Enhanced precipitate growth at reduced temperatures during chemical ordering in deformed red gold alloys

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

The evolution of microstructure and mechanical properties of AISI 904L stainless steel subjected to high-pressure torsion (HPT) and post-deformation annealing was investigated. A nanocrystalline microstructure with an average grain size of 48 nm was obtain ...

Manipulating the size and orientation of quantum materials is often used to tune emergent phenomena, but precise control of these parameters is also necessary from an experimental point of view. Various synthesis techniques already exist, such as epitaxial ...

In geological reservoirs, pore fluid chemistry can affect rock strength by inducing mineral dissolution, precipitation, and alteration, among other processes. Increasing pressure and temperature can shift deformation from localized to ductile, decreasing p ...

Multi-frequency and Doppler spectral radars are valuable tools for retrieving information on the microphysics of precipitation, particularly snowfall. However, estimating microphysical properties from radar measurements is an ill-posed problem, i.e., diffe ...

The versatility and flexibility in laser-based layer-wise additive manufacturing processes allow for the fabrication of metallic parts with tailorable mechanical properties. Interest in microstructure control during the process has led to varying applicati ...

To explore the governing mechanism underlying the tensile fatigue behavior of Ultra-high Performance Fiber Reinforced Cementitious Composites (UHPFRC), this study tested eight specimens using four advanced non-destructive measurement techniques. First, mag ...

The landscape of production technologies for three-dimensional structures is experiencing a significant transformation, driven by advancements in computer-controlled layer-wise material deposition techniques, commonly known as additive manufacturing (AM) o ...

Low-dimensional materials exhibiting stable magnetic ordering are interesting from a fundamental point of view as well as for future application in information technologies. Metalorganic magnets, created by linking metal atoms with specific organic molecul ...

WC-Co cemented carbides are widely used in the cutting tool industry due to their mechanical properties. These composite materials indeed combines hardness and toughness, two properties that are generally contradictory. WC-Co is composed of hard WC grains ...

The influence of various heat treatments on the corrosion behavior of a novel iron-based shape memory alloy (Fe-SMA), Fe-17Mn-6Si-10Cr-4Ni-1(V,C), used as prestressing elements in civil engineering was examined through electrochemical corrosion methods. SM ...

Fractures are diverse geological features. Despite extensive research on their varied geometries and growth mechanisms, there has been relatively little focus on how acid-rock interactions, such as reactive transport and precipitation, influence crack grow ...

Kirigami, the ancient technique of paper cutting, has been successfully applied to enhance the stretchability and ductility of nanoscale graphene. However, existing experimentally realized graphene kirigami (GK) are created by introducing parallel cuts, ex ...

Titanium has become in recent years an interesting material in many applications that require a combination of high mechanical properties and low density. It has the peculiarity of undergoing an allotropic transformation at 882°C. Below this temperature, ...

Fatigue damage in materials results in localized strain at the microstructural level. In many engineering components of the cooling circuits of nuclear power plants, where austenitic steels are used, the material experiences multiaxial cyclic loading, eith ...

Three-dimensional topological semimetals have emerged as strong candidates to probe new fundamental physical phenomena that could be exploited to develop next generation electronics. However, many aspects of their electronic properties remain unclear. Thi ...

The strength of the interface between iron (Fe) and individual spherical silica (SiO2) inclusions of 5 +/- 1 mu m diameter is measured by means of in-situ micro-cantilever bending tests conducted under displacement control within a scanning electron micros ...

Laser powder bed fusion (LPBF) is a powder-based additive manufacturing (AM) technique, which shows great potential in the production of complex-shaped parts with unprecedented design freedom. In addition, it allows for an active manipulation of the micros ...

Porous rocks have long been the focus of intense research driven by their importance in our society as host to our most essential resources (oil, gas, water, geothermal energy, etc), yet their rheology remains poorly understood. With increasing depth, poro ...

Metal plasticity is an inherently multiscale phenomenon due to the complex long-range field of atomistic dislocations that are the primary mechanism for plastic deformation in metals. Atomistic/Continuum (A/C) coupling methods are computationally efficient ...

Application of a single metal or alloy is often restricted by its properties from optimal combination of performance and cost. Therefore, there is a vast need of joining dissimilar metals for various applications in biomedical, aerospace, automobile and ma ...

Enhanced precipitate growth at reduced temperatures during chemical ordering in deformed red gold alloys

Chat with Graph Search

Achieving strength-ductility synergy in AISI 904L superaustenitic alloy through severe plastic deformation and post-deformation annealing

Structural and magnetic properties of β-Li2IrO3 after grazing-angle focused ion beam thinning

Fluid Chemistry Effect on Localized and Ductile Deformation of a Porous Sandstone

What can radars tell us about snowfall microphysics? Insights from a Markov chain Monte-Carlo approach

In-situ neutron diffraction revealing microstructure changes during laser powder bed fusion and in-situ laser heat treatments of 316L and 316L-Al1

Deciphering tensile fatigue behavior of UHPFRC using magnetoscopy, DIC and acoustic emission

An in-situ/operando laser powder bed fusion system for advanced neutron characterization

2D Metalorganic Ferromagnets

Optimization and Functionalization of the TiAlN/WC-Co Interface for cutting tools

Corrosion Behavior of Heat-Treated Fe-Based Shape Memory Alloys

Time-Dependent Deformation of Sandstone due to Chemical Corrosion: An Investigation Using the Heterogeneous Grain-Based Phase-Field Method

Deformation response of highly stretchable and ductile graphene kirigami under uniaxial and biaxial tension

Microstructure et usinabilité d'alliages de titane béta-métastable

Microscopic Digital Image Correlation Analysis of Strain Distributions in Stainless Steel 316L Induced by Multiaxial Cyclic Loading

Strain Gradients and Magnetoresistance in Microstructured 3D Topological Semi-metals

Room-temperature strength of the interfacial bond between silica inclusions and iron

Laser powder bed fusion of Fe-based shape memory alloys for novel structural metamaterials and "smart" structures

Bounding the localized to ductile transition in porous rocks: implications for geo-reservoirs

Lattice Green's function method for Atomistic/Continuum coupling

Control of intermetallics in the interface in directed energy deposition of titanium on stainless steel 316L