DEAs and their dynamic non-monotonic conductive properties

Yves Perriard, Stefania Maria Aliki Konstantinidi

A common method for creating compliant electrodes for dielectric elastomer actuators (DEAs) and soft sensors is to incorporate electrically conductive carbon particles into a polymer matrix. However, using unidirectional aligned carbon fibers instead not o ...

Society of Photo-Optical Instrumentation Engineers (SPIE)2024

Mixing oak and pine trees in Mediterranean forests increases aboveground hydraulic dysfunctions

Charlotte Grossiord, Eugénie Isabelle Mas

Increasing tree species diversity in Mediterranean forests could reduce drought-induced hydraulic impairments through improved microclimate and reduced competition for water. However, it remains unclear if and how species diversity modulates tree hydraulic ...

2024

Impact of CO2-rich seawater injection on the flow properties of basalts

Cesare Griner, Lyesse Laloui, Eleni Stavropoulou

Permanent CO storage in basalts through mineralisation offers a promising solution for reducing carbon emissions and mitigating climate change. This study focuses on the impact of potential mineralisation on the flow properties of the basaltic material. Fl ...

2024

Water weakening and the compressive brittle strength of carbonates: Influence of fracture toughness and static friction

Marie Estelle Solange Violay, Corentin Jean-Marie Rémi Noël, Barnaby Padraig Fryer

Water is ubiquitous within the pore space of rocks and has been shown to affect their physical and mechanical behaviour. Indeed, water can act on the rock strength via mechanical (i.e., reducing the effective stresses) or chemical effects (e.g., mineral di ...

2024

Twenty years of irrigation acclimation is driven by denser canopies and not by plasticity in twig- and needle-level hydraulics in a Pinus sylvestris forest

Charlotte Grossiord, Christoph Bachofen, Eugénie Isabelle Mas, Alice Jacqueline Frédérique Gauthey, Alex Tunas Corzon

Climate change is predicted to increase atmospheric vapor pressure deficit, exacerbating soil drought, and thus enhancing tree evaporative demand and mortality. Yet, few studies have addressed the longer-term drought acclimation strategy of trees, particul ...

Oxford Univ Press2024

Thermal sensing device and sensory feedback system and method using such thermal sensing device

Silvestro Micera, Solaiman Shokur, Outman Akouissi, Jonathan Louis Muheim

The present invention concerns a thermal sensing device (1) and a sensory feedback system and method using such thermal sensing device, comprising at least one film (19) of electrically insulating polymer defining a global surface of the thermal sensing de ...

2024

Measuring electrical properties in semiconductor devices by pixelated STEM and off-axis electron holography (or convergent beams vs. plane waves)

Victor Carle Adrien Boureau

We demonstrate the use of both pixelated differential phase contrast (DPC) scanning transmission electron microscopy (STEM) and off-axis electron holography (EH) for the measurement of electric fields and assess the advantages and limitations of each techn ...

Pergamon-Elsevier Science Ltd2024

Elongated hydraulic fracture emerging from layers of alternating fracture toughness

Brice Tanguy Alphonse Lecampion, Carlo Peruzzo

Whether used to enhance the hydrocarbon production from low permeability rocks or to measure the minimum in-situ principal stress in rock formations, height growth of a hydraulic fracture above the formation of interest is a key metric for the design of su ...

2023

Propagation of planar three-dimensional buoyant hydraulic fractures

Andreas Möri

Hydraulic fractures are driven by an internal fluid pressure exceeding the minimum compressive stress, propagating in a direction perpendicular to the latter. This class of tensile fractures has gained interest over the last fifty years due to the developm ...

EPFL2023

THE PHASE TRANSITION FOR PLANAR GAUSSIAN PERCOLATION MODELS WITHOUT FKG

Alejandro Rivera

We develop techniques to study the phase transition for planar Gaussian percolation models that are not (necessarily) positively correlated. These models lack the property of positive associations (also known as the 'FKG inequality'), and hence many classi ...

Inst Mathematical Statistics-Ims2023

Influence of pore-scale heterogeneity on the precipitation patterns in Microbially Induced Calcite Precipitation (MICP)

Ariadni Elmaloglou

The principle of tailoring material properties to improve the mechanical behaviour of soils through compaction or cement grouting dates to the 60s. The increasing trends of urbanization worldwide require new solutions for the development of resilient and s ...

EPFL2023

Monitoring of water table level and volume of water in a porous storage by seismic data

Jan Sickmann Hesthaven

Neural networks provide an attractive framework to monitor the water table level and the volume of stored water in porous media from seismic data in an automated, fast and cost-efficient manner. In this work, a subsurface reservoir is modeled as a coupled ...

European Association of Geoscientists and Engineers, EAGE2023

Percolation and phase behavior in cellulose nanocrystal suspensions from nonlinear rheological analysis

Tiffany Abitbol

We examine the influence of surface charge on the percolation, gel-point and phase behavior of cellulose nanocrystal (CNC) suspensions in relation to their nonlinear rheological material response. Desulfation decreases CNC surface charge density which lead ...

ELSEVIER SCI LTD2023

Modeling of solids particle diversion to promote uniform growth of multiple hydraulic fractures

Guanyi Lu

Solid particulate additives are sometimes used to promote the uniform growth of multiple hydraulic fractures in horizontal oil and gas wells. The principle is that solid particulates block, accumulate, and form larger porous plugging zones preferentially a ...

ELSEVIER2023

Understanding and mitigating resistive losses in fired passivating contacts: role of the interfaces and optimization of the thermal budget

Christophe Ballif, Franz-Josef Haug, Aïcha Hessler-Wyser, Luca Massimiliano Antognini, Sofia Libraro, Audrey Marie Isabelle Morisset, Julien Hurni, Ezgi Genç

This work presents a study of p-type passivating contacts based on SiCx formed via a rapid thermal processing (RTP) step, using conditions compatible with the firing used to sinter screen-printed metallization pastes in industry. The contributions of the t ...

Elsevier2023

Visualization and modelling of dynamic flow in fibrous preforms for liquid composite molding

Helena Luisa Teixido Pedarros

Nowadays, Liquid Composite Molding techniques are often used to manufacture high quality fiber reinforced composite parts at a relatively low cost. These involve an infiltration process, in which a liquid resin is forced to ingress into a dry fibrous porou ...

EPFL2023