AC loss and electrical resistance of the RW3 diffusion-bonded joint

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Nuclear fusion provides a potentially unlimited and clean energy source which motivates the development of fusion power plants. The tokamak is one of the most promising concepts for a future reactor, confining the fusion plasmas in a torus using strong mag ...

Power exhaust is a crucial issue for future fusion reactors. Divertor detachment and the required power dissipation fractions of about 95% are foreseen to be achieved by impurity seeding. In a tokamak, at high seeding levels the radiation often concentrate ...

Probing the neutral gas distribution at the edge of magnetic confinement fusion devices is critical for plasma exhaust studies. In the TCV tokamak, a set of ASDEX-type hot ionization pressure gauges (APGs) has been installed for fast, in situ measurements ...

The need of full transposition of the current carrying elements (strands) in large cables is frequently retained as top design criterion for conductors operating in pulsed mode. However, when the transposition error, i.e., the inductance difference among t ...

The magnet feeders are part of the critical systems of a fusion reactor since they represent the interface between the in-cryostat components at 4.5 K and the room-temperature cryogenic plant and power supply. The European DEMO tokamak foresees 16 toroidal ...

Electrically connected and plasmonically enhanced molecular junctions combine the optical functionalities of high field confinement and enhancement (cavity function), and of high radiative efficiency (antenna function) with the electrical functionalities o ...

The design point that had been chosen for EU DEMO in 2016 is reviewed here and a modification is proposed with a lower aspect ratio. Previously the same aspect ratio, A, was chosen for EU DEMO as in major tokamak experiments including ITER (A = 3.1), and, ...

We study the magneto-rotational instability (MRI) dynamo in a geometrically thin disc (H/R < 1) using stratified zero net (vertical) flux shearing box simulations. We find that mean fields and electromotive forces (EMFs) oscillate with a primary frequency ...

The superconducting magnet system of the Divertor Tokamak Test (DTT) facility, composed of 18 toroidal field (TF) coils, 6 poloidal field coils and a central solenoid, has been designed and many procurements have been launched. Some manufacturing aspects a ...

In order to cope with the decarbonization challenge faced by many countries, fusion is one of the few alternatives to fossil fuels for the production of electricity. Two devices invented in the middle of the previous century have emerged as the most promis ...

The pyroresistive response of conductive polymer composites (CPCs) has attracted much interest because of its potential applications in many electronic devices requiring a significant responsiveness to changes in external physical parameters such as temper ...

An optimized plasma current ramp-down strategy is critical for safe and fast termination of plasma discharges in a tokamak demonstration fusion reactor (DEMO), both in planned and emergency scenarios, avoiding plasma disruptions and excessive heat loads to ...

In recent years, negative triangularity (NT) has emerged as a potential high-confinement L-mode reactor solution. In this work, detachment is investigated using core density ramps in lower single null Ohmic L-mode plasmas across a wide range of upper, lowe ...

The experimental fusion reactor ITER will feature two (or three) heating neutral beam injectors (NBI) capable of delivering 33(or 50) MW of power into the plasma. A NBI consists of a plasma source for production of negative ions (extracted negative ion cur ...

A modular multiple frequency coils inductive link system to wirelessly provide power for at least a medical implant at an output of a receiving coil, whereby the receiving coil is configured to be implanted in an organism. The modular multiple frequency co ...

Negative triangularity (NT) scenarios in TCV have been compared to positive triangularity (PT) scenarios using the same plasma shapes foreseen for divertor tokamak test tokamak operations. The experiments provided a NT/PT L-mode pair and a PT H-mode with d ...

The ubiquitous mode is investigated in the linear regime for the first time using a global gyrokinetic model. These modes are driven by the density gradient in trapped electron population but with mode frequency in the ion diamagnetic drift direction, in c ...

In the past decades, a significant increase of the transistor density on a chip has led to exponential growth in computational power driven by Moore's law. To overcome the bottleneck of traditional von-Neumann architecture in computational efficiency, effo ...

Plasmas with negative triangularity (NT) shape have been recently shown to be able to achieve H-mode levels of confinement in L-mode, avoiding detrimental edge localised modes. Therefore, this plasma geometry is now studied as a possible viable option for ...

Two reduced models for predicting detachment onset and divertor reattachment times are validated on MAST Upgrade (MAST-U). These models are essential for future tokamak reactor design, providing rapid calculations based primarily on engineering parameters. ...

AC loss and electrical resistance of the RW3 diffusion-bonded joint

Chat with Graph Search

Impurity-seeded detachment in conventional and optimized TCV divertor geometry

X-point radiation: From discovery to potential application in a future reactor

Neutral pressure measurement in TCV tokamak using ASDEX-type pressure gauges

Performance Comparison of Cables With Partial Transposition

The magnet feeders for the European DEMO fusion reactor: Conceptual design and recent advances

Light Emission and Conductance Fluctuations in Electrically Driven and Plasmonically Enhanced Molecular Junctions

Re-design of EU DEMO with a low aspect ratio

Shedding light on the MRI-driven dynamo in a stratified shearing box

DTT toroidal field conductor samples test in Sultan: DC and AC characterization

Global fluid simulations of plasma turbulence in stellarators

Pyroresistive response of percolating conductive polymer composites

Scenario optimization for the tokamak ramp-down phase in RAPTOR. Part B: safe termination of DEMO plasmas

Comparison of detachment in Ohmic plasmas with positive and negative triangularity

Optimizing the ITER NBI ion source by dedicated RF driver test stand

A modular multiple frequency inductive link to wirelessly power multiple miniaturized implants

Experiments and gyrokinetic simulations of TCV plasmas with negative triangularity in view of DTT operations

Global gyrokinetic study of density gradient driven instability in tokamaks: the ubiquitous mode

Towards Scalable Electronics: Synthetic 2D Materials for Large-Area 2D Circuit Integration

First-principle based predictions of the effects of negative triangularity on DTT scenarios

Validating reduced models for detachment onset and reattachment times on MAST-U