Uniaxial Cyclic and Tensile Tests on Structural Metallic Materials

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

To explore the governing mechanism underlying the tensile fatigue behavior of Ultra-high Performance Fiber Reinforced Cementitious Composites (UHPFRC), this study tested eight specimens using four advanced non-destructive measurement techniques. First, mag ...

In geological reservoirs, pore fluid chemistry can affect rock strength by inducing mineral dissolution, precipitation, and alteration, among other processes. Increasing pressure and temperature can shift deformation from localized to ductile, decreasing p ...

Skin-like bioelectronics offer a transformative technological frontier, catering to continuous and real-time yet highly imperceptible and socially discreet digital healthcare. The key technological breakthrough enabling these innovations stems from advance ...

The seismic damage of masonry walls is reflected in cracks that tend to start at the head and bed joints and subsequently propagates through the masonry units. In this regard, the horizontal-to-vertical compressive strength ratio of bricks might have the a ...

The evolution of microstructure and mechanical properties of AISI 904L stainless steel subjected to high-pressure torsion (HPT) and post-deformation annealing was investigated. A nanocrystalline microstructure with an average grain size of 48 nm was obtain ...

WC-Co cemented carbides are widely used in the cutting tool industry due to their mechanical properties. These composite materials indeed combines hardness and toughness, two properties that are generally contradictory. WC-Co is composed of hard WC grains ...

Fractures are diverse geological features. Despite extensive research on their varied geometries and growth mechanisms, there has been relatively little focus on how acid-rock interactions, such as reactive transport and precipitation, influence crack grow ...

This study employs a Cohesive Zone Model to quantitatively evaluate the evolution of interfacial fracture parameters across various interface architectures. Employing the Material Extrusion (ME) type 3D printing method, sutural interfaces characterized by ...

A framework to engineer existing structures, in particular bridges, and novel engineering methods and technologies are presented to extend the service duration of existing bridges while meeting the requirements of modern use. Accurate determination of brid ...

We study continuous-domain linear inverse problems that involve a general data-fidelity term and a regularisation term. We consider a regularisation that is formed by the sparsity-promoting total-variation norm, pre-composed with a differential operator th ...

The influence of various heat treatments on the corrosion behavior of a novel iron-based shape memory alloy (Fe-SMA), Fe-17Mn-6Si-10Cr-4Ni-1(V,C), used as prestressing elements in civil engineering was examined through electrochemical corrosion methods. SM ...

Titanium-based Metal Matrix Composites (MMCs) manufactured by additive manufacturing offer tremendous lightweighting opportunities. However, processing the high reinforcement contents needed to substantially improve elastic modulus while conserving signifi ...

Wind turbine rotor blades are usually fabricated using composite materials and epoxy adhesive to bond the elements together. Due to their large size, the thickness of the adhesive layer varies from 1 to up to 30 mm depending on the position. The failure of ...

Reinforced concrete flat slabs consist of a continuous, thin concrete plate that rests on a grid of columns. The supporting surface of the columns is very small compared to the floor plan dimensions, leading to concentrations of shear forces near the colum ...

Under service conditions, R-UHPFRC (Reinforced Ultra High Performance Fiber Reinforced Cementitious composite) beams exhibit residual deflection after loading-unloading. This is due to the tensile strain hardening behavior of UHPFRC. The precise calculatio ...

Reinforced concrete walls provide effective bracing against seismic lateral loading for buildings worldwide. In Latin America, seismic design provisions commonly adhere to the ACI 318 building code, which is predominantly based on United States constructio ...

The tensile deformation of top-down cracks significantly influences pavement delamination. Accurately formulating the stress intensity factor (SIF) is crucial for assessing the stress/strain near crack tips. In the present study, a robust data mining metho ...

Flow of lava, avalanches, mudslides, and many geophysical and planetary flow systems are examples of free-surface flows of Yield Stress Fluids (YSFs). This category of fluids is known for its dual behavior below- and above a yielding threshold for the appl ...

Today, two-way shape memory alloys have become increasingly popular in various industries. In this study, innovative nitinol-based bi-layers were fabricated using the additive approach. The purpose of the study was to examine the characteristics of a bi-la ...

In typical reinforced concrete design, reinforcement is designed to carry axial forces, but it can also resist transversal forces by dowel action. This is usually neglected for simplicity's sake in the design phase, but it can be accounted for either expli ...

Uniaxial Cyclic and Tensile Tests on Structural Metallic Materials

Chat with Graph Search

Deciphering tensile fatigue behavior of UHPFRC using magnetoscopy, DIC and acoustic emission

Fluid Chemistry Effect on Localized and Ductile Deformation of a Porous Sandstone

Highly Self-Adhesive and Biodegradable Silk Bioelectronics for All-In-One Imperceptible Long-Term Electrophysiological Biosignals Monitoring

Influence of the Horizontal-to-Vertical Compressive Strength of Hollow Clay Bricks on the In-Plane Drift Capacity of Unreinforced Masonry Walls

Achieving strength-ductility synergy in AISI 904L superaustenitic alloy through severe plastic deformation and post-deformation annealing

Optimization and Functionalization of the TiAlN/WC-Co Interface for cutting tools

Time-Dependent Deformation of Sandstone due to Chemical Corrosion: An Investigation Using the Heterogeneous Grain-Based Phase-Field Method

QUANTIFICATION OF COHESIVE PROPERTIES IN BIOINSPIRED INTERFACES OF 3D-PRINTED HETEROGENEOUS MATERIALS

Framework to engineer existing bridges for sustainability, validated by applications

Convergence analysis of the discretization of continuous-domain inverse problems

Corrosion Behavior of Heat-Treated Fe-Based Shape Memory Alloys

Tensile Properties of Ex-Situ Ti-TiC Metal Matrix Composites Manufactured by Laser Powder Bed Fusion

Improved Material Formulations for Thick Adhesive Joints in Wind Turbine Blades

Shear and steel-fibre reinforcement for the punching resistance of flat slabs at internal and edge columns

Experimental and Analytical Investigation of Deflection of R-UHPFRC Beams Subjected to Loading-Unloading

Experimental and numerical evaluation of a U-shaped thin lightly reinforced concrete wall tested under cyclic loading

Formulation of stress intensity factor under pure bending condition in multilayer pavements using numerical study and model tree approach

Refractive Index Matched (RIM) PIV in Free Surface Flows of Particle-Laden Yield Stress Fluids

Microstructure and shape memory behavior of a bi-layer fabricated by NiTi deposition on NiTiCu substrate using laser powder bed fusion

Experimental investigation of dowel action in reinforcing bars using refined measurements