Publications related to Magnetic and electrostatic effects on the polymerization of water-soluble monomers

Related publications (32)

Soft Mechanochemistry of Disulfide-Crosslinked Polymer Networks

Mechanochemistry harnesses mechanical force to facilitate chemical reactions. Traditionally, the field of polymer mechanochemistry has used methods to activate chemical bonds, which use forces that are larger than those that are required to break a covalen ...

EPFL2024

Biobased Composites from Eugenol- and Coumarin-Derived Methacrylic Latex and Hemp Nanocellulose: Cross-Linking via [2+2] Photocycloaddition and Barrier Properties

Yves Leterrier, Sara Dalle Vacche

A novel-biobased latex was synthesized by redox-initiated emulsion copolymerization of ethoxy dihydroeugenyl methacrylate with 5 wt % of a photosensitive methacrylate containing a coumarin group. A stable copolymer latex having 16 wt % solids content and a ...

Amer Chemical Soc2024

Near-Room-Temperature Detection of Aromatic Compounds with Inkjet-Printed Plasticized Polymer Composites

Jürgen Brugger, Thomas Maeder, Mohammadmahdi Kiaee

Chemiresistive gas sensors composed of a thermoplastic polymer matrix and conductive fillers offer various advantages for detecting volatile organic compounds (VOCs), including low power consumption due to near-room-temperature operation, high sensitivity, ...

Amer Chemical Soc2024

Reinforced Supramolecular Networks of End Functionalized Polymers for Tailored Thermomechanical Property Profiles

Yevhen Hryshunin

Thermoset rubbers give rise to elastomers with tunable stiffness and high resilience but are not recyclable. Thermoplastic elastomers can address this problem but their broad applicability is impeded by either limited operating temperatures or inferior ela ...

EPFL2023

Mutant aerolysin and uses thereof

Matteo Dal Peraro, Chan Cao

Provided herein are aerolysin polypeptides and/or mutant aerolysin monomers comprising modified amino acid sequences that could have improved substrate analyte, such as (poly)nucleotide and peptide, improved reading properties such as enhanced substrate an ...

2024

Supramolecular Modifications of Semicrystalline Polymers

Michael Alan Giffin

Supramolecular interactions play an important role in defining the structure and the resulting mechanical properties of materials. For instance, interchain hydrogen-bonding in PAs gives them superior strength and stiffness in engineering materials, while t ...

EPFL2023

The Structural Dispersity of Oligoethylene Glycol-Containing Polymer Brushes Determines Their Interfacial Properties

Harm-Anton Klok

Ought to their bioinert properties and facile synthesis, poly[(oligoethylene glycol)methacrylate]s (POEGMAs) have been raised as attractive alternatives to poly(ethylene glycols) (PEGs) in an array of (bio)material applications, especially when they are ap ...

Amer Chemical Soc2024

Effects of Electrode Design on the Melt Electrowriting of Sinusoidal Structures

Biranche Tandon

Melt electrowriting is a microscale manufacturing technique that uses polymer-based melts to create fibrous structures. An electric field is used to stabilize a continuous molten jet, which is then written onto a substrate as a microscale fiber. Herein, it ...

WILEY-V C H VERLAG GMBH2023

New Polymers from Biomass-Derived Hydroxycinnamic Acid Derivatives

Ghezae Tekleab

Polymers play a central role in shaping our world across various fields, but their heavy reliance on petrochemicals poses climate change, environmental and health risks. To address and alleviate these issues, transitioning to sustainable polymers, sourced ...

EPFL2024

Performance Comparison of Shape Memory Polymer Structures Printed by Fused Deposition Modeling and Melt Electrowriting

Jürgen Brugger, Arnaud Bertsch, Reza Farsi, Biranche Tandon, Taavet Kangur

Fused deposition modeling (FDM) and melt electrowriting (MEW) are techniques that use polymer fibers as building blocks for printing complex 3D structures, with fibers at the macroscopic and micrometer scale. Here, FDM and MEW are used to produce fibers of ...

Wiley2024

Biocompatible and Biodegradable 3D Printing from Bioplastics: A Review

Sandro Carrara

There has been a lot of interest in developing and producing biodegradable polymers to address the current environmental problem caused by the continued usage of synthetic polymers derived from petroleum products. Bioplastics have been identified as a poss ...

MDPI2023

Supramolecular Polymer Brushes

Friederike Katharina Metze

Thin polymer coatings present a method to modify the surface properties of underlying substrates. Polymer-coated surfaces have been used as anticorrosive materials, surfaces with special wetting properties, antifriction materials, and as materials for biom ...

EPFL2023

Enabling simultaneous reprocessability and fire protection via incorporation of phosphine oxide monomer in epoxy vitrimer

Véronique Michaud, Valentin Rougier

The conception of epoxy thermosets with both reprocessability and flame retardancy delineates a new horizon in polymer science, offering a material solution that is not only superior in fire safety but is also environment friendly. Herein, a flame-retardan ...

Journal Mater Sci Technol2024

Recycling of Polymerase Chain Reaction (PCR) Kits

Francesco Stellacci, Yong Zhu, Weina Liu

Polymerase chain reaction (PCR) kits have been used as common diagnosing tools during the outbreak of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) pandemic, with daily worldwide usage in the millions. It is well known that at the beginn ...

AMER CHEMICAL SOC2023

Ion Adsorption Enhances Apparent Nonelectrostatic Attraction between Monomers in Polyelectrolyte Brushes

Harm-Anton Klok

Polyelectrolyte brushes are responsive to salt in the environment, and this has found broad applications in antifouling, biolubrication, and drug delivery. Salt primarily influences the conformation of the polyelectrolytes through ion adsorption. While ion ...

American Chemical Society2024

Tailor-made Piezoelectric Elastomer Materials

Francis Owusu

Recent advancements in miniature devices with higher computational capabilities and ultralow power consumption have accelerated the development of wearable sensors, actuators, and energy harvesters everywhere. The ultimate aim of such a technological revol ...

EPFL2023

Influence of the molecular weight and physical properties of a thermoplastic polymer on its dynamic wetting behavior

Valentin Rougier

The wetting dynamics of molten thermoplastic polymers, which are known to influence the force balance of the triple line, are not understood properly despite their importance in many industrial processes. In particular, the influence of the molecular weigh ...

Elsevier2023

Acetal-Stabilized Carbohydrates as Novel Platform Molecules for Renewable Polymer Production

Lorenz Perry Manker

To address the rising demand for plastics, it is essential to create new types of polymers that are both highly recyclable and emit minimal amounts of greenhouse gases. These plastics should be derived from readily available, renewable feedstocks. Such eff ...

EPFL2023

Method for manufacturing an active structure for a radiation detector and polymeric mold for the method

Arnaud Bertsch, Fabrizio Carbone, Alessandro Mapelli, Veronica Leccese, Michele Caldara

A method for manufacturing a scintillation detector structure including the steps of forming a plurality of first structures into a surface of a substrate to form a patterned substrate, filling the plurality of first structures and covering the surface of ...

2023

Lignin, from biomass waste to sustainable materials for food packaging, antiviral coatings and agriculture

Alice Boarino

Our planet has been challenged for years by our reckless use of fossil fuels, which has led to the ongoing climate change and energy crisis. The transition to the use of renewable alternative sources has now became urgent and inevitable. The valorization o ...

EPFL2023