Publications related to A 420 mu W, 4 GHz Approximate Zero IF FM-UWB Receiver for Short-Range Communications

Integrated Wireless Power, Data Communication, and Thermal Sensing System for Autonomous Multisite Brain Implants

Implanted medical devices (IMDs) have been widely developed to support the monitoring and recording of biological data inside the body or brain. Wirelessly powered IMDs, a subset of implantable electronics, have been proposed to eliminate the limitations r ...

EPFL2024

A 0.14-nJ/b 200-Mb/s 2.7-3.5-GHz Quasi-Balanced FSK Transceiver With PLL-Based Modulation and Sideband Energy Detection

Cong Ding, Bowen Wang

This paper describes a balanced frequency shift keying (FSK) modulation, namely quasi-balanced FSK (QB-FSK), for energy-efficient high-data-rate communication. Not suffering from data-pattern dependency, the proposed modulation method enables frequency mod ...

2024

A modular multiple frequency inductive link to wirelessly power multiple miniaturized implants

Sandro Carrara, Diego Ghezzi, Gian Luca Barbruni

A modular multiple frequency coils inductive link system to wirelessly provide power for at least a medical implant at an output of a receiving coil, whereby the receiving coil is configured to be implanted in an organism. The modular multiple frequency co ...

2024

Additively manufactured stretchable zipping electrostatic actuators

Giulio Grasso

The use of soft and stretchable materials allows the development of adaptive robotic systems and human-machine interfaces that are more natural and comfortable to interact with. One of the application fields that benefits the most from these compliant mate ...

EPFL2024

Active Power Decoupling for Single-Phase Input-Series-Output-Parallel Solid-State Transformers

Drazen Dujic, Tianyu Wei, Andrea Cervone

Solid-state transformers with input-series outputparallel structures are being considered for a variety of applications requiring MVAC to LVDC conversion. Due to the singlephase AC/DC conversion at the input side, all floating cells of the solid-state tran ...

2024

An area efficient inductorless super-regenerative receiver front-end for biomedical implant devices

Catherine Dehollain, Naci Pekçokgüler

Wearable and implantable medical devices are of great importance in diagnosis and treatment as they provide continuous monitoring and data collection. Considering the comfort of the patient and ease-of-operation, these devices require wireless data transmi ...

Elsevier Gmbh2024

Non-contact sensing for anomaly detection in wind turbine blades: A focus-SVDD with complex-valued auto-encoder approach

Olga Fink, Gaëtan Michel Frusque

The occurrence of manufacturing defects in wind turbine blade (WTB) production can result in significant increases in operation and maintenance costs of WTBs, reduce capacity factors of wind farms, and occasionally lead to severe and disastrous consequence ...

2024

Integrated Electronics for Deep Implants to Remotely Monitor Hemodynamics

Mustafa Besirli

The integration of technology in the medical field has greatly improved accuracy in diagnoses, thus leading to more effective treatments. Wearable and implantable medical devices offer great potential for remote patient monitoring, particularly for heart f ...

EPFL2023

Intelligent RF System for Ultra Low Power Spectrum Sensing with Machine Learning

Naci Pekçokgüler

The crowdedness of the RF spectrum constitutes problems in communication, however it also accommodates large amount of useful information. This information can be used to determine existing signals and operating contexts. However, spectrum condition varies ...

EPFL2024

Miniaturised, Wireless and Distributed Neural Interface Toward Cortical Visual Prosthesis

Gian Luca Barbruni

Over the last decades, implantable neural interfaces have been extensively explored and effectively deployed to address neurological and mental health disorders. The existing solutions present several limitations. Firstly, the physical size of the implanta ...

EPFL2023

Fab-to-fab and run-to-run variability in 130 nm and 65 nm CMOS technologies exposed to ultra-high TID

Jean-Michel Sallese, Adil Koukab, Stefano Michelis, Gennaro Termo

The discovery of a large fab-to-fab variability in the TID response of the CMOS technologies used in the design of ASICs for the particle detectors of the HL-LHC triggered a monitoring effort to verify the consistency of the CMOS production process over ti ...

IOP Publishing Ltd2023

A 0.21-ps FOM Capacitor-Less Analog LDO with Dual-Range Load Current for Biomedical Applications

Mahsa Shoaran, Yasemin Engür

This paper presents an output capacitor-less low-dropout regulator (LDO) with a bias switching scheme for biomedical applications with dual-range load currents. Power optimization is crucial for systems with multiple activation modes such as neural interfa ...

ArXiv2023

WINC: A Wireless IoT Network for Multi-Noise Source Cancellation

Haitham Al Hassanieh, Junfeng Guan, Jiaming Wang

This paper introduces Wireless IoT-based Noise Cancellation (WINC) which defines a framework for leveraging a wireless network of IoT microphones to enhance active noise cancellation in noise-canceling headphones. The IoT microphones forward ambient noise ...

Assoc Computing Machinery2023

Design Methodology for Wideband Bowtie Patch Antenna for 5G mmWave Applications

Anja Skrivervik, Abolfazl Azari

Millimeter wave (mmWave) frequencies has become a research area of interest in recent years because of providing broad available bandwidth and thus higher data rates. Wideband mmWave antenna is one of the important development areas in wireless communicati ...

IEEE2023

Self-powered transformer intelligent wireless temperature monitoring system based on an ultra-low acceleration piezoelectric vibration energy harvester

Xin Chen

The wireless sensor nodes used for monitoring the condition of grid equipment always be powered by disposable batteries. However, it introduces disadvantages, such as inconvenient replacement, short lifespan, and envi-ronmental pollution, significantly imp ...

Elsevier2023

Numerical and experimental investigations of a microwave interferometer for the negative ion source SPIDER

Ivo Furno, Rémy Jacquier, Riccardo Agnello

The electron density close to the extraction grids and the co-extracted electrons represent a crucial issue when operating negative ion sources for fusion reactors. An excessive electron density in the plasma expansion region can indeed inhibit the negativ ...

IOP Publishing Ltd2023

REMOTE: Re-thinking Task Mapping on Wireless 2.5D Systems-on-Package for Hotspot Removal

David Atienza Alonso, Giovanni Ansaloni, Marina Zapater Sancho, Darong Huang, Rafael Medina Morillas

2.5D Systems-on-Package (SoPs) are composed by several chiplets placed on an interposer. They are becoming increasingly popular as they enable easy integration of electronic components in the same package and high fabrication yields. Nevertheless, they int ...

2023

Ultra-Low Power Short-Range 60-GHz FMCW Radar Front-End

Sammy Cerida Rengifo

The millimeter wave (mmWave) frequency band is becoming very interesting over the past years because it provides the opportunity to operate using large bandwidths which are not available at lower frequencies. This enables new communication standards suppor ...

EPFL2023

First characterization of the SPIDER beam AC component with the Beamlet Current Monitor

SPIDER is the full scale prototype for the ITER Heating Neutral Beam source, hosted at the Neutral Beam Test Facility in Padova, Italy. The behavior of the beam must be thoroughly investigated to bring the machine's performance in line with ITER's requirem ...

2023

Complex-Valued-Autoencoder for Structural Health Monitoring with Frequency Modulated Continuous Wave Radar

Olga Fink, Gaëtan Michel Frusque

The occurrence of manufacturing defects in wind turbine blade (WTB) production can result in significant increases in operation and maintenance costs of WTBs, reduce capacity factors of wind farms, and occasionally lead to severe and disastrous consequence ...

Research Publishing2023