Publications related to Study of n- and p-type dopants activation and dopants behavior with respect to annealing conditions in silicon germanium-on-insulator (SGOI)

Related publications (33)

Demonstration of Microwave Resonators and Double Quantum Dots on Optimized Reverse-Graded Ge/SiGe Heterostructures

Pasquale Scarlino, Fabian Oppliger, Franco De Palma

One of the most promising platforms for the realization of spin-based quantum computing are planar germanium quantum wells embedded between silicon-germanium barriers. To achieve comparably thin stacks with little surface roughness, this type of heterostru ...

2024

Silicon CMOS and InGaAs(P)/InP SPADs for NIR/SWIR detection

Utku Karaca

Applications demanding imaging at low-light conditions at near-infrared (NIR) and short-wave infrared (SWIR) wavelengths, such as quantum information science, biophotonics, space imaging, and light detection and ranging (LiDAR), have accelerated the develo ...

EPFL2024

Gibbs sampling the posterior of neural networks

Lenka Zdeborová, Emanuele Troiani, Giovanni Piccioli

In this paper, we study sampling from a posterior derived from a neural network. We propose a new probabilistic model consisting of adding noise at every pre- and post-activation in the network, arguing that the resulting posterior can be sampled using an ...

Iop Publishing Ltd2024

Lithium tantalate photonic integrated circuits for volume manufacturing

Tobias Kippenberg, Johann Emmeram Riemensberger, Mikhail Churaev, Xinru Ji, Zihan Li, Terence Albert Emile Blésin, Chengli Wang, Junyin Zhang, Xi Wang, Chen Yang, Wil Kao, Alisa Davydova

Electro-optical photonic integrated circuits (PICs) based on lithium niobate (LiNbO3) have demonstrated the vast capabilities of materials with a high Pockels coefficient1,2. They enable linear and high-speed modulators operating at complementary metal–oxi ...

2024

Development and characterization of N2O-plasma oxide layers for high-temperature p-type passivating contacts in silicon solar cells

Christophe Ballif, Franz-Josef Haug, Aïcha Hessler-Wyser, Sofia Libraro, Audrey Marie Isabelle Morisset, Julien Hurni, Ezgi Genç, David Fernando Reyes Vasquez

Full-area passivating contacts based on SiOx/poly-Si stacks are key for the new generation of industrial silicon solar cells substituting the passivated emitter and rear cell (PERC) technology. Demonstrating a potential efficiency increase of 1 to 2% compa ...

American Chemical Society (ACS)2024

Theoretical explanation of passivation behavior in OFP-Cu and OF-Cu

Na Li, Du Wen

This research presents a comprehensive comparative analysis of the passivation kinetics of OFP-Cu and OF-Cu in simulated repository electrolyte. The study employs a range of techniques, including potentiodynamic polarization, multi-step potentiostatic pola ...

Pergamon-Elsevier Science Ltd2024

How Reproducible is the Synthesis of Zr-Porphyrin Metal-Organic Frameworks? An Interlaboratory Study

Wendy Lee Queen, Jocelyn Richard Roth

Metal-organic frameworks (MOFs) are a rapidly growing class of materials that offer great promise in various applications. However, the synthesis remains challenging: for example, a range of crystal structures can often be accessed from the same building b ...

Wiley-V C H Verlag Gmbh2024

Font Side Solutions for c-Si Solar Cells with High-Temperature Passivating Contacts

Ezgi Genç

In this work, we studied the potential of using thin films deposited by plasma-enhanced chemical vapor deposition (PECVD) for two main purposes: introducing an n-type passivating contact at the front of a TOPCon solar cell, or simplifying the fabrication o ...

EPFL2024

Shortwave Infrared-Sensitive, Narrowband Organic Upconversion Devices with a Gain

Wei-Hsu Hu

Sensing and imaging of light in the shortwave infrared (SWIR) range is increasingly used in various fields, including bio-imaging, remote sensing, and semiconductor process control. SWIR-sensitive organic photodetectors (OPDs) are promising because organic ...

EPFL2024

Influence of Si3N4 fillers and pyrolysis profile on the microstructure of additively manufactured silicon carbonitride ceramics derived from polyvinylsilazane

Alper Balkan

In this work, various methods were used to improve the printability of a photocurable polyvinylsilazane resin filled with silicon nitride particles for digital light processing. The developed resin was used as a preceramic polymer for polymer-to-ceramic co ...

Taylor & Francis Ltd2024

Photo-doping of spiro-OMeTAD for highly stable and efficient perovskite solar cells

Michael Graetzel, Jacques-Edouard Moser, Etienne Christophe Socie, George Cameron Fish, Aaron Tomas Terpstra, Kai Zhu

A widely used component of high-efficiency perovskite solar cells (PSCs) is the molecular hole-transport material (HTM) spiro-OMeTAD. This organic solid needs to be p-doped to acquire sufficient hole conductivity. However, the conventional doping method us ...

2024

III-V Nitride Semiconductors Deposited At Low Temperature For Photovoltaic Applications

Jonathan Emanuel Thomet

This thesis reports on the study and use of low temperature processes for the deposition of indium gallium nitride (InGaN) thin films in order to alleviate some of the present drawbacks of its monolitic deposition on silicon for photovoltaic applications. ...

EPFL2023

Center-aware Adversarial Augmentation for Single Domain Generalization

Mathieu Salzmann

Domain generalization (DG) aims to learn a model from multiple training (i.e., source) domains that can generalize well to the unseen test (i.e., target) data coming from a different distribution. Single domain generalization (SingleDG) has recently emerge ...

IEEE COMPUTER SOC2023

Semiconductor-based device architectures in multimaterial fibers

William Nicolas Duncan Esposito

Semiconductor materials have given rise to today's digital technology and consumer electronics. Widespread adoption is closely linked to the ability to process and integrate them in devices at scale. Where flexibility and large surfaces are required, such ...

EPFL2023

Surfactant behavior and limited incorporation of indium during in situ doping of GeSn grown by molecular beam epitaxy

Thomas Hagger, Anna Fontcuberta i Morral, Andrea Giunto

GeSn is a promising group-IV semiconductor material for on-chip Si photonics devices and high-mobility transistors. These devices require the use of doped GeSn regions, achieved preferably in situ during epitaxy. From the electronic valence point of view, ...

AMER PHYSICAL SOC2023

New ultrahigh-speed device concepts: from THz nanoplasma devices to glass-like electronics for neuromorphic computation

Mohammad Samizadeh Nikooytabalvandani

There is a never-ending push for electronic systems to provide faster operation speeds, higher energy efficiencies, and higher power capabilities at smaller scales. These requirements are apparent in different areas of electronics, from radiofrequency (RF) ...

EPFL2023

Time-resolved multi-gate ion sensitive field effect transducer and system and method of operating the same

Jean-Michel Sallese, Adil Koukab

A time-resolved multi-gate ion sensitive field effect transducer, including a silicon layer, a P-doped region in the silicon layer and a first electrode in electric connection with the P doped region, a N-doped region in the silicon layer and a second elec ...

2023

Understanding and mitigating resistive losses in fired passivating contacts: role of the interfaces and optimization of the thermal budget

Christophe Ballif, Franz-Josef Haug, Aïcha Hessler-Wyser, Luca Massimiliano Antognini, Sofia Libraro, Audrey Marie Isabelle Morisset, Julien Hurni, Ezgi Genç

This work presents a study of p-type passivating contacts based on SiCx formed via a rapid thermal processing (RTP) step, using conditions compatible with the firing used to sinter screen-printed metallization pastes in industry. The contributions of the t ...

Elsevier2023

Interface connection of functionalized carbon nanotubes for efficient and stable perovskite solar cells

Mohammad Khaja Nazeeruddin, Jianxing Xia

The ionic defects of hetero-junction interfaces always attract and trap carriers via surface electrostatic forces, which are crucial for the efficiency and intrinsic stability of perovskite solar cells (PSCs). Herein, functionalized carbon nanotubes (CNTs) ...

Royal Society of Chemistry2023

FIB-Fabrication of Resonating Cantilevers to Explore Symmetry-Breaking in Quantum Materials

Amelia Emily-Kay Estry

Scientific progress and technological advancements on novel materials are often deterred by limitations on size and quality of samples. Materials with electronic phenomena attractive for applications, and presenting many open scientific questions, are ofte ...

EPFL2023