Publications related to Beyond Flat: Undulated Perovskite Solar Cells on Microscale Si Pyramids by Solution Processing

Related publications (29)

Tuning Electronic and Optical Properties of 2D/3D Interfaces of Hybrid Perovskites through Interfacial Charge Transfer: Prediction of Higher-Efficiency Interface Solar Cells Using Hybrid-DFT Methods

The 2D/3D or 2D/quasi-2D composite mixed-dimensional construction of hybrid perovskite interfaces is gaining increasing attention due to their enhanced stability toward degradation without compromising the corresponding solar cell efficiency. Much of this ...

AMER CHEMICAL SOC2025

Buried Hole-selective Interface Engineering for High-efficiency Tin-lead Perovskite Solar Cells with Enhanced Interfacial Chemical Stability

Guixiang Li

Mixed Sn-Pb perovskites are attracting significant attention due to their narrow bandgap and consequent potential for all-perovskite tandem solar cells. However, the conventional hole transport materials can lead to band misalignment or induce degradation ...

ELSEVIER2025

Efficient Polycrystalline Single-Cation Perovskite Light-Emitting Diodes by Simultaneous Intracrystal and Interfacial Defect Passivation

Mohammad Khaja Nazeeruddin, Emad Oveisi

Polycrystalline perovskite light-emitting diodes (PeLEDs) have shown great promise with high efficiency and easy processability. However, PeLEDs using single-cation polycrystalline perovskite emitters have demonstrated low efficiency due to defects within ...

2025

Enhancing Indoor Photovoltaic Eﬃciency to 37.6% Through Triple Passivation Reassembly and n-Type to p-Type Modulation in Wide Bandgap Perovskites

Michael Graetzel, Lukas Pfeifer

Despite well‐matching indoor illumination spectra, the performance of wide bandgap perovskite solar cells (WB‐PSCs) for indoor photovoltaics (i‐PV) is hindered by photo‐induced halide phase segregation and trap‐assisted non‐radiative recombination. Herein, ...

Wiley2025

Fiber-Coupled Absorption-based Quantum Sensing with Nitrogen Vacancy Ensembles in a Suspended Diamond Photonic Cavity

Darin Ali Naushad Merchant, Christophe Marcel Georges Galland, Amirali Arabmoheghi, Claudio Alejandro Jaramillo Concha, Yuchun Zhu

Low photon extraction efficiency limits the optical spin readout fidelity in emerging quantum sensing technologies in diamond. Here, we propose and fabricate integrated diamond nanoprobes based on cavity-enhanced IR absorption of embedded Nitrogen Vacancy ...

IEEE Computer Society2024

Anomalous Electroluminescence Characteristics of Perovskite Modules

Mohammad Khaja Nazeeruddin, Paul Joseph Dyson

Spatially resolved photoluminescence (PL) and electroluminescence (EL) imaging technologies play a crucial role in evaluating the performance and stability of photovoltaic devices. However, their application in perovskite devices presents unique challenges ...

2024

Infrared-reflective ultrathin-metal-film-based transparent electrode with ultralow optical loss for high efficiency in solar cells

Michael Graetzel, Georgios Kakavelakis

In this work we study in-depth the antireflection and filtering properties of ultrathin-metal-film-based transparent electrodes (MTEs) integrated in thin-film solar cells. Based on numerical optimization of the MTE design and the experimental characterizat ...

Nature Portfolio2024

Perovskite Solar Cells: Challenges Facing Polymeric Hole Selective Materials in p-i-n Configuration

Mohammad Khaja Nazeeruddin

Polymeric hole-selective materials (P-HSMs) offer advantages like solution processability, tunable energy levels, and improved mechanical stability, making them suitable for large-scale and flexible substrates. Poly[bis(4-phenyl) (2,4,6-trimethylphenyl) am ...

WILEY-V C H VERLAG GMBH2024

Best practices in measuring absorption at the macro- and microscale

Giulia Tagliabue, Alan Richard Bowman, Fateme Kiani Shahvandi, Jiaming Ma, German Garcia Martinez

The fraction of light absorbed in a material is a key parameter for a wide range of optoelectronic and energy devices, including solar cells, light emitting diodes, and photo(electro)chemical devices. It can reveal detailed performance information and esta ...

2024

Methylammonium Nitrate-Mediated Crystal Growth and Defect Passivation in Lead Halide Perovskite Solar Cells

Michael Graetzel, Shaik Mohammed Zakeeruddin, Kevin Sivula, Jun Ho Yum, Yeonju Kim

Additive engineering has been a crucial strategy to improve photovoltaic properties by reducing carrier trap centers or increasing carrier diffusion lengths in the lead halide perovskite active layer. We introduced a small amount of CH3NH3 +NO3 - (methylam ...

Amer Chemical Soc2024

Synergistic Redox Modulation for High-Performance Nickel Oxide-Based Inverted Perovskite Solar Modules

Mohammad Khaja Nazeeruddin, Bin Ding, Xianfu Zhang

Nickel oxide (NiOx)-based inverted perovskite solar cells stand as promising candidates for advancing perovskite photovoltaics towards commercialization, leveraging their remarkable stability, scalability, and cost-effectiveness. However, the interfacial r ...

Wiley2024

Integration of Metal Meshes as Transparent Conducting Electrodes into Perovskite Solar Cells

Andreas Schueler, Jérémy Jacques Antonin Fleury, René Uwe Schneider, Jakob Heier, Chiara Ongaro

As the demand for photovoltaic technologies continues to grow, the quest for efficient and sustainable transparent conducting electrodes (TCEs) rapidly rises. Traditional solutions, such as indium tin oxide (ITO), face challenges related to indium scarcity ...

Wiley2024

Quasi-Planar Core Based Spiro-Type Hole-Transporting Material for Dopant-Free Perovskite Solar Cells

Mohammad Khaja Nazeeruddin, Jianxing Xia

Hole-transporting material (HTMs) are crucial for obtaining the stability and high efficiency of perovskite solar cells (PSCs). However, the current state-of-the-art n-i-p PSCs relied on the use of 2,2′,7,7′-tetrakis(N,N-di-p-methoxyphenylamine)-9,9′-spiro ...

Wiley-VCH Verlag GmbH2024

All-SnO2-Based Conformal Electron Transport Layer for Efficient Perovskite Solar Cells

Likai Zheng

The fabrication of high-performance perovskite solar cells on high-haze fluorine-doped tin oxide (FTO) substrates with superior light-trapping capabilities necessitates a highly conformal electron transport layer at the bottom interface. Herein, a conforma ...

2024

Combined Vacuum Evaporation and Solution Process for High-Efficiency Large-Area Perovskite Solar Cells with Exceptional Reproducibility

Michael Graetzel

Organic-inorganic hybrid perovskites exhibit outstanding performances in perovskite solar cells (PSCs). However, the complex solution chemistry of perovskites precursors renders it difficult to prepare large-area devices in a reproducible way, which is a p ...

Wiley-V C H Verlag Gmbh2023

Oriented nucleation in formamidinium perovskite for photovoltaics

Mohammad Khaja Nazeeruddin, Paul Joseph Dyson, Bin Ding, Yong Ding

The black phase of formamidinium lead iodide (FAPbI(3)) perovskite shows huge promise as an efficient photovoltaic, but it is not favoured energetically at room temperature, meaning that the undesirable yellow phases are always present alongside it during ...

NATURE PORTFOLIO2023

Next-generation applications for integrated perovskite solar cells

Mohammad Khaja Nazeeruddin

Organic/inorganic metal halide perovskites attract substantial attention as key materials for next-generation photovoltaic technologies due to their potential for low cost, high performance, and solution processability. The unique properties of perovskites ...

SPRINGERNATURE2023

Nonclassical Nucleation and Crystallization of LiNbO3 Nanoparticles from the Aqueous Solvothermal Alkoxide Route

Sandrine Gerber, Aurélien Bornet, Adrian Stefan Gheata

The exact molecular reaction pathway and crystallization mechanisms of LiNbO3 nanoparticles under solvothermal conditions are derived through extensive time- and temperature-resolved experiments allowing to track all the transient molecular and solid speci ...

Wiley-V C H Verlag Gmbh2023

Single-crystalline TiO2 nanoparticles for stable and efficient perovskite modules

Mohammad Khaja Nazeeruddin, Paul Joseph Dyson, Hiroyuki Kanda, Bin Ding, Wen Luo, Yong Ding, Keith Gregory Brooks, Valentin Ianis Emmanuel Queloz, Yen-Cheng Liu

The incorporation of electron transport layers based on single-crystalline TiO2 rhombohedral nanoparticles enables the realization of stable and efficient large-area perovskite solar cell modules. ...

Nature Portfolio2022

Modulating the Electron Transporting Properties of Subphthalocyanines for Inverted Perovskite Solar Cells

Mohammad Khaja Nazeeruddin, Hiroyuki Kanda, Maria Cristina Momblona Rincón

The lack of organic non-fullerene ETMs with good electron transport and device stability is an important problem for the further development and commercialization of perovskite solar cells. Herein, the use of SubPcs as ETMs in PSCs is explored. To this end ...

FRONTIERS MEDIA SA2022