Andres Osorio SalazarExpertise
Robotics, advanced actuator design, soft actuators, sensor design, embedded systems, human-machine interface architecture, electronic-less control, mechanism design, additive and traditional manufacturing, industrial automation, process control, and fluid robotics.
Current Work
Smart Footwear for Diabetic Foot Care and Ulcer PreventionEvery 20 seconds, a person with diabetes has to face an amputation somewhere in the world. The main risk factor is high plantar pressure combined with foot nephropat
Simon HolzerHi, I am Simon Holzer. I received my B.Sc. and M.Sc. degrees in mechanical engineering with a focus on microtechnology from the Swiss Federal Institute of Technology Zurich (ETHZ) in 2020 and 2022, respectively. I am currently working towards Ph.D. in the Integrated Actuators Laboratory (LAI) at EPFL in Neuchâtel, Switzerland. My research interests lie in the field of soft robotics, artificial muscles, and biomechanics.
Bokeon KwakExpertise
Bio-inspired robotics, Edible Robotics, Soft Robotics
Pasquale ScarlinoI obtained my master's degree in Physics at the University of Salento, Lecce (Italy) in February 2011. During 2006-2011, I have also been a student of Scuola Superiore ISUFI (SSI). SSI is one of six schools of excellence established in Italy to develop the intellectual capital in technological and social sciences. I conducted an external Master thesis project during an 8 months internship in the Quantum Transport Group at TU Delft, under the supervision of Prof. L.M.K. Vandersypen. There, I implemented the Quantum Point Contact Radio-Frequency Reflectometry technique, which allows increasing the single-shot electron spin readout bandwidth and is currently routinely used in the group.I obtained my Ph.D. degree in February 2016, in the Spin Qubits group of Prof. L.M.K. Vandersypen at the Kavli Institute of Nanoscience-Qutech (TU Delft). During my Ph.D. I have been leading the Si/SiGe spin qubits project, collaborating with the M. Eriksson Group at Wisconsin University. In parallel, I have been working on other different projects, in particular with GaAs depletion quantum dots, high impedance superconducting resonators, and surface acoustic wave resonators. I have been working as a Postdoc fellow in the group of Prof. A. Wallraff (Quantum Device Lab) at ETH Zurich. My main project, in collaboration with the group of Prof. K. Ensslin and Prof. T. Ihn, consisted in integrating semiconductor and superconductor technologies. Realizing a well-controlled interface between the semiconductor and superconductor-based quantum information technologies may allow harnessing the best of both device architectures, for example by providing an interface between strongly coupled charge state and high coherence spin states. Furthermore, it enables the possibility to explore light/matter hybridization in a class of solid-state systems and regimes that are new in the context of quantum optics.From June 2019 till September 2020, I have been a Senior Researcher at Microsoft Station Q Copenhagen and at the Center for Quantum Devices in Copenhagen, focusing on developing semiconductor-superconducting hybrid hardware for topologically protected quantum computation.Since October 2020, I am a tenure track Assistant Professor of Physics in the School of Basic Sciences at the EPFL where I founded the Hybrid Quantum Circuit (HQC) laboratory.
Elisabeth AgoritsasExpertise
=> See my personal homepage for more content https://eagoritsas.wordpress.com.Statistical physics of classical disordered systems, with focus on specific classes of models:disordered elastic interfaces and random manifolds,mesoscopic elasto-plastic models (spatially-resolved and effectively mean-field versions),mean-field description of structurally disordered systems (e.g. glasses) in infinite dimensions,continuous random perceptron model.1D Kardar-Parisi-Zhang equation and its encompassing unive Rosane Moura Dos Santos BarrettinoEducation Ph.D. in Materials Science and Technology | "Development of a Novel Electrically Conductive FlameRetardant Bio-based Thermoplastic Polyurethane" 2012 – 2015 Polytechnic of Turin, Turin, Italy Master of Science in Engineering | “Preparation and Characterization of ThermoplasticElastomer Micro and Nanocomposites with Modify Tribology Properties†2009 – 2011 University of Applied Sciences of Southern Switzerland (SUPSI), Manno, Switzerland. BSc in Che
Marianne LiebiMarianne Liebi is Tenure-Track Assistant Professor at EPF Lausanne and head of the Laboratory for X-ray characterization of materials (cam-X) and the group “
Structure and Mechanics of Advanced Materials
” at PSI. She has been appointed in 2021 at EPFL where she is part of the Institute of Materials within the School of Engineering. Marianne Liebi studied Food Science at ETH Zurich where she also obtained her PhD in 2013 in the Laboratory of Food Process Engineering lead by Prof. Erich J. Windhab. Within this project started using small-angle neutron scattering at PSI for the characterization of soft-matter, namely of magnetic alignable self-assembly structures. As a Postdoc in the coherent X-ray scattering group at the Swiss Light Source she worked from 2013-2016 on method development in SAXS tensor tomography. In 2016 she moved to Sweden where after a short period at the NanoMAX beamline, MAXIV Laboratory, Lund she started her own research group in 2017 as Assistant Professor at the Chalmers University of Technology, Gothenburg, and became Docent in Physics in spring 2020. She kept her affiliation at Chalmers University of Technology, where still part of her group is located (
Liebi research group
) when moving back to Switzerland in 2020 where she was Scientific Group Leader in the Center for X-ray Analytics at Empa, St.Gallen, before starting the joint position between EPFL and PSI in November 2021.
Victor Carle Adrien BoureauExpertise
Aberration-corrected TEM and STEMQuantative microscopyElectron diffractionStrain mapping (GPA, precession 4D-STEM)Electric and magnetic field mapping (electron holography, DPC, 4D-STEM)
Teaching & PhD Past EPFL PhD Students as codirector Pierpaolo Ranieri Courses Scanning and Analytical Transmission Electron Microscopy MSE-735 This intensive course discusses advanced TEM techniques such as: scanning TEM; analytical TEM using EELS and EDX; aberration corrected imaging; and image s
Amine BenouhibaAmine Benouhiba graduated from the Preparatory School of Science and Technology, Algeria, in 2012. He received his engineering degree in material engineering from Ecole Nationale Polytechnique (ENP), Algeria, in 2015. He also received his master’s degree in innovative materials from Ecole centrale de Lyon (ECL) in 2016. He completed his Ph.D. degree in 2020 at the Bourgogne-Franche-Comté University. Currently, he is a postdoctoral researcher at Ecole polytechnique fédérale de Lausanne (EPFL). His research interests include the design and development of soft robotics, origami-inspired structures and microrobotics.
Junsoo KimExpertise
Artificial Muscles, Electrostatic Actuators, Wearable Robotics, Humanoid Robotics
Radoslav MarchevskiTeaching & PhD PhD Students Jou An Chen, Tobias Alexandre Monnard, Xiafei Chang, Gauri Napoletano, Kerim Guseinov, Noémie Duc Courses Particle physics I PHYS-415 Presentation of particle properties, their symmetries and interactions.Introduction to quantum electrodynamics and to the Feynman rules. Particle physics: the flavour frontiers PHYS-471 This course will present experimental aspects of flavour physics primarily in the quark sector but also in the lepton sector and
Qiucheng XuExpertise
- Operando Water and Ion Transport: I pioneered operando high-energy X-ray scattering and fluorescence (WAXS/SAXS/XRF) to directly visualize water and ion transport in membrane–electrode assemblies. These studies revealed how water movement, flooding, and salt formation govern degradation in CO/CO2 electrolysis, establishing the dynamic transport mechanisms in confined electrochemical environments. (Nat. Nanotechnol. 2025; Joule 2024; Nat. Catal. 2023)2. Design of Membrane-Electrode Interface: I
Luis Miguel Garcia MartinTeaching & PhD Courses Master project in Physics PHYS-599(b) The student realises a research project in a physics laboratory or in a company. Particle physics: the flavour frontiers PHYS-471 This course will present experimental aspects of flavour physics primarily in the quark sector but also in the lepton sector and their role in the development of the Standard Model of particle physics.
Alexandre Brea RodriguezTeaching & PhD Courses Selected topics in nuclear and particle physics PHYS-400 This course presents the physical principles and the recent research developments on three topics of particle and nuclear physics: the physics of neutrinos, dark matter, and plasmas of quarks and gluons. An emphasis is given on experimental aspects in these three research fields.
Anni Matilda KauniskangasCurrent Work
I am currently working as a doctoral researcher as a part of Prof. Shchutska's group in experimental particle physics. I am a member of the LHCb and SND@LHC collaborations. My PhD thesis work is mainly focused on performing a measurement of a rare B-meson decay process using the data from the LHCb experiment.
Education MSci Physics | 2018 – 2022 Imperial College London
ResearchCurrent Research Fields Experimental high-energy physics (flavour physics)
Teaching & PhDPast teachin
