Publications related to Analysis of Spiral-Grooved Gas Journal Bearings by the Narrow-Groove Theory and the Finite Element Method At Large Eccentricities

Stability: a search for structure

In this thesis we study stability from several viewpoints. After covering the practical importance, the rich history and the ever-growing list of manifestations of stability, we study the following. (i) (Statistical identification of stable dynamical syste ...

EPFL2024

The Strong Integral Input-to-State Stability Property in Dynamical Flow Networks

Nils Gustav Nilsson

Dynamical flow networks serve as macroscopic models for, e.g., transportation networks, queuing networks, and distribution networks. While the flow dynamics in such networks follow the conservation of mass on the links, the outflow from each link is often ...

Ieee-Inst Electrical Electronics Engineers Inc2024

Noise-induced transitions past the onset of a steady symmetry-breaking bifurcation: The case of the sudden expansion

François Gallaire, Edouard Boujo, Yves-Marie François Ducimetière

We consider fluid flows, governed by the Navier-Stokes equations, subject to a steady symmetry-breaking bifurcation and forced by a weak noise acting on a slow timescale. By generalizing the multiple-scale weakly nonlinear expansion technique employed in t ...

2024

Instability and trajectories of buoyancy-driven annular disks: A numerical study

François Gallaire, Pier Giuseppe Ledda, Giovanni Vagnoli

We investigate the stability of the steady vertical path and the emerging trajectories of a buoyancy -driven annular disk as the diameter of its central hole is varied. The steady and axisymmetric wake associated with the steady vertical path of the disk, ...

Amer Physical Soc2024

Adaptive Finite Elements with Large Aspect Ratio. Application to Aluminium Electrolysis

Paride Passelli

The goal of this work is to use anisotropic adaptive finite elements for the numerical simulation of aluminium electrolysis. The anisotropic adaptive criteria are based on a posteriori error estimates derived for simplified problems. First, we consider an ...

EPFL2024

Identifying invariant solutions of wall-bounded three-dimensional shear flows using robust adjoint-based variational techniques

Tobias Schneider, Omid Ashtari

Invariant solutions of the Navier-Stokes equations play an important role in the spatiotemporally chaotic dynamics of turbulent shear flows. Despite the significance of these solutions, their identification remains a computational challenge, rendering many ...

Cambridge University Press2023

Numerical simulation of immiscible incompressible viscous, viscoelastic and elastic multiphase flows

Léo Aurélio Diserens

A unified numerical framework is presented for the modelling of multiphasic viscoelastic and elastic flows. The rheologies considered range from incompressible Newtonian or Oldroyd-B viscoelastic fluids to Neo-Hookean elastic solids. The model is formulate ...

EPFL2023

Low-Temperature Dynamics of Water Confined in Unidirectional Hydrophilic Zeolite Nanopores

Livia Eleonora Bove Kado, Umbertoluca Ranieri, Maria Rescigno

The dynamical properties of water molecules confinedin the unidirectionalhydrophilic nanopores of AlPO4-54 are investigated withquasi-elastic neutron scattering as a function of temperature downto 118 K. AlPO4-54 has among the largest pores known foralumin ...

AMER CHEMICAL SOC2023

The dynamics of unsteady frictional slip pulses

Fabian Barras, Thibault Didier Roch

Self-healing slip pulses are major spatiotemporal failure modes of frictional systems, featuring a characteristic size L(t) and a propagation velocity c(p)(t) (t is time). Here, we develop a theory of slip pulses in realistic rate- and state-dependent fric ...

National Academy of Sciences2023

A fully-coupled highly-parallelized geomechanical simulator for assessing induced seismicity

Jean-François Molinari, Guillaume Anciaux, Nicolas Richart, Brice Tanguy Alphonse Lecampion, Emil Gallyamov

Induced seismicity caused by anthropogenic modification of the subsurface effective stress state has been observed in a number of industrial applications -- from hydrocarbon extraction (e.g., Groningen [1]), drilling waste-water disposal (e.g., [2]) to the ...

2023

Weakly nonlinear versus semi-linear models of the nonlinear evolution of the centrifugal instability

François Gallaire, Eunok Yim

We carry out a weakly nonlinear analysis of the centrifugal instability for a columnar vortex in a rotating fluid, and compare the results to those of the semi-linear model derived empirically by Yim et al. (J. Fluid Mech., vol. 897, 2020, A34). The asympt ...

Cambridge University Press2023

A Fast Hybrid Pressure-Correction Algorithm for Simulating Incompressible Flows by Projection Methods

Jiannong Fang

To enforce the conservation of mass principle, a pressure Poisson equation arises in the numerical solution of incompressible fluid flow using the pressure-based segregated algorithms such as projection methods. For unsteady flows, the pressure Poisson equ ...

2023

Adaptive Symplectic Model Order Reduction Of Parametric Particle-Based Vlasov-Poisson Equation

Cecilia Pagliantini, Jan Sickmann Hesthaven, Nicolò Ripamonti

. High-resolution simulations of particle-based kinetic plasma models typically require a high number of particles and thus often become computationally intractable. This is exacerbated in multi-query simulations, where the problem depends on a set of para ...

AMER MATHEMATICAL SOC2023

Permeability sets the linear path instability of buoyancy-driven disks

François Gallaire, Pier Giuseppe Ledda, Giuseppe Antonio Zampogna, Giovanni Vagnoli

The prediction of trajectories of buoyancy-driven objects immersed in a viscous fluid is a key problem in fluid dynamics. Simple-shaped objects, such as disks, present a great variety of trajectories, ranging from zig-zag to tumbling and chaotic motions. Y ...

Cambridge University Press2023

From thin plates to Ahmed bodies: linear and weakly nonlinear stability of rectangular prisms

Edouard Boujo, Giuseppe Antonio Zampogna

We study the stability of laminar wakes past three-dimensional rectangular prisms. The width-to-height ratio is set to W/H = 1.2, while the length-to-height ratio 1/6 < L/H < 3 covers a wide range of geometries from thin plates to elongated Ahmed bodies. F ...

Cambridge University Press2023

Indentation and stability of woven domes

Célestin Vallat, Pedro Miguel Nunes Pereira de Almeida Reis, Tomohiko Sano, Tian Chen, Samuel Jean Bernard Poincloux

Discrete domes are doubly curved structures comprising a network of beam-like elements. We study the mechanics of discrete domes made of ribbons woven in a pentagonal triaxial pattern. Experiments and finite element simulations are performed to characteriz ...

ELSEVIER2023

Model order reduction for compressible flows solved using the discontinuous Galerkin methods

Jan Sickmann Hesthaven

Projection-based reduced order models (ROM) based on the weak form and the strong form of the discontinuous Galerkin (DG) method are proposed and compared for shock-dominated problems. The incorporation of dissipation components of DG in a consistent manne ...

ACADEMIC PRESS INC ELSEVIER SCIENCE2022

Microscopic field theory for structure formation in systems of self-propelled particles with generic torques

Ignacio Pagonabarraga Mora, Elena Sesé Sansa

We derive a dynamical field theory for self-propelled particles subjected to generic torques and forces by explicitly coarse-graining their microscopic dynamics, described by a many-body Fokker-Planck equation. The model includes both intrinsic torques ind ...

AIP Publishing2022

Numerical and experimental investigation of spiral-grooved gas journal bearings

Elia Iseli

Small-scale turbomachinery is increasingly used in carbon-free energy conversion systems, such as commercial or domestic scale heat pumps, fuels cells for transportation and waste heat recovery. The usage of aerodynamic bearings allows the design of compac ...

EPFL2022

Non-destructive Prediction of the Buckling Load of Cylindrical Shells

Emilio José Lozano Vazquez

The current research focuses on the prediction of the maximum axial compression load a cylindrical shell is able to bear. This maximum axial compression load is the value at which a cylindrical shell loses stability and abruptly buckles. After the buckling ...

EPFL2022