Publications related to A pre-fatigue training strategy to stabilize LiCoO2 at high voltage

Related publications (35)

BattINFO Converter: An Automated Tool for Semantic Annotation of Battery Cell Metadata

Driven by the global demand for batteries with improved performance, cost efficiency, and sustainability, battery research has expanded rapidly during recent years, generating a surge in data which offers the potential to accelerate the discovery of new ba ...

Wiley2025

Efficient modeling of parallel counterpoise wires using an FDTD-based transmission line approach

Farhad Rachidi-Haeri

This paper presents an efficient modeling approach for parallel counterpoise wires used in the tower-footing grounding systems of high-voltage transmission lines. The proposed method is based on transmission line theory, with the governing equations solved ...

Elsevier2025

Contrasting Views of the Electric Double Layer in Electrochemical CO2 Reduction: Continuum Models vs Molecular Dynamics

Sophia Haussener, Evan Fair Johnson

In the field of electrochemical CO2 reduction, both continuum models and molecular dynamics (MD) models have been used to understand the electric double layer (EDL). MD often focuses on the region within a few nm of the electrode, while continuum models ca ...

Amer Chemical Soc2024

Health Prediction for Lithium-Ion Batteries Under Unseen Working Conditions

Florent Evariste Forest, Yunhong Che

Battery health prediction is significant while challenging for intelligent battery management. This article proposes a general framework for both short-term and long-term predictions of battery health under unseen dynamic loading and temperature conditions ...

Ieee-Inst Electrical Electronics Engineers Inc2024

Dynamic Behavior of Spatially Confined Sn Clusters and Its Application in Highly Efficient Sodium Storage with High Initial Coulombic Efficiency

Lei Zhang, Kumar Varoon Agrawal, Kangning Zhao

Advanced battery electrodes require a cautious design of microscale particles with built-in nanoscale features to exploit the advantages of both micro- and nano-particles relative to their performance attributes. Herein, the dynamic behavior of nanosized S ...

Wiley-V C H Verlag Gmbh2024

Electrochemical devices and computer science: water/thermal management of proton exchange membrane fuel cells and electrolyzers in different scales

Hossein Pourrahmani

The current restrictions on the registration of combustion engines in different countries and the harmful impacts of fossil fuels on the environment and human health have motivated decision-makers to use batteries and/or fuel cells as alternatives for comb ...

EPFL2023

Flexible free-standing Fe-CoP-NAs/CC nanoarrays for high-performance full lithium-ion batteries

Kangning Zhao

In this study, a flexible, free-standing Fe -doped CoP nanoarrays electrode for superior lithium -ion storage has been successfully fabricated. The electrode combines the advantages of a Fe -doping and a flexible carbon cloth (CC) support, resulting in a h ...

Academic Press Inc Elsevier Science2024

Scaling of Planar Sodium-Nickel Chloride Battery Cells to 90 cm2 Active Area

Corsin Battaglia

High-temperature sodium-nickel chloride (Na-NiCl2) batteries offer a competitive solution for stationary energy storage due to their long-term stability, high energy efficiency, and sustainable raw materials. However, scaling up this technology faces chall ...

WILEY-V C H VERLAG GMBH2024

Electrochemical Hydrophobic Tri-layer Interface Rendered Mechanically Graded Solid Electrolyte Interface for Stable Zinc Metal Anode

Lei Zhang, Kangning Zhao

The aqueous zinc-ion battery is promising as grid scale energy storage device, but hindered by the instable electrode/electrolyte interface. Herein, we report the lean-water ionic liquid electrolyte for aqueous zinc metal batteries. The lean-water ionic li ...

Wiley-VCH Verlag GmbH2024

Organic Memristive Devices with Capacitive-Coupled Effect: A Novel Approach for Histamine Sensing

Sandro Carrara

In this work, we developed simple polymer-based memristive devices specifically designed for biosensing applications. The devices consist of two gold electrodes connected by a biocompatible polymeric resistive layer made of poly(3,4 ethyldioxythiophene)pol ...

Institute of Electrical and Electronics Engineers Inc.2024

Sub-mm3 dimensional scaling of fully-integrated additively-fabricated microsupercapacitors for embedded energy storage applications

Vivek Subramanian, Amin Hodaei

Microsupercapacitors (MSCs) are attractive energy devices for applications in IoT, wireless sensors, and other microelectronic systems due to their small footprints. In this work, the dimensional scaling of fully-integrated additively-fabricated MSCs is sy ...

Royal Society of Chemistry2024

Electrochemical-repaired porous graphene membranes for precise ion-ion separation

Kumar Varoon Agrawal, Kangning Zhao, Heng-Yu Chi, Kuang-Jung Hsu, Mojtaba Chevalier, Yueqing Shen, Shuqing Song, Zongyao Zhou

The preparation of atom-thick porous lattice hosting & Aring;-scale pores is attractive to achieve a large ion-ion selectivity in combination with a large ion flux. Graphene film is an ideal selective layer for this if high-precision pores can be incorpora ...

Nature Portfolio2024

Tuning Pore Size in Graphene in the Angstrom Regime for Highly Selective Ion-Ion Separation

Kumar Varoon Agrawal, Kangning Zhao, Luis Francisco Villalobos Vazquez de la Parra, Heng-Yu Chi, Shaoxian Li, Kuang-Jung Hsu, Mojtaba Chevalier, Wan-Chi Lee

Zero-dimensional pores spanning only a few angstroms in size in two-dimensional materials such as graphene are some of the most promising systems for designing ion-ion selective membranes. However, the key challenge in the field is that so far a crack-free ...

Amer Chemical Soc2024

Quantifying mass transport limitations in a microfluidic CO2 electrolyzer with a gas diffusion cathode

Sophia Haussener, Venu Gopal Agarwal

A gas diffusion electrode (GDE) based CO2 electrolyzer shows enhanced CO2 transport to the catalyst surface, significantly increasing current density compared to traditional planar immersed electrodes. A two-dimensional model for the cathode side of a micr ...

2024

Electrolyte engineering via ether solvent fluorination for developing stable non-aqueous lithium metal batteries

Mounir Driss Mensi

Fluorination of solvents, useful for non-aqueous lithium-based batteries, improves the electrochemical stability but decreases the ionic conductivity. Here, the authors report a targeted functionalization of an ether solvent to balance the electrolyte ioni ...

Nature Portfolio2023

Operando Electrochemical Liquid Cell Scanning Transmission Electron Microscopy Investigation of the Growth and Evolution of the Mosaic Solid Electrolyte Interphase for Lithium-Ion Batteries

Corsin Battaglia

The solid electrolyte interphase (SEI) is a key component of a lithium-ion battery forming during the first few dischage/charge cycles at the interface between the anode and the electrolyte. The SEI passivates the anode-electrolyte interface by inhibiting ...

Amer Chemical Soc2023

Zinc carboxylate optimization strategy for extending Al-air battery system's lifetime

Andreas Züttel, Liping Zhong, Thi Ha My Pham, Manhui Wei

Although Al-air batteries are expected to be the candidates for energy conversion systems in renewable energy market due to the higher energy density, richer reserves, and lighter mass of Al metal, the anode self-discharge is seen as a notorious issue that ...

ELSEVIER SCI LTD2023

A water-gating and zinc-sieving lignocellulose nanofiber separator for dendrite-free rechargeable aqueous zinc ion battery

Kangning Zhao

The sustainable development of rechargeable aqueous zinc-ion batteries (RZIBs) is severely limited by the uncontrolled zinc dendritic growth and side reactions on the anode. Herein, a lignocellulose nanofiber (LCNF) separator from waste palm with dual-func ...

ELSEVIER SCIENCE SA2023

How Acid Washing Nickel Foam Substrates Improves the Efficiency of the Alkaline Hydrogen Evolution Reaction

Jan Van Herle, Suhas Nuggehalli Sampathkumar

Nickel foam substrates are frequently utilised as porous 3D substrates for renewable energy applications. The preparation of these substrates usually includes an acid-washing step, but the degree to which this step affects the final electrochemical perform ...

MDPI2023

Voltage-driven Reactivity of Liquid Ga and CuGa Nanoparticles for Electrocatalytic CO2 Reduction and Synthesis

Valery Okatenko

The rising atmospheric level of carbon dioxide, CO2, contributes to climate change and poses urgent need to find scalable solutions both to decrease its emissions and to be able to recycle it, if the goals of Paris Agreement to limit the temperature rise a ...

EPFL2023