Publications related to Accelerated Workflow for Antiperovskite-based Solid State Electrolytes

Related publications (33)

A review of thermal management of batteries with a focus on immersion cooling

The performance, cycle life and safety of batteries are strongly influenced by temperature. However, fast charging and discharging can significantly increase heat generation, causing the battery temperature to rise rapidly. Therefore, it is essential to em ...

2025

Health Prediction for Lithium-Ion Batteries Under Unseen Working Conditions

Florent Evariste Forest, Yunhong Che

Battery health prediction is significant while challenging for intelligent battery management. This article proposes a general framework for both short-term and long-term predictions of battery health under unseen dynamic loading and temperature conditions ...

Ieee-Inst Electrical Electronics Engineers Inc2024

Dynamic Behavior of Spatially Confined Sn Clusters and Its Application in Highly Efficient Sodium Storage with High Initial Coulombic Efficiency

Lei Zhang, Kumar Varoon Agrawal, Kangning Zhao

Advanced battery electrodes require a cautious design of microscale particles with built-in nanoscale features to exploit the advantages of both micro- and nano-particles relative to their performance attributes. Herein, the dynamic behavior of nanosized S ...

Wiley-V C H Verlag Gmbh2024

Electrochemical devices and computer science: water/thermal management of proton exchange membrane fuel cells and electrolyzers in different scales

Hossein Pourrahmani

The current restrictions on the registration of combustion engines in different countries and the harmful impacts of fossil fuels on the environment and human health have motivated decision-makers to use batteries and/or fuel cells as alternatives for comb ...

EPFL2023

A pre-fatigue training strategy to stabilize LiCoO2 at high voltage

Lei Zhang, Kangning Zhao

Layered cathodes are among the most promising cathodes for high-energy-density Li-ion batteries, yet hindered by the structural degradation from both bulk strain and surface oxygen loss at high voltage (above 4.5 V). Herein, we report a pre-fatigue trainin ...

Royal Soc Chemistry2024

Organic matters, but inorganic matters too: column examination of elevated mercury sorption on low organic matter aquifer material using concentrations and stable isotope ratios

Lorenz Schwab

Sorption of mercury (Hg) in soils is suggested to be predominantly associated with organic matter (OM). However, there is a growing collection of research that suggests that clay minerals and oxides are also important solid phases for the sorption of solu ...

2024

On the use of Cramér-Rao Lower Bound for least-variance circuit parameters identification of Li-ion cells

Mario Paolone, Vladimir Sovljanski

Electrochemical Impedance Spectroscopy (EIS) and Equivalent Circuit Models (ECMs) are widely used to characterize the impedance and estimate parameters of electrochemical systems such as batteries. We use a generic ECM with ten parameters grouped to model ...

2024

Integrated Wireless Power, Data Communication, and Thermal Sensing System for Autonomous Multisite Brain Implants

Mohammad Javad Karimi

Implanted medical devices (IMDs) have been widely developed to support the monitoring and recording of biological data inside the body or brain. Wirelessly powered IMDs, a subset of implantable electronics, have been proposed to eliminate the limitations r ...

EPFL2024

Electrolyte engineering via ether solvent fluorination for developing stable non-aqueous lithium metal batteries

Mounir Driss Mensi

Fluorination of solvents, useful for non-aqueous lithium-based batteries, improves the electrochemical stability but decreases the ionic conductivity. Here, the authors report a targeted functionalization of an ether solvent to balance the electrolyte ioni ...

Nature Portfolio2023

Zinc carboxylate optimization strategy for extending Al-air battery system's lifetime

Andreas Züttel, Liping Zhong, Thi Ha My Pham, Manhui Wei

Although Al-air batteries are expected to be the candidates for energy conversion systems in renewable energy market due to the higher energy density, richer reserves, and lighter mass of Al metal, the anode self-discharge is seen as a notorious issue that ...

ELSEVIER SCI LTD2023

Operando Electrochemical Liquid Cell Scanning Transmission Electron Microscopy Investigation of the Growth and Evolution of the Mosaic Solid Electrolyte Interphase for Lithium-Ion Batteries

Corsin Battaglia

The solid electrolyte interphase (SEI) is a key component of a lithium-ion battery forming during the first few dischage/charge cycles at the interface between the anode and the electrolyte. The SEI passivates the anode-electrolyte interface by inhibiting ...

Amer Chemical Soc2023

Predictive health assessment for lithium-ion batteries with probabilistic degradation prediction and accelerating aging detection

Florent Evariste Forest, Yunhong Che

Predictive health assessment is of vital importance for smarter battery management to ensure optimal and safe operations and thus make the most use of battery life. This paper proposes a general framework for battery aging prognostics in order to provide t ...

Elsevier Sci Ltd2023

A fluoropolymer bifunctional solid membrane interface for improving the discharge duration in aqueous Al-air batteries

Andreas Züttel, Liping Zhong, Thi Ha My Pham, Manhui Wei, Meixia Zhang

Herein, a fluoropolymer bifunctional solid membrane interface (SMI) for an aqueous Al-air battery is proposed, which inhibits anodic self-corrosion, while concurrently reducing the accumulation of undesirable by-products. A battery using the SMI exhibits a ...

Royal Society of Chemistry2023

Fluoride-Rich, Organic-Inorganic Gradient Interphase Enabled by Sacrificial Solvation Shells for Reversible Zinc Metal Batteries

Lei Zhang, Kangning Zhao

Zinc metal batteries are strongly hindered by water corrosion, as solvated zinc ions would bring the active water molecules to the electrode/electrolyte interface constantly. Herein, we report a sacrificial solvation shell to repel active water molecules f ...

Amer Chemical Soc2023

Fast and Durable Lithium Storage Enabled by Tuning Entropy in Wadsley-Roth Phase Titanium Niobium Oxides

Kangning Zhao, Liping Zhong

Wadsley-Roth phase titanium niobium oxides have received considerable interest as anodes for lithium ion batteries. However, the volume expansion and sluggish ion/electron transport kinetics retard its application in grid scale. Here, fast and durable lith ...

WILEY-V C H VERLAG GMBH2023

A water-gating and zinc-sieving lignocellulose nanofiber separator for dendrite-free rechargeable aqueous zinc ion battery

Kangning Zhao

The sustainable development of rechargeable aqueous zinc-ion batteries (RZIBs) is severely limited by the uncontrolled zinc dendritic growth and side reactions on the anode. Herein, a lignocellulose nanofiber (LCNF) separator from waste palm with dual-func ...

ELSEVIER SCIENCE SA2023

Ion Selective and Water Resistant Cellulose Nanofiber/MXene Membrane Enabled Cycling Zn Anode at High Currents

Kangning Zhao

Aqueous rechargeable zinc ion batteries (ZIBs) are regarded as a promising candidates for next-generation energy storage devices but strongly hindered by the limited utilization of the zinc metal anode (below 5%) due to the active water/anion corrosion. He ...

WILEY-V C H VERLAG GMBH2023

Ageing-aware battery discharge prediction with deep learning

Olga Fink, Luca Biggio

Electrochemical batteries are ubiquitous devices in our society. When employed in mission-critical applications, the ability to precisely predict their end-of-discharge under highly variable operating conditions is of paramount importance in order to suppo ...

ELSEVIER SCI LTD2023

A colloidal aqueous electrolyte modulated by oleic acid for durable zinc metal anode

Kangning Zhao

Continuous dendrites growth, as well as corrosion and side reactions of Zn metal anode seriously hinder the development of aqueous zinc ion batteries. To address these issues, oleic acid (OA) is dispersed into a 2 M ZnSO4 solution to form a novel colloidal ...

ELSEVIER SCIENCE SA2023

Additive Fabrication of Microsupercapacitors

Amin Hodaei

Microsupercapacitors (with footprints from -mm up to -cm scale) have attracted attention for use as electrochemical energy storage devices to power wearables, IoT, and other small microsystems due to their high power density, excellent charge/discharge rev ...

EPFL2023