Publications related to Models implemented in the methodological approach to design the initial STEP first wall contour

Related publications (34)

A Spatiotemporal analysis of photovoltaic electricity storage potential in electric vehicles

Christophe Ballif, Nicolas Würsch, Alejandro Pena Bello, Noémie Alice Yvonne Ségolène Jeannin, Jérémy Dumoulin

Decarbonizing mobility and integrating more renewable sources in electricity production are necessary levers to meet the climate targets. Coupling electric vehicle (EV) charging with photovoltaic (PV) electricity generation could help to provide clean elec ...

Aalborg University2025

Hydrokinetic energy applications within hydropower tailrace channels: Implications, siting, and U.S. potential

Mirko Musa

Hydropower tailrace channels are unique and attractive locations for hydrokinetic energy harvesting due to fast currents, scheduled flow releases, proximity to existing structural and electrical infrastructures, and low risk of additional environmental imp ...

Pergamon-Elsevier Science Ltd2025

Partial Assistance with Lower-Limb Exoskeletons to Enhance Gait and Balance in Daily Living Activities

Zeynep Ozge Orhan

This thesis addresses key challenges in developing adaptive lower-limb exoskeletons to enhance balance, mobility, and user autonomy during daily living activities. It presents a comprehensive exploration of three critical aspects: push recovery during stan ...

EPFL2025

Scenario optimization for the tokamak ramp-down phase in RAPTOR: A. Analysis and model validation on ASDEX Upgrade

Olivier Sauter, Federico Alberto Alfredo Felici, Anna Teplukhina, Simon Van Mulders, Cassandre Ekta Contré

We discuss how the combination of experimental observations and rapid modeling has enabled to improve understanding of the tokamak ramp-down phase in ASDEX Upgrade. A series of dedicated experiments has been performed, to disentangle the effect of individu ...

Iop Publishing Ltd2024

Overview of fast particle experiments in the first MAST Upgrade experimental campaigns

Matteo Vallar

MAST-U is equipped with on-axis and off-axis neutral beam injectors (NBI), and these external sources of super-Alfv & eacute;nic deuterium fast-ions provide opportunities for studying a wide range of phenomena relevant to the physics of alpha-particles in ...

IOP Publishing Ltd2024

Nonlinear simulation of plasma turbulence using a gyrokinetic moment-based approach

Antoine Cyril David Hoffmann

Plasma turbulence plays a fundamental role in determining the performances of magnetic confinement fusion devices, such as tokamaks. Advances in computer science, combined with the development of efficient physical models, have significantly improved our u ...

EPFL2024

Experimental study and interpretative modelling of the Power Exhaust in Configurations with Multiple X-Points in TCV

Sophie Danielle Angelica Gorno

Nuclear fusion presents a promising clean energy source to mitigate future energy crises, with magnetic confinement fusion well-positioned to provide a baseload scenario to power future reactors. The unmitigated power exhaust of such reactors threatens its ...

EPFL2024

Global fluid simulations of plasma turbulence in stellarators

António João Caeiro Heitor Coelho

In order to cope with the decarbonization challenge faced by many countries, fusion is one of the few alternatives to fossil fuels for the production of electricity. Two devices invented in the middle of the previous century have emerged as the most promis ...

EPFL2024

Scenario optimization for the tokamak ramp-down phase in RAPTOR. Part B: safe termination of DEMO plasmas

Olivier Sauter, Federico Alberto Alfredo Felici, Emiliano Fable, Anna Teplukhina, Simon Van Mulders, Cassandre Ekta Contré

An optimized plasma current ramp-down strategy is critical for safe and fast termination of plasma discharges in a tokamak demonstration fusion reactor (DEMO), both in planned and emergency scenarios, avoiding plasma disruptions and excessive heat loads to ...

Iop Publishing Ltd2024

Disruption avoidance and investigation of the H-Mode density limit in ASDEX Upgrade

Federico Alberto Alfredo Felici, Alessandro Pau

In recent years a strong effort has been made to investigate disruption avoidance schemes in order to aid the development of integrated operational scenarios for ITER. Within the EUROfusion programme the disruptive H-mode density limit (HDL) has been studi ...

Iop Publishing Ltd2024

Long plasma duration operation analyses with an international multi-machine (tokamaks and stellarators) database

Stefano Coda, Jeffrey Huang

Combined high-fusion performance and long-pulse operation is one of the key integration challenges for fusion energy development in magnetic devices. Addressing these challenges requires an integrated vision of physics and engineering aspects with the purp ...

IOP Publishing Ltd2024

Re-design of EU DEMO with a low aspect ratio

Xabier Sarasola Martin

The design point that had been chosen for EU DEMO in 2016 is reviewed here and a modification is proposed with a lower aspect ratio. Previously the same aspect ratio, A, was chosen for EU DEMO as in major tokamak experiments including ITER (A = 3.1), and, ...

Elsevier2024

Maintenance and optimization of the TCV power supply

Damien Fasel, Ugo Siravo, Jérémie Dubray

The TCV tokamak is powered by a flywheel generator to supply the magnetic coils and the auxiliary heating systems. The generator has just undergone its fourth major overhaul to make it ready for the next ten years, after more than thirty years of almost tr ...

Elsevier Science Sa2024

The magnet feeders for the European DEMO fusion reactor: Conceptual design and recent advances

Rainer Wesche, Roberto Guarino

The magnet feeders are part of the critical systems of a fusion reactor since they represent the interface between the in-cryostat components at 4.5 K and the room-temperature cryogenic plant and power supply. The European DEMO tokamak foresees 16 toroidal ...

2024

Divertor turbulence characterisation using Gas Puff Imaging in the TCV tokamak

Curdin Tobias Wüthrich

The performance of magnetic confinement fusion devices, such as tokamaks, is strongly correlated to the phenomena that occur in the boundary region of the plasma core that faces the wall of the device. The dominant cross-field transport mechanisms from the ...

EPFL2024

Tangentially viewing phase contrast imaging for turbulence measurements in toroidal fusion devices

Stefano Coda

Phase contrast imaging (PCI) is an established and powerful technique for measuring density fluctuations in plasmas and has been successfully applied to several fusion devices. Rooted in a concept first developed for microscopy, PCI belongs to the category ...

2024

Performance of energy piles foundation in hot-dominated climate: A case study in Dubai

Lyesse Laloui, Elena Ravera, Sofie Elaine ten Bosch

Energy piles represent an innovative technology that can help provide sustainable geothermal heating or cooling energy for thermal conditioning purposes. In hot-dominated climates, the interest is to inject heat in the ground and extract energy for space-c ...

Pergamon-Elsevier Science Ltd2024

Teaching Not To

Charlotte Malterre-Barthes

Two design studios were successively taught in two schools of architecture: one at the Harvard Graduate School of Design (GSD) and the other at the Swiss Federal Institute of Technology in Lausanne (EPFL) in Lausanne, Switzerland, based on "A Global Morato ...

Taylor & Francis Inc2024

An explorative method to support design decisions based on carbon constraints and daylight sufficiency needs

Nazanin Rezaei Oghazi

The global construction industry contributes to 37% of carbon emissions associated to both building operations and construction. To help achieve the net-zero targets set by 2050, it is mandated to achieve a 50% reduction in carbon emissions by 2030. As we ...

EPFL2024

Shaped Laser Pulses for Microsecond Time-Resolved Cryo-EM: Outrunning Crystallization during Flash Melting

Marcel Drabbels, Ulrich Lorenz, Constantin Richard Krüger, Nathan Junior Mowry

Water vitrifies if cooled at rates above 3 × 105 K/s. In contrast, when the resulting amorphous ice is flash heated, crystallization occurs even at a more than 10 times higher heating rate, as we have recently shown. This may present an issue for microseco ...

2024