Publications related to Materials for Fusion Reactors

Related publications (31)

Design and implementation of a model-based hierarchical architecture for plasma shape control in the TCV tokamak

Olivier Sauter, Stefano Coda, Federico Alberto Alfredo Felici, Antoine Pierre Emmanuel Alexis Merle, Cristian Galperti, Alessandro Tenaglia, Adriano Mele

Plasma shape control is a fundamental tool for effective tokamak operation, allowing improved plasma performance and the pursuit of challenging scientific objectives. In this framework, the Tokamak á Configuration Variable (TCV) of the École Polytechnique ...

IOP Publishing2025

Investigating the influence of divertor baffles on nitrogen-seeded detachment in TCV with SOLPS-ITER simulations and TCV experiments

Basil Duval, Holger Reimerdes, Christian Gabriel Theiler, Olivier Claude Martin Février, Richard Alexander David Ducker, Sophie Danielle Angelica Gorno, Claudia Colandrea, Guang-Yu Sun, Luke Simons, Elena Tonello, Massimo Carpita

Plasma edge simulations with the SOLPS-ITER code are performed to study the influence of divertor baffles on nitrogen-seeded detachment in Tokamak & agrave; Configuration Variable (TCV) single-null, L-mode discharges. Scans of nitrogen seeding rate are con ...

IOP Publishing Ltd2025

Machine learning methods for locked-mode predictions in MAST-U plasmas

Alessandro Pau

In tokamaks, rotating magneto-hydro-dynamic modes frequently decelerate as their amplitude increases. Once a critical threshold in amplitude is reached, these modes stop rotating into a specific toroidal and poloidal position and are commonly named Locked ...

IOP Publishing Ltd2025

Access to an ELM-suppressed X-point radiator regime in TCV snowflake minus configurations

Basil Duval, Holger Reimerdes, Christian Gabriel Theiler, Curdin Tobias Wüthrich, Olivier Claude Martin Février, Daniele Hamm, Sophie Danielle Angelica Gorno, Yinghan Wang, Guang-Yu Sun, Luke Simons, Ming Yin Kenneth Lee, Artur Perek, Martim Zurita

TCV’s operating regime with an X-point radiator (XPR) has been broadened by changing the magnetic geometry. XPRs have properties that could make them an attractive power exhaust solution for fusion reactors. These include the conversion of a high fraction ...

Elsevier2024

EUROfusion contributions to ITER nuclear operation

Alessandro Pau

ITER is of key importance in the European fusion roadmap as it aims to prove the scientific and technological feasibility of fusion as a future energy source. The EUROfusion consortium of labs within Europe is contributing to the preparation of ITER scient ...

IOP Publishing Ltd2024

Bending Tolerance of React&Wind Nb3Sn Conductors for Fusion Magnets

Pierluigi Bruzzone, Kamil Sedlák, Xabier Sarasola Martin, Chiara Frittitta, Federica Demattè, Hugues Marie Alain Bajas

The react-and-wind technique for manufacturing of large Nb3Sn fusion magnets (RW) is very attractive because of the superior performance of the Nb3Sn with lower thermal strain compared to the wind-and-react technique. The procedure for magnet winding is al ...

IEEE Institute of Electrical and Electronics Engineers2024

Progress in the development of the ITER baseline scenario in TCV

Olivier Sauter, Stefano Coda, Alexander Karpushov, Yann Camenen, Benoît Labit, Antoine Pierre Emmanuel Alexis Merle, Olivier Claude Martin Février, Simon Van Mulders, Filippo Bagnato, Alessandro Pau, Matteo Vallar, Cassandre Ekta Contré, Stefano Marchioni, Oleg Krutkin, Reinart Andreas J. Coosemans

Under the auspices of EUROfusion, the ITER baseline (IBL) scenario has been jointly investigated on AUG and TCV in the past years and this paper reports on the developments on TCV. It is found that the performance of TCV IBL is mainly limited by (neoclassi ...

2024

Improving the photoelectrocatalytic efficiency of CuWO4 through molybdenum for tungsten substitution and coupling with BiVO4

Kevin Sivula

A systematic investigation on the photoelectrocatalytic (PEC) performance of a series of CuW1-xMoxO4 materials with different Mo for W substitution (x = 0-0.8), successfully synthesized as single, transparent photoactive layers, allowed us to identify copp ...

Royal Soc Chemistry2024

Demonstration of a sparse sensor placement technique to the limited diagnostic set in a fusion power plant

Lorenzo Martinelli, Artur Perek

DEMO will have a limited diagnostic set for optimization of reactor performance, and limited diagnostic coverage due to challenging reactor conditions. This poses challenges for control, especially for detachment control which is planned to be performed wi ...

Elsevier Science Sa2024

Full-discharge simulation and optimization with the RAPTOR code, from present tokamaks to ITER and DEMO

Simon Van Mulders

Tokamak devices aim to magnetically confine a hydrogen plasma at sufficiently high pressure to achieve net energy production from nuclear fusion of light isotopes. Predictive modeling and optimization is crucial for reliable operation of tokamak reactors, ...

EPFL2023

Toroidal Alfven eigenmodes observed in low power JET deuterium-tritium plasmas

Paulo Giovane Paschoali Pereira Puglia

The Joint European Torus recently carried out an experimental campaign using a plasma consisting of both deuterium (D) and tritium (T). We observed a high-frequency mode using a reflectometer and an interferometer in a D-T plasma heated with low power neut ...

IOP Publishing Ltd2023

Vertical electron cyclotron emission diagnostic on the tokamak à configuration variable

Ambrogio Fasoli, Stefano Coda, Laurie Porte

In this paper, a diagnostic for the measurement of the electron cyclotron emission (ECE) from non-thermal electrons in magnetically confined fusion plasmas is presented. The diagnostic employs a vertical viewing line of sight that allows us to directly inf ...

2023

Design and Development of a Diagnostic System for a Non-Intercepting Direct Measure of the SPIDER Ion Source Beamlet Current

Basile Marie Jacques Pouradier Duteil

Stable and uniform beams with low divergence are required in particle accelerators; therefore, beyond the accelerated current, measuring the beam current spatial uniformity and stability over time is necessary to assess the beam performance, since these pa ...

MDPI2023

Atomic-level structure determination of amorphous molecular solids by NMR

Manuel Cordova, Arthur César Pinon, David Lyndon Emsley, Pinelopi Moutzouri

Structure determination of amorphous materials remains challenging, owing to the disorder inherent to these materials. Nuclear magnetic resonance (NMR) powder crystallography is a powerful method to determine the structure of molecular solids, but disorder ...

Nature Portfolio2023

Tests and Qualification of the European 1 MW, 170 GHz CW Gyrotron in an ITER relevant configuration at SPC

Stefano Alberti, Timothy Goodman, Jean-Philippe Hogge, Francisco Sanchez, Jérémy Genoud

After an initial testing period at the Karlsruhe Institute of Technology, the upgraded EU 1 MW, 170 GHz continuous wave (CW) industrial prototype gyrotron (TH1509U) for Electron Cyclotron Resonance Heating and Current Drive (ECRH&CD) in ITER has been trans ...

IEEE2022

Enhanced confinement in diverted negative-triangularity L-mode plasmas in TCV

Olivier Sauter, Stefano Coda, Laurie Porte, Benoît Labit, Alessandro Marinoni, Antoine Pierre Emmanuel Alexis Merle, Cedric Kar-Wai Tsui, Umar Sheikh, Filippo Bagnato, Alessandro Pau, Matteo Vallar

The favorable confinement properties of negative-triangularity (NT) tokamak configurations were discovered in the TCV tokamak in the late 1990s and were documented over the two following decades, through investigations of predominantly electron-heated plas ...

2022

A self-consistent multi-component model of plasma turbulence and kinetic neutral dynamics for the simulation of the tokamak boundary

Paolo Ricci

A self-consistent model is presented for the simulation of a multi-component plasma in the tokamak boundary. A deuterium plasma is considered, with the plasma species that include electrons, deuterium atomic ions and deuterium molecular ions, while the deu ...

IOP Publishing Ltd2022

The power threshold of H-mode access in mixed hydrogen-tritium and pure tritium plasmas at JET with ITER-like wall

Henri Weisen

The heating power to access the high confinement mode (H-mode), P (LH), scales approximately inversely with the isotope mass of the main ion plasma species as found in (protonic) hydrogen, deuterium and tritium plasmas in many fusion facilities over the la ...

IOP Publishing Ltd2022

Electromechanical investigations and quench experiments on sub-size HTS cables for high field EU-DEMO Central Solenoid

Ortensia Dicuonzo

The aim of this thesis is to investigate the mechanical and thermal behaviour of HTS coated conductor cables for EUROfusion DEMO magnets. One of the issue in large HTS magnets is the safety against a quench. A quench is a sudden thermal runway in which the ...

EPFL2022

Development of metal-organic frameworks based on N-heterocyclic ligands

Ilia Kochetygov

Metal-organic frameworks (MOFs) have firmly established in the field of porous materials since their early discovery in the 1990s. With a plethora of applications, these materials offer endless possibilities owing to their tunable, modular nature. The vast ...

EPFL2022