Extended Windage Loss Models for Gas Bearing Supported Spindles Operated in Dense Gases

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

This research introduces an automated methodology for visualizing gas-bearing supported turbocompressor designs utilizing CadQuery 2, a scripting Computer-Aided Design (CAD) platform. This innovative approach simplifies the traditional design process, whic ...

The difficulty of determining the slope of the famed logarithmic law in the mean velocity profile of wall-bounded turbulent flows, the inverse of the K & aacute;rm & aacute;n "constant" kappa, from direct numerical simulations (DNS) is discussed for channe ...

This work focuses on understanding and identifying the drag forces applied to a rotary-wing Micro Aerial Vehicle (MAV). We propose a lumped drag model that concisely describes the aerodynamical forces the MAV is subject to, with a minimal set of parameters ...

The present invention concerns a method of manoeuvring a vertical take-off and landing, unmanned aerial drone (100) comprising at least an aerodynamic surface (101), wherein, during a flight of the drone, the aerodynamic surface generates lift and/or drag ...

Herringbone grooved journal bearings (HGJBs) are widely used in micro-turbocompressor applications due to their high load-carrying capacity, low friction, and oil-free solution. However, the performance of these bearings is sensitive to manufacturing devia ...

Fluids are pervasive in the Earth's crust and saturate fractures and faults. The combination of fluids and gouge layers developing along faults can generate fluids of different viscosities. Such viscous fluids were found to influence the reactivation, fric ...

Most of existing buildings are made of concrete, new buildings are being built with it and others are demolished when still in good structural condition. This drives increased demands for raw materials, greenhouse gas emissions, and an accumulation of demo ...

Existing theoretical analyses of Faraday waves in Hele-Shaw cells rely on the Darcy approximation and assume a parabolic flow profile in the narrow direction. However, Darcy's model is known to be inaccurate when convective or unsteady inertial effects are ...

In this thesis, the aerodynamic challenges in flapping wing flight are addressed. In particular, the effects of different wing kinematics, flexibilities, and planforms on the the leading edge vortex development and aerodynamic performance are investigated. ...

Machine learning has paved the way for the real-time monitoring of complex infrastructure and industrial systems. However, purely data-driven methods have not been able to learn the underlying dynamics and generalize them to operating conditions that have ...

Designing turbocompressors is a complex and challenging task, as it involves balancing conflicting objectives such as efficiency, stability, and robustness against manufacturing deviations. This paper proposes an integrated design methodology for turbocomp ...

In the evolution of structural glass beam elements, the requirements for post-fracture load bearing capacity and safe failure behaviour have led to the development of reinforced and post-tensioned beams. Maximum bending capacity in the post-fracture state ...

In this paper, transient granular flows are examined both numerically and experimentally. Simulations are performed using the continuous three-dimensional (3-D) granular model introduced in Daviet & Bertails-Descoubes (ACM Trans. Graph., vol. 35, no. 4, 20 ...

Thanks to their absence of play, absence of contact friction and possible monolithic fabrication, flexure pivots offer advantages over traditional bearings in small-scale, high accuracy applications and environments where lubrication and wear debris are pr ...

Understanding the aerodynamic coefficients of meteoroid fragments, deorbiting space debris, or launch vehicle stages through atmospheric reentry is essential for ground risk assessments. In high enthalpy flow, surface roughness is a crucial factor affectin ...

We propose here a method to experimentally quantify unsteady leading-edge flow separation on aerofoils with finite thickness. The methodology relies on the computation of a leading-edge suction parameter based on measured values of the partial circulation ...

The transition process from laminar stratified shear layer to fully developed turbulence is usually captured using direct numerical simulations, in which the computational cost is extremely high and the numerical domain size is limited. In this work, we in ...

This open access book allows the reader to grasp the main bulk of fluid flow problems at a brisk pace. Starting with the basic concepts of conservation laws developed using continuum mechanics, the incompressibility of a fluid is explained and modeled, lea ...

Accretion disks surrounding compact objects, and other environmental factors, deviate satellites from geodetic motion. Unfortunately, setting up the equations of motion for such relativistic trajectories is not as simple as in Newtonian mechanics. The prin ...

Extended Windage Loss Models for Gas Bearing Supported Spindles Operated in Dense Gases

Chat with Graph Search

PARATURBOCAD: AUTOMATED PARAMETRIC GEOMETRY CONSTRUCTION FOR GAS-BEARING SUPPORTED TURBOCOMPRESSOR DESIGN WITH PYTHON

On the difficulty of determining Kármán "constants" from direct numerical simulations

Lumped Drag Model Identification and Real-Time External Force Detection for Rotary-Wing Micro Aerial Vehicles

Method for wind harvesting and wind rejection in flying drones

Robust Design of Herringbone Grooved Journal Bearings using Multi-Objective Optimization with Artificial Neural Networks

Robust Design of Herringbone Grooved Journal Bearings using Multi-Objective Optimization with Artificial Neural Networks

Influence of Viscous Lubricant on Nucleation and Propagation of Frictional Ruptures

Low-tech methods for the reuse of reinforced concrete structural elements

A revised gap-averaged Floquet analysis of Faraday waves in Hele-Shaw cells

The effects of kinematics, flexibility, and planform on the vortex formation and aerodynamic performance of flapping wing flight

Graph neural networks for dynamic modeling of roller bearings

An Integrated Approach to Designing Robust Turbocompressors on Gas Bearings Through Surrogate Modeling and Constrained Multi-Objective Optimization

Exploring the potential of the critical shear crack theory for reinforced and post-tensioned glass beams: Initial analysis and experiments

Revisiting the role of friction coefficients in granular collapses: confrontation of 3-D non-smooth simulations with experiments

Triple Crossed Flexure Pivot Based on a Zero Parasitic Center Shift Kinematic Design

Experimental investigation of surface roughness effect on a free-flight sphere in a Ludwieg tube

Experimental quantification of unsteady leading-edge flow separation

A Gradient Tensor-Based Subgrid-Scale Parameterization for Large-Eddy Simulations of Stratified Shear Layers Using the Weather Research and Forecasting Model

An Introduction to the Mechanics of Incompressible Fluids

Covariant formulation of relativistic mechanics