Publications related to Synchronous machines parameters determination using finite elements method

Related publications (35)

Pseudo-Three-Dimensional Analytical Model of Linear Induction Motors for High-Speed Applications

Mario Paolone, André Hodder, Simone Rametti, Lucien André Félicien Pierrejean

Literature on linear induction motors (LIMs) has proposed several approaches to model the behavior of such devices for different applications. In terms of accuracy and fidelity, field analysis-based models are the most relevant. Closed-form or numerical so ...

2024

Stability Analysis of Input-Series/Output-Parallel Solid-State Transformers Equipped with Second-Order Harmonic Active Power Filters

Drazen Dujic, Andrea Cervone, Tianyu Wei

Solid-State Transformers with Input-Series/Output-Parallel configuration offer a convenient solution for AC/DC conversion due to their scalability and modularity. In this configuration, each module experiences a second-order harmonic ripple caused by local ...

2024

Computational design and additive manufacturing of electromagnetic coils

Adrien Jean-Michel Thabuis

The modern world is heavily reliant on electromagnetic devices to convert mechanical energy into electrical energy and vice versa. These devices are fundamental to powering our society, and the growing need for automated production lines and electrified tr ...

EPFL2023

Dynamics analysis for DC transformers integration in hybrid AC‐DC power distribution networks

Drazen Dujic, Andrea Cervone, Renan Pillon Barcelos, Jules Christian Georges Macé, Max Dupont

In AC/DC power distributions networks, power converters are interfacing buses to ensure DC voltage regulation and power distribution. Active front ends are used between AC and DC buses and two typical control schemes that can be implemented are voltage reg ...

2023

Finite element method–discrete element method bridging coupling for the modeling of gouge

Jean-François Molinari, Guillaume Anciaux, Antonio Joaquin Garcia Suarez, Manon Eugénie Voisin--Leprince

We discuss the multiscale modeling of a granular material trapped between continuum elastic domains. The amorphous granular region, usually termed “gouge,” is under high confinement pressure, to represent the loading of faults at depth. We model the granul ...

Wiley2023

Torque Computation With the Isogeometric Mortar Method for the Simulation of Electric Machines

Rafael Vazquez Hernandez, Bernard Kapidani

In this work, isogeometric mortaring is used for the simulation of a six-pole permanent magnet synchronous machine. Isogeometric mortaring is especially well suited for the efficient computation of rotating electric machines, as it allows for an exact geom ...

Institute of Electrical and Electronics Engineers2022

Modelling and Sensors for Magnetically-Levitated Disc Drives

Juan Patricio Tomás Peralta Fierro

The development of new industrial applications has diverted the focus of research towards compacter and faster rotatory drives. These requirements push the classical ball-bearings of electric motors to the limits in terms of operational lifetime and fricti ...

EPFL2022

Modelling of AC/DC Interactions of Converter-Interfaced Resources for Harmonic Power-Flow Studies in Microgrids

Mario Paolone, Andreas Martin Kettner, Yihui Zuo, Johanna Kristin Maria Becker

Modern power distribution systems experience a large-scale integration of Converter-Interfaced Distributed Energy Resources (CIDERs). As acknowledged by recent literature, the interaction of individual CIDER components and different CIDERs through the grid ...

2022

Effective properties and eddy current losses of soft magnetic composites

Xiaotao Ren

This paper presents a semi-analytical homogenization model for Soft Magnetic Composites (SMCs), providing the effective magnetic behavior and the level of Eddy Current (EC) losses. Both linear and nonlinear magnetic behavior are considered. A magnetic circ ...

2021

Electrical effects in winding of large electrical ac machines application to advanced large size DFIM

Frédéric Michael Maurer

To meet the electrical grid's demand on pump power variation, GE Renewable Energy develops since 10 years variable speed machines (also called Doubly Fed Induction Generators or DFIG). Within turbogenerators, the phenomenon of circulating currents in Roebe ...

EPFL2019

Topology Optimization for Coils of Electric Machine with Level-set Method

Yves Perriard, Adrien Jean-Michel Thabuis, Xiaotao Ren

This work studies the level-set based topology optimization for the optimal layout of winding in electric motor. The functional to optimize is to maximize the torque in the air-gap. The coil domain is initiated by a level set function. The time evolutionar ...

IEEE2019

Performance and Micro-Vibrations in Magnetic Bearings for Space Actuators

Guzmán Borque Gallego

The development of new space missions with novel high-performance and very sensitive payloads for Earth observation or scientific missions has imposed considerably tougher requirements in terms of the satellite's pointing accuracy and stability, and thus o ...

EPFL2021

Very-High-Speed Miniaturized Permanent Magnet Motors: Modeling and Experimental Validation

Yves Perriard, Guillaume Paul-André Burnand

The purpose of this paper is to present an experimental method to separate losses components due to the rotation of the rotor in very-high-speed permanent magnet machines with ball bearings. In addition, it presents and validates an analytical model for th ...

2019

Characterization and Verification of Eddy-Current Position Sensing for Magnetic Levitation

Yves Perriard, Sean Thomas, Juan Patricio Tomás Peralta Fierro

Magnetically-levitated drives are compelling in applications where the long-lifetime operation or process chamber encapsulation is a requirement. To exploit these advantages, contactless position sensors are needed to estimate the position of the rotor. Of ...

2021

A low-cost, autonomous mobile platform for limnological investigations, supported by high-resolution mesoscale airborne imagery

David Andrew Barry, Ulrich Lemmin, Anton Ivanov, Htet Kyi Wynn, Stepan Tulyakov, Abolfazl Irani Rahaghi, Ludovic Zulliger, Jean-Luc Liardon, Philippe Olivier Paccaud, Beat Marcel Geissmann

Two complementary measurement systems – built upon an autonomous floating craft and a tethered balloon – for lake research and monitoring are presented. The autonomous vehicle was assembled on a catamaran for stability, and is capable of handling a variety ...

2019

Experimental Investigation of a Small-Scale Organic Rankine Cycle Turbo-Generator Supported on Gas-Lubricated Bearings

Jürg Alexander Schiffmann, Kévin Rosset

Waste heat recovery (WHR) is expected to contribute to reducing CO2 emissions from trucks. Organic Rankine cycle (ORC) systems show the highest potential for this application, but still lack efficient small-scale expansion devices, in practice. A novel tur ...

2021

Principles and Test Result of Novel Full Passive Magnetic Levitation Motor with Diamagnetic Disk

Hannes Bleuler

This paper proposes a novel full passive magnetic levitation motor without active magnetic suspension. It has a magnetic levitation unit and a motor unit. The Halbach array permanent magnets and a pyrolytic graphite (PG) disk realize the full passive magne ...

IEEE2021

High-Power DC–DC Converter Utilising Scott transformer Connection

Drazen Dujic, Stefan Milovanovic

To obtain a resilient and flexible DC grid, reliable means for interfacing its parts operating under different voltage levels must be ensured. This paper proposes bidirectional, isolated, DC–DC converter designed to connect either high/medium voltage bipol ...

2019

Prefrontal-Premotor Pathways and Motor Output in Well-Recovered Stroke Patients

Friedhelm Christoph Hummel

Structural brain imaging has continuously furthered our knowledge how different pathways of the human motor system contribute to residual motor output in stroke patients. Tract-related microstructure of pathways between primary and premotor areas has been ...

2019

Modelling and Fabrication of a Kirigami-Inspired Shape Memory Alloy Actuator

Yves Perriard, Thomas Guillaume Martinez, Sean Thomas, Marjan Ghorbani

Shape Memory Alloys (SMA) based actuators have increasingly been used in lightweight and compact actuators. In this paper, a novel kirigami-inspired SMA actuator is designed and presented. This work aims to show a novel way of fabricating large stroke flex ...

IEEE2021