Modeling of a Multitube High-Temperature Solar Thermochemical Reactor for Hydrogen Production

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

With the advances in clean technologies, the role of fuel cells and batteries is becoming increasingly vital. Proton exchange membrane fuel cells are known to be the best candidates for low-temperature and portable operations, such as hydrogen cars. The ef ...

This study reports the development of a new Ti-Zr-Mn-based AB 2 type hydrogen storage alloys for a two-stage metal hydride hydrogen compressor (MHHC). The hydrogen storage alloys are designed to compress hydrogen from 35 to 865 bar within a temperature dif ...

Zirconium-based cladding tubes, mainly used as fuel cladding materials in light water reactors, serve as the primary barrier insulating the radioactive fission products from the environment. During operation, the cladding interacts with the coolant water, ...

Green hydrogen production via electrochemical water splitting is a promising approach for future sustainable energy and industry. Among the existing water electrolysis technologies, solid oxide steam electrolysis exhibits the highest electrical efficiency, ...

Due to the increasing concerns about the marked dependence on fossil resources and their intrinsic economic uncertainty, as well as motivated by more stringent environmental regulations, the pursuit of alternative energy resources for the synthetic fertili ...

Graphdiyne (GDY) with a direct bandgap, high charge carrier mobility, and ordered pore structure, is considered an excellent matrix for the construction of heterojunction photocatalysts. However, the traditional fabrication methods for GDY-based heterojunc ...

Photoelectrochemical cells employing organic semiconductors (OS) are promising for solar-to-fuel conversion via water splitting. However, despite encouraging advances with the half reactions, complete overall water splitting remains a challenge. Herein, a ...

Heat transfer measurements of flow boiling Carbon Dioxide (CO2) in vertical upward direction have been carried out with a dedicated test facility at the European Organization for Nuclear Research (CERN). The experiments have been conducted in a vertical up ...

Direct air capture using solid adsorbents is a proven technology critical to reducing our net greenhouse gas emissions to zero and beyond. Currently, academic research into the technology mainly focuses on the devel-opment of new adsorbents. However, there ...

The pursuit of alternative energy sources for the nitrogen fertilizers sector has recently earned renewed interest due to increasing concerns regarding the world dependence on non-renewable energy resources and also motivated by the more stringent environm ...

Semiconducting delafossite-phase CuFeO2 is a promising photocathode material for solar-driven hydrogen production given its suitable energy levels and established robustness for photoelectrochemical water reduction. Nevertheless, reported methods for prepa ...

Sequentially stacked impingement channels allow for a more effective use of the cooling fluid and can limit the heat transfer reduction due to the crossflow when the number of jets increases. In this paper, sequential impingement channels are experimentall ...

With the advancement of technologies such as Artificial Intelligence and 5G telecommunications, where computational rate is constantly pushing its limits, highly efficient and reliable cooling devices are starting to become an overly critical factor. Not o ...

This work presents a data-driven Reduced-Order Model (ROM) for parametric convective heat transfer problems in porous media. The intrusive Proper Orthogonal Decomposition aided Reduced-Basis (POD-RB) technique is employed to reduce the porous medium formul ...

Recent numerical advancements at the Laboratory for Reactor Physics and Systems Behaviour (LRS) have led to the development of a novel two-phase porous medium-based thermal-hydraulic simulation tool, integrated in the broader multi-physics framework of the ...

Thermochemical biomass-to-fuel conversion requires an increased hydrogen concentration in the syngas derived from gasification, which is currently achieved by water–gas-shift reaction and CO2 removal. State-of-the-art biomass-to-fuels convert less than hal ...

The microstructure of porous materials has a significant effect on their transport properties. Engineered cellular ceramics can be designed to exhibit properties at will, thanks to the advances in additive manufacturing. We investigated the heat and mass t ...

We present a strategy to produce porous NiTiO3/TiO2 nanostructures with excellent photocatalytic activity toward hydrogen generation. In a first step, nickel-doped TiO2 needle bundles were synthesized by a hydrothermal procedure. Through the sintering in a ...

The objective of the current work is to support the design of a pilot hydrogen and electricity producing plant that uses natural gas (or biomethane) as raw material, as a transition option towards a 100% renewable transportation system. The plant, with a s ...

The catalytic effect of nitrogen incorporation into Mo on hydrogenation (of -NO2 to -NH2 in nitrobenzene to aniline) and hydrogenolysis (of -C?O in benzaldehyde to toluene) processes has been assessed. Bulk Mo was prepared by temperature programmed reducti ...

Modeling of a Multitube High-Temperature Solar Thermochemical Reactor for Hydrogen Production

Chat with Graph Search

Advanced imaging of gas diffusion layers: A comparison between focused ion beam scanning electron microscopy and X-ray computed tomography

Development of Ti-Zr-Mn based AB 2 type metal hydrides alloys for an 865 bar two-stage hydrogen compressor

Investigation of Hydrogen Behaviour in Irradiated Zirconium-Based Fuel Claddings by Neutron Imaging and Complementary Techniques

Techno-economic analysis of solar hydrogen production via PV power/concentrated solar heat driven solid oxide electrolysis with electrical/thermal energy storage

Comparative Exergy and Economic Assessment of Fossil and Biomass-Based Routes for Ammonia Production

In situ construction of graphdiyne based heterojunctions by a deprotection-free approach for photocatalytic hydrogen generation

An Organic Semiconductor Photoelectrochemical Tandem Cell for Solar Water Splitting

Heat transfer of flow boiling carbon dioxide in vertical upward direction

Process-informed adsorbent design guidelines for direct air capture

Integrated production of urea and nitric acid in the pulp industry: techno-economic and environmental analysis of black liquor gasification-based processes

Spray Synthesis of CuFeO2 Photocathodes and In-Operando Assessment of Charge Carrier Recombination

Experimental investigation of sequential narrow impingement channels for turbine cooling

Novel pulsating heat pipe for high density power data centres: performance and flow regime analysis

Data-Driven Reduced-Order Modeling of Convective Heat Transfer in Porous Media

Development of a novel two-phase flow solver for nuclear reactor analysis: Validation against sodium boiling experiments

Techno-economic evaluation of biomass-to-fuels with solid-oxide electrolyzer

Pressure Drop and Convective Heat Transfer in Different SiSiC Structures Fabricated by Indirect Additive Manufacturing

Porous NiTiO3/TiO2 nanostructures for photocatatalytic hydrogen evolution

Design of a Pilot SOFC System for the Combined Production of Hydrogen and Electricity under Refueling Station Requirements

New insights into the effect of nitrogen incorporation in Mo: catalytic hydrogenation vs. hydrogenolysis