Publications related to Unravelling ultralow thermal conductivity in perovskite Cs2AgBiBr6: dominant wave-like phonon tunnelling and strong anharmonicity

Related publications (21)

Localized Tunneling 1D Perovskitoid Passivated Contacts for Efficient and Stable Perovskite Solar Modules

Mohammad Khaja Nazeeruddin, Yong Ding, Kai Zhang

Interface engineering has proven to be an effective approach for passivating interfacial imperfections to mitigate non-radiative recombination, but the subpar interface quality between the perovskite and the charge transport layer has hindered advancements ...

2025

High-Efficiency Carbon Perovskite Solar Cells via Cathode Interface Engineering by using CuPc Hole-Transporting Layers

Mohammad Khaja Nazeeruddin

Carbon perovskite solar cells (C-PSCs) represent a promising photovoltaic (PV) technology that addresses the long-term operating stability needed to compete with commercial Si solar cells. However, the poor interface contacts between the carbon electrode a ...

2025

Unveiling the complex phonon nature and phonon cascades in 1L to 5L WSe2 using multiwavelength excitation Raman scattering

Claire Valentine Blaga, Anna Fontcuberta i Morral, Mirjana Dimitrievska, Mitali Banerjee

Tungsten diselenide (WSe2) is a 2D semiconducting material, promising for novel optoelectronic and phononic applications. WSe2 has complex lattice dynamics and phonon structure. Numerous discrepancies in the literature exist regarding the interpretation an ...

Royal Society of Chemistry (RSC)2024

Towards Quantitative Terahertz Characterisation of Zinc Phosphide Thin Films for Photovoltaic Applications

Anna Fontcuberta i Morral, Jean-Baptiste Leran, Simon Robert Escobar Steinvall, Elias Zsolt Stutz, Rajrupa Paul, Mirjana Dimitrievska, Léa Buswell

The earth-abundant and non-toxic material Zinc phosphide (Zn3P2) is a promising candidate for solar cell applications. However, growth of defect-free, high-quality thin films on substrates that can integrate with current technology (e.g. silicon) remains c ...

IEEE Computer Society2024

Cu(II) and Ni(II) Phthalocyanine-Based Hole-Transporting Materials for Stable Perovskite Solar Cells with Efficiencies Reaching 20.0%

Mohammad Khaja Nazeeruddin, Jianxing Xia

Herein, Cu(II)Pcs and Ni(II)Pcs peripherally tetra-functionalized with 5-hexylthiophene (HT), 5-hexyl-2,2 '-bithiophene (HBT), and tertbutyl groups (TB) are readily synthesized and employed as hole-transporting materials (HTMs) in mixed-ion perovskite ([FA ...

WILEY-V C H VERLAG GMBH2024

Assessing the Influence of Illumination on Ion Conductivity in Perovskite Solar Cells

Christophe Ballif, Aïcha Hessler-Wyser, Christian Michael Wolff, Mostafa Rabie Shlaly Bahr Othman

Whether illumination influences the ion conductivity in lead-halide perovskite solar cells containing iodide halides has been an ongoing debate. Experiments to elucidate the presence of a photoconductive effect require special devices or measurement techni ...

2024

First-principles characterization of thermal conductivity in LaPO 4 -based alloys

Nicola Marzari, Michele Simoncelli

Alloys based on lanthanum phosphate (LaPO4) are often employed as thermal barrier coatings, due to their low thermal conductivity and structural stability over a wide temperature range. To enhance the thermal-insulation performance of these alloys, it is e ...

American Physical Society (APS)2024

Reconstruction of Electron-Selective Interface via Multifunctional Chemical Bridging Enables High-Performance Rigid and Flexible Perovskite Solar Cells

Jianxing Xia

Interface engineering has significantly boosted perovskite solar cell efficiency and stability. However, numerous approaches focus on addressing defects at the interfaces between transport layers while neglecting potential issues within the bulk perovskite ...

2024

Supramolecular Modulation for Hybrid Perovskite Photovoltaics

Michael Graetzel, Shaik Mohammed Zakeeruddin, Felix Thomas Eickemeyer, Hong Zhang, Jovana Milic, Ghewa Alsabeh, Masaud Hassan S Almalki

Hybrid perovskites are emerging as top contenders in the next generation of photovoltaics, yet their stability under operational conditions remains a significant challenge. Specifically, degradation occurs at the interface with charge transport layers in p ...

2024

Indoor Self-Powered Perovskite Optoelectronics with Ultraflexible Monochromatic Light Source

Hiroaki Jinno, Felix Thomas Eickemeyer, Lukas Pfeifer

Self-powered skin optoelectronics fabricated on ultrathin polymer films is emerging as one of the most promising components for the next-generation Internet of Things (IoT) technology. However, a longstanding challenge is the device underperformance owing ...

Wiley-V C H Verlag Gmbh2023

Buried Interface Engineering Enables Efficient and 1,960-hour Isos-L-2i Stable Inverted Perovskite Solar Cells

Michael Graetzel, Shaik Mohammed Zakeeruddin, Ursula Röthlisberger, Felix Thomas Eickemeyer, Xiong Li, Mathias Dankl, Mingyang Wei, Virginia Carnevali, Nikolaos Lempesis, Lorenzo Agosta

High-performance perovskite solar cells (PSCs) typically require interfacial passivation, yet this is challenging for the buried interface, owing to the dissolution of passivation agents during the deposition of perovskites. Here, we overcome this limitati ...

Zenodo2023

Poly(3-hexylthiophene)/perovskite Heterointerface by Spinodal Decomposition Enabling Efficient and Stable Perovskite Solar Cells

Mohammad Khaja Nazeeruddin

The best research-cell efficiency of perovskite solar cells (PSCs) is comparable with that of mature silicon solar cells (SSCs); However, the industrial development of PSCs lags far behind SSCs. PSC is a multiphase and multicomponent system, whose conseque ...

Wiley-V C H Verlag Gmbh2023

Rear textured p-type high temperature passivating contacts and their implementation in perovskite/silicon tandem cells

Christophe Ballif, Sylvain Nicolay, Quentin Thomas Jeangros, Antoine Descoeudres, Soo-Jin Moon, Andrea Ingenito, Philippe Wyss, Arnaud Walter

Silicon solar cells based on high temperature passivating contacts are becoming mainstream in the photovoltaic industry. Here, we developed a high-quality boron-doped poly-silicon hole contact. When combined with a co-processed phosphorus-doped poly-silico ...

Royal Soc Chemistry2023

CNT-based bifacial perovskite solar cells towards highly efficient 4-terminal tandem photovoltaics

Michael Graetzel, Shaik Mohammed Zakeeruddin, Hongwei Zhu, Fan Fu, Chunyang Zhang

Carbon-based perovskite solar cells (C-PSCs) are recognized as low-cost stable photovoltaics. However, currently most highly efficient C-PSCs are optically opaque, which means that they can only utilize direct illumination but cannot efficiently utilize th ...

2022

Molecular Vibration Explorer: an Online Database and Toolbox for Surface-Enhanced Frequency Conversion and Infrared and Raman Spectroscopy

Christophe Marcel Georges Galland

We present Molecular Vibration Explorer, a freely accessible online database and interactive tool for exploring vibrational spectra and tensorial lightvibration coupling strengths of a large collection of thiolated molecules. The "Gold" version of the data ...

AMER CHEMICAL SOC2022

Maltose as an Ecofriendly Modifier of the Buried Interface for Efficient and Stable Inverted Perovskite Solar Cells

Hong Zhang

A new concept of modifying the buried interface with ecofriendly material to improve the photovoltaic performance of inverted perovskite solar cells (PSCs) is proposed. A low-cost and ecofriendly maltose with multihydroxyl groups is facilely chosen for the ...

WILEY-V C H VERLAG GMBH2022

Composition and Interface Engineering of High Performing Perovskite Solar Cells

Mousa Abdulla M E Abuhelaiqa

Perovskite solar cells have been established as a disruptive technology in the domain of photo-voltaics. Their facile, low-temperature processing and high-power conversion efficiency make them stand-out among other mature solar technologies. The performanc ...

EPFL2022

Perovskite Solar Cells with Carbon-Based Electrodes - Quantification of Losses and Strategies to Overcome Them

Ulf Anders Hagfeldt, Bowen Yang, Jiajia Suo

Carbon-based electrodes represent a promising approach to improve stability and up-scalability of perovskite photovoltaics. The temperature at which these contacts are processed defines the absorber grain size of the perovskite solar cell: in cells with lo ...

WILEY-V C H VERLAG GMBH2022

Construction of Fe3O4 bridged Pt/g-C3N4 heterostructure with enhanced solar to fuel conversion

Michael Graetzel, Shaik Mohammed Zakeeruddin

In this study, we report the effects of co-catalysts of Pt nanoparticles and Fe3O4 clusters on photocatalytic behaviors of g-C3N4 (CN) and the use of the resulting photocatalyst for CO2 photoreduction to solar fuels in a flow reactor operated at room-tempe ...

ELSEVIER2022

Corrosion testing of solar cells: Wear-out degradation behavior

Christophe Ballif, Alessandro Francesco Aldo Virtuani, Andrew Wayne Fairbrother, Luca Gnocchi

Corrosion is one of the main end-of-life degradation and failure modes in photovoltaic (PV) modules. However, it is a gradual process and can take many years to become a major risk factor because of the slow accumulation of water and acetic acid (from enca ...

ELSEVIER2022