Publications related to Fundamentals of perovskite formation for photovoltaics

Related publications (39)

Enhancing lifetime, forecasting, and economic benefits of photovoltaic technologies undergoing UV-induced degradation with optical filtering

Christophe Ballif, Antonin Faes, Marion Solange Madeleine Dussouillez, Christian Michael Wolff

Ultraviolet-induced degradation (UV-ID) of various PV cell types was analyzed under optical UV filters with different cutoff wavelengths. Cell types studied included interdigitated back contact (IBC), passivated emitter and rear totally diffused (PERT), an ...

2025

Unraveling the Role of Electron-Withdrawing Molecules for Highly Efficient and Stable Perovskite Photovoltaics

Michael Graetzel, Shaik Mohammed Zakeeruddin, Mingyang Wei, Likai Zheng

Electron-withdrawing molecules (EWMs) have exhibited remarkable efficacy in boosting the performance of perovskite solar cells (PSCs). However, the underneath mechanisms governing their positive attributes remain inadequately understood. Herein, we conduct ...

Wiley-VCH Verlag GmbH2025

Visualising ionic screening in perovskite solar cells: a bumpy ride along the J–V curve

Frank Nüesch

The J–V bump and hysteresis in perovskite solar cells are studied combining measurement and simulation, linking them to spatial collection efficiency changes from ionic charge accumulation, as visualised in external quantum efficiency (EQE) spectra. ...

Royal Society of Chemistry (RSC)2025

All-perovskite tandem solar cells achieving >29% efficiency with improved (100) orientation in wide-bandgap perovskites

Michael Graetzel, Shaik Mohammed Zakeeruddin, Ursula Röthlisberger, Nikolaos Lempesis, Mingyang Wei, Virginia Carnevali, Lorenzo Agosta, Vladislav Slama

Monolithic all-perovskite tandem solar cells present a promising approach for exceeding the efficiency limit of single-junction solar cells. However, the substantial open-circuit voltage loss in the wide-bandgap perovskite subcell hinders further improveme ...

NATURE PORTFOLIO2025

Facile and Low-Cost Design Alternative of Spiro-OMeTAD as p-Type Semiconductor for Efficient Perovskite Solar Cells

Mohammad Khaja Nazeeruddin

A simple diphenylamine-based hole transporting material V1553 was synthesized and incorporated into a perovskite solar cell, which showed remarkable power conversion efficiency close to 23%. The investigated HTM was synthesized via one-step catalyst-free c ...

WILEY-V C H VERLAG GMBH2025

Buried SnI2 Induces Gradient Heterojunctions in Sn–Pb Perovskite Solar Cells

Chenxu Zhao

Tin–lead (Sn–Pb) mixed perovskite solar cells (PSCs) offer the potential for higher power conversion efficiency (PCE) than their pure lead counterparts. However, the lack of a well-defined Sn/Pb compositional profile results in disordered internal electric ...

American Chemical Society (ACS)2025

Tracking deep-level defects in degrading perovskite solar cells with a multifactorial approach

Vivek Subramanian

In this work, we provide a mechanistic understanding of the degradation of perovskite solar cells in operation by focusing on methylammonium lead triiodide (CH3NH3PbI3 or MAPbI3) and tracking the evolution of electronic defects via photo-induced current tr ...

Elsevier2024

High-quality epitaxial BaTiO3 films grown by high-vacuum chemical vapor deposition for integrated electro-optical devices

Patrik Willi Hoffmann, Wojciech Bozydar Szmyt

Synthesizing high-quality epitaxial BaTiO3 (BTO) by means of high-vacuum chemical vapor deposition (HV-CVD) requires a precise control over precursor fluxes impinging onto the heated substrate surface so that the incorporation rates of all elements corresp ...

2025

Supramolecular interactions using β-cyclodextrin in controlling perovskite solar cell performance

Jun Ho Yum, Kevin Sivula, Jiyoun Seo, Parnian Ferdowsi

In the context of perovskite solar cells (PSCs), enhancing device performance often involves adding a small excess of lead iodide (PbI2) to the precursor solution. However, the presence of unreacted PbI2 can lead to accelerated degradation compromising lon ...

Royal Society of Chemistry2024

Machine-learning-empowered FDTD/FEM simulations for predictive solar energy absorption in plasmonic metamaterial nanocavity arrays

Amir Jafargholi

FDTD/FEM simulations, strengthened by machine learning, achieve 95.44% optical absorption efficiency in TiO 2 /TiN plasmonic nanocavities for solar energy harvesting. ...

Royal Society of Chemistry (RSC)2025

Computational Studies on the Stability of Organic-Inorganic Hybrid Halide Lead Perovskites

Mathias Dankl

Perovskite-based solar cells are currently the most rapidly advancing photovoltaic technology but concerns about their long-term stability are still impeding full-scale commercialization. This thesis provides computational insights into some of the stabili ...

EPFL2024

A Spatiotemporal analysis of photovoltaic electricity storage potential in electric vehicles

Christophe Ballif, Nicolas Würsch, Alejandro Pena Bello, Noémie Alice Yvonne Ségolène Jeannin, Jérémy Dumoulin

Decarbonizing mobility and integrating more renewable sources in electricity production are necessary levers to meet the climate targets. Coupling electric vehicle (EV) charging with photovoltaic (PV) electricity generation could help to provide clean elec ...

Aalborg University2025

A thermotropic liquid crystal enables efficient and stable perovskite solar modules

Mohammad Khaja Nazeeruddin, Bin Ding, Yong Ding

Perovskite solar cells have seen impressive progress in performance and stability, yet maintaining efficiency while scaling area remains a challenge. Here we find that additives commonly used to passivate large-area perovskite films often co-precipitate du ...

Nature Portfolio2024

Hybrid Ag-mesh/Ta-doped TiO2 thin film configuration as a visible and near-infrared transparent electrode

Andreas Schueler, Jérémy Jacques Antonin Fleury, Krishna Manwani

This study focuses on the fabrication of a hybrid Ag-mesh/Ta-doped TiO2 (TTO) electrode that has a low sheet resistance and high transparency in the visible and near-infrared region, thereby holding significant commercialization potential. Here, ∼82 nm thi ...

2025

Self-dispatching a renewable energy community by means of battery energy storage systems

Mario Paolone, Francesco Gerini, Matthieu Benoit C. Jacobs

Renewable energy communities, where citizens, businesses, and institutions produce, consume, store, and share energy, are increasingly pivotal in energy markets. The use of shared community batteries introduces the challenge of adapting control strategies ...

2025

From PV to EV: Mapping the Potential for Electric Vehicle Charging with Solar Energy in Europe

Christophe Ballif, Nicolas Würsch, Alejandro Pena Bello, Noémie Alice Yvonne Ségolène Jeannin, Jérémy Dumoulin

The electrification of the transport sector is a key element in decarbonizing our societies. However, energy systems will have to cope with additional electricity demand due to the charging needs of electric vehicles (EVs) together with the integration of ...

2024

Aryl-Acetylene Layered Hybrid Perovskites in Photovoltaics

Christophe Ballif, Aïcha Hessler-Wyser, Michael Graetzel, Ursula Röthlisberger, Mostafa Rabie Shlaly Bahr Othman, Masaud Hassan S Almalki, Fatemeh Ansari, Felix Thomas Eickemeyer, Ghewa Alsabeh, Lukas Pfeifer, Christian Michael Wolff, Nikolaos Lempesis, Virginia Carnevali, Vladislav Slama, Andrea Vezzosi

Metal halide perovskites have shown exceptional potential in converting solar energy to electric power in photovoltaics, yet their application is hampered by limited operational stability. This stimulated the development of hybrid layered (two-dimensional, ...

WILEY-V C H VERLAG GMBH2025

Investigating Non-equilibrium Physics in Wide Bandgap Semiconductors and Quantum Materials via Ultrafast Spectroscopy

Hui-Yuan Chen

This thesis uses femtosecond laser spectroscopy in studying strong correlation in condensed matters that are pertinent to future technology: a wide bandgap perovskite and a quantum material, with the employment of ultrafast time-resolved spectroscopy in th ...

EPFL2024

Advanced Manufacturing and Characterization of Building-Integrated Photovoltaic Modules

Alejandro Borja Block

Photovoltaic (PV) technology is necessary for global decarbonization. However, one of the challenges of the technology is that its land use may conflict with other space demands. Building-integrated photovoltaic (BIPV) is a solution to efficiently use the ...

EPFL2024

Spiro-Phenothiazine Hole-Transporting Materials: Unlocking Stability and Scalability in Perovskite Solar Cells

Michael Graetzel, Shaik Mohammed Zakeeruddin, Jaeki Jeong, Likai Zheng

Improving both the efficiency and long-term stability of perovskite solar cells (PSCs) is critical for their commercial deployment. Despite the widespread use of spiro-OMeTAD as a hole-transporting material (HTM), its inhomogeneous doping behavior and susc ...

2025