Doping Evolution and Junction Formation in Stacked Cyanine Dye Light-Emitting Electrochemical Cells

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Mixed Sn-Pb perovskites are attracting significant attention due to their narrow bandgap and consequent potential for all-perovskite tandem solar cells. However, the conventional hole transport materials can lead to band misalignment or induce degradation ...

The 2D/3D or 2D/quasi-2D composite mixed-dimensional construction of hybrid perovskite interfaces is gaining increasing attention due to their enhanced stability toward degradation without compromising the corresponding solar cell efficiency. Much of this ...

A thermal diode, which, by analogy to its electrical counterpart, rectifies heat current, is the building block for thermal circuits. To realize a thermal diode, we demonstrate thermal rectification in a GaAs telescopic nanowire system using the thermal br ...

The rapid crystallization of mixed tin‐lead (Sn‐Pb) perovskites and their dependence on antisolvent processes limit the development of large‐area Sn‐Pb perovskite solar cells (PSCs). Vacuum‐flash‐assisted solution processing (VASP) has emerged as a promisi ...

Hydrogels have emerged as promising materials for bioelectronic interfaces due to their tissue-like properties and high-water content. However, conventional hydrogels often suffer from poor electrical conductivity and mechanical stability, limiting their p ...

Spatially resolved photoluminescence (PL) and electroluminescence (EL) imaging technologies play a crucial role in evaluating the performance and stability of photovoltaic devices. However, their application in perovskite devices presents unique challenges ...

We introduce a new family of single-photon avalanche diodes (SPADs) with enhanced depletion regions in a 55-nm Bipolar-CMOS-DMOS (BCD) technology. We demonstrate how to systematically engineer doping profiles in the main junction and in deep p-well layers ...

In this work, we studied the potential of using thin films deposited by plasma-enhanced chemical vapor deposition (PECVD) for two main purposes: introducing an n-type passivating contact at the front of a TOPCon solar cell, or simplifying the fabrication o ...

Sensing and imaging of light in the shortwave infrared (SWIR) range is increasingly used in various fields, including bio-imaging, remote sensing, and semiconductor process control. SWIR-sensitive organic photodetectors (OPDs) are promising because organic ...

In the past decades, a significant increase of the transistor density on a chip has led to exponential growth in computational power driven by Moore's law. To overcome the bottleneck of traditional von-Neumann architecture in computational efficiency, effo ...

Applications demanding imaging at low-light conditions at near-infrared (NIR) and short-wave infrared (SWIR) wavelengths, such as quantum information science, biophotonics, space imaging, and light detection and ranging (LiDAR), have accelerated the develo ...

In this work, we present a concept that leverages the strong piezoelectric polarization field in InGaN, which counteracts the external electric field at reverse bias. We show that despite the smaller InGaN band-gap and lower critical electric field, its st ...

The engineering of tin halide perovskites has led to the development of p-type transistors with field-effect mobilities of over 70 cm2 V-1 s-1. However, due to their background hole doping, these perovskites are not suitable for n-type transistors. Ambipol ...

The development of cost-effective and earth-abundant semiconducting materials is imperative for the sustainable deployment of photovoltaic technology. Zinc phosphide (Zn3P2) is a promising candidate for terawatt-scale electricity generation. It has a near- ...

A widely used component of high-efficiency perovskite solar cells (PSCs) is the molecular hole-transport material (HTM) spiro-OMeTAD. This organic solid needs to be p-doped to acquire sufficient hole conductivity. However, the conventional doping method us ...

Hydrogenated amorphous silicon (a-Si:H) is a material with a very good radiation hardness and with the possibility of deposition on flexible substrates like Polyimide (PI). Exploiting these properties, the HASPIDE (Hydrogenated Amorphous Silicon PIxels DEt ...

Semiconductor materials have given rise to today's digital technology and consumer electronics. Widespread adoption is closely linked to the ability to process and integrate them in devices at scale. Where flexibility and large surfaces are required, such ...

Hole-transporting material (HTMs) are crucial for obtaining the stability and high efficiency of perovskite solar cells (PSCs). However, the current state-of-the-art n-i-p PSCs relied on the use of 2,2′,7,7′-tetrakis(N,N-di-p-methoxyphenylamine)-9,9′-spiro ...

GeSn is a promising group-IV semiconductor material for on-chip Si photonics devices and high-mobility transistors. These devices require the use of doped GeSn regions, achieved preferably in situ during epitaxy. From the electronic valence point of view, ...

Efficient and robust n-i-p perovskite solar cells necessitate superior organic hole-transport materials with both mechanical and electronic prowess. Deciphering the structure-property relationship of these materials is crucial for practical perovskite sola ...

Doping Evolution and Junction Formation in Stacked Cyanine Dye Light-Emitting Electrochemical Cells

Chat with Graph Search

Buried Hole-selective Interface Engineering for High-efficiency Tin-lead Perovskite Solar Cells with Enhanced Interfacial Chemical Stability

Tuning Electronic and Optical Properties of 2D/3D Interfaces of Hybrid Perovskites through Interfacial Charge Transfer: Prediction of Higher-Efficiency Interface Solar Cells Using Hybrid-DFT Methods

Thermal Rectification in Telescopic Nanowires: Impact of Thermal Boundary Resistance

High‐Efficiency Sn‐Pb Perovskite Solar Cells via Nucleation and Crystallization Control

Direct laser writing of electronically conductive microstructures within soft hydrogel substrates

Anomalous Electroluminescence Characteristics of Perovskite Modules

Doping Engineering for PDP Optimization in SPADs Implemented in 55-nm BCD Process

Font Side Solutions for c-Si Solar Cells with High-Temperature Passivating Contacts

Shortwave Infrared-Sensitive, Narrowband Organic Upconversion Devices with a Gain

Towards Scalable Electronics: Synthetic 2D Materials for Large-Area 2D Circuit Integration

Silicon CMOS and InGaAs(P)/InP SPADs for NIR/SWIR detection

Polarization-enhanced GaN Schottky barrier diodes: Ultra-thin InGaN for high breakdown voltage and low Ron

Strain relaxation and multidentate anchoring in n-type perovskite transistors and logic circuits

Zn3P2 as an earth-abundant photovoltaic material: from growth to device

Photo-doping of spiro-OMeTAD for highly stable and efficient perovskite solar cells

HASPIDE: a project for the development of hydrogenated amorphous silicon radiation sensors on a flexible substrate

Semiconductor-based device architectures in multimaterial fibers

Quasi-Planar Core Based Spiro-Type Hole-Transporting Material for Dopant-Free Perovskite Solar Cells

Surfactant behavior and limited incorporation of indium during in situ doping of GeSn grown by molecular beam epitaxy

Durable Perovskite Solar Cells with 24.5% Average Efficiency: The Role of Rigid Conjugated Core in Molecular Semiconductors