Publications related to Highly loaded compressor with boundary layer suction

Related publications (30)

An improved analytical framework for flow prediction inside and downstream of wind farms

This study evaluates available analytical wake models for flow prediction inside and downstream of wind farms of different sizes and layouts using large-eddy simulation (LES), and introduces an enhanced analytical framework. All the tested analytical wake ...

Pergamon-Elsevier Science Ltd2024

Noise-induced transitions past the onset of a steady symmetry-breaking bifurcation: The case of the sudden expansion

François Gallaire, Edouard Boujo, Yves-Marie François Ducimetière

We consider fluid flows, governed by the Navier-Stokes equations, subject to a steady symmetry-breaking bifurcation and forced by a weak noise acting on a slow timescale. By generalizing the multiple-scale weakly nonlinear expansion technique employed in t ...

2024

Turbulence in the Strongly Heterogeneous Near-Surface Boundary Layer over Patchy Snow

Michael Lehning, Dylan Stewart Reynolds, Michael Haugeneder

The near-surface boundary layer above patchy snow cover in mountainous terrain is characterized by a highly complex interplay of various flows on multiple scales. In this study, we present data from a comprehensive field campaign that cover a period of 21 ...

2024

Painting Taylor vortices with cellulose nanocrystals: Suspension flow supercritical spectral dynamics

Marianne Liebi

We study the flow stability and spatiotemporal spectral dynamics of cellulose nanocrystal (CNC) suspensions in a custom Taylor-Couette flow cell using the intrinsic shear induced birefringence and liquid crystalline properties of CNC suspensions for flow v ...

Aip Publishing2024

Enhancing Wind Farm Performance through Axial Induction and Tilt Control: Insights from Wind Tunnel Experiments

Fernando Porté Agel, Guillem Armengol Barcos

Static axial induction control and tilt control are two strategies that have the potential to increase power production in wind farms, mitigating wake effects and increasing the available power for downstream turbines. In this study, wind tunnel experiment ...

MDPI2024

Nonlinear simulation of plasma turbulence using a gyrokinetic moment-based approach

Antoine Cyril David Hoffmann

Plasma turbulence plays a fundamental role in determining the performances of magnetic confinement fusion devices, such as tokamaks. Advances in computer science, combined with the development of efficient physical models, have significantly improved our u ...

EPFL2024

The Advection Boundary Law in presence of mean-flow and spinning modes

In the attempt to reduce fuel consumption, a new generation of Ultra-High-By-Pass-Ratio (UHBR) turbofans have been introduced in the aeronautic industry which are structurally noisier especially at lower frequencies, because of their larger diameter, lower ...

SPIE2024

Drag reduction of flexible disks through vortex ring manipulation

Mrudhula Baskaran

Extreme weather events are increasing in frequency in recent years due to global climate change. These events damage infrastructure and pose an open challenge to engineers to design more weather-resistant infrastructure. As engineers, we turn to nature fo ...

EPFL2024

Three-dimensional micro-CT images of UV-frozen flow fronts recorded at different flow regimes

Véronique Michaud, Jacobus Gerardus Rudolph Staal

Segmented micro-CT images of flow fronts produced by UV-flow freezing. Front morphologies correspond to capilary-dominated, equilibrated and viscous-dominated flow regimes. ...

Zenodo2023

The effects of kinematics, flexibility, and planform on the vortex formation and aerodynamic performance of flapping wing flight

Alexander Gehrke

In this thesis, the aerodynamic challenges in flapping wing flight are addressed. In particular, the effects of different wing kinematics, flexibilities, and planforms on the the leading edge vortex development and aerodynamic performance are investigated. ...

EPFL2023

Design, computational and experimental investigation of a small-scale turbopump for organic Rankine cycle systems

Jürg Alexander Schiffmann, Sajjad Zakeralhoseini

The hydraulic design, computational analysis, and experimental investigations of a high-speed small-scale turbopump for mobile waste heat recovery applications based on organic Rankine cycle systems are presented in this paper. Such applications demand hig ...

Elsevier2023

Measurement and modelling of dynamic fluid saturation in carbon reinforcements

Véronique Michaud, Baris Çaglar, Guillaume Clément Broggi, Helena Luisa Teixido Pedarros

We propose a methodology to monitor the progressive saturation of a non-translucent unidirectional carbon fabric stack through its thickness by means of X-ray radiography and extract the dynamic saturation curves using image analysis. Four constant flow ra ...

2023

The effects of a spur dike location in a 90° sharp channel bend on flow field: Focus on anisotropy degree and anisotropy nature

Anton Schleiss

In this research, the flow features around a spur dike located in a 90˚ sharp channel bend have been studied experimentally in detail. Results showed that the effects of the spur dike on upstream sections increased by increasing α (spur dike location from ...

2023

Formation of the cavity on a planar interface subjected to a perturbed shock wave

Ho Ling Li, Naifu Peng

We report the mechanism and modeling for the formation of cavitylike structures on a planar interface subjected to a perturbed shock wave. The cavity is distinguished from bubbles and spikes formed in the standard Richtmyer-Meshkov instability (RMI). The t ...

AMER PHYSICAL SOC2023

Revisiting the role of friction coefficients in granular collapses: confrontation of 3-D non-smooth simulations with experiments

Gauthier Paul Daniel Marie Rousseau

In this paper, transient granular flows are examined both numerically and experimentally. Simulations are performed using the continuous three-dimensional (3-D) granular model introduced in Daviet & Bertails-Descoubes (ACM Trans. Graph., vol. 35, no. 4, 20 ...

Cambridge University Press2023

Cavitation bubble dynamics and microjet atomization near tissue-mimicking materials

Mohamed Farhat, Davide Bernardo Preso, Armand Baptiste Sieber

In recent years, considerable interest has been devoted to the interactions between cavitation bubbles and tissue-mimicking materials due to their promising applications in medicine and biomedical sciences. The strong fluid-structure interaction between a ...

AIP Publishing2023

Small-scale turbopumps for waste heat recovery applications based on an organic Rankine cycle: a study from pre-design to experimental validation

Sajjad Zakeralhoseini

The organic Rankine cycle (ORC) system is among the technologies applied to exploit waste heat in vehicles. Since common organic fluids have lower latent heat than water, higher mass flow rates are required to convert the same waste heat, considerably incr ...

EPFL2023

Small-scale dynamo with finite correlation times

Salim Bennouna

Fluctuation dynamos occur in most turbulent plasmas in astrophysics and are the prime candidates for amplifying and maintaining cosmic magnetic fields. A few analytical models exist to describe their behavior, but they are based on simplifying assumptions. ...

AMER PHYSICAL SOC2023

From thin plates to Ahmed bodies: linear and weakly nonlinear stability of rectangular prisms

Edouard Boujo, Giuseppe Antonio Zampogna

We study the stability of laminar wakes past three-dimensional rectangular prisms. The width-to-height ratio is set to W/H = 1.2, while the length-to-height ratio 1/6 < L/H < 3 covers a wide range of geometries from thin plates to elongated Ahmed bodies. F ...

Cambridge University Press2023

The hunt for the Karman 'constant' revisited

Peter Monkewitz

The log law of the wall, joining the inner, near-wall mean velocity profile (MVP) in wall-bounded turbulent flows to the outer region, has been a permanent fixture of turbulence research for over hundred years, but there is still no general agreement on th ...

Cambridge University Press2023