Simone IadanzaTeaching & PhD Courses Nanophotonics MICRO-516 Students understand and apply the physics of the interaction of light with semiconductors. They understand the operating mechanism of scaled photonic devices such as photodetectors, LEDs and lasers, as well as challenges and opportunities relating to their integration and dimensional scaling.
Christoph BostedtTeaching & PhD PhD Students Eloisa Florence Manetti, Wenyi Jiang, Hankai Zhang, Loïc Lucien Cédric Bassement, Silas Strebel, Eliot Jermann Past EPFL PhD Students Jonas Knurr, Ningchen Yang Courses Optical methods in chemistry CH-417 Introduction and application of photon based tools for chemical sciences: from basic concepts to optical and x-ray lasers Physical Chemistry Seminar 1: Trends CH-643 Students can learn about the broader research in Phyiscal Chemistry and broaden
Gregor JotzuGregor Jotzu is heading the Dynamic Quantum Materials Laboratory (DQML) at EPFL. His research concerns the control of quantum materials using intense low-frequency laser pulses and the dynamics of order formation in strongly correlated quantum systems.After reading physics at the University of Oxford, he became the 2009/2010 Michael von Clemm Fellow at Harvard University. He received his doctorate from ETH Zurich, where he studied quantum magnetism and driving-induced order using ultracold atoms in optical
Victor Carle Adrien BoureauExpertise
Aberration-corrected TEM and STEMQuantative microscopyElectron diffractionStrain mapping (GPA, precession 4D-STEM)Electric and magnetic field mapping (electron holography, DPC, 4D-STEM)
Teaching & PhD Past EPFL PhD Students as codirector Pierpaolo Ranieri Courses Scanning and Analytical Transmission Electron Microscopy MSE-735 This intensive course discusses advanced TEM techniques such as: scanning TEM; analytical TEM using EELS and EDX; aberration corrected imaging; and image s
Francesca RodinoExpertise
Electrochemical BiosensorsSensors and Biosensors interfaces | front-end electronicsBiomedical circuits and systems
Francesca Rodino received the B.Sc. and M.Sc. degrees in Biomedical Engineering from the Politecnico di Torino, Turin, Italy, in 2019 and 2022, respectively. She developed her Master's project in the field of cortical neuroprosthesis devices for artificial vision in collaboration with the Integrated Circuits Laboratory (ICLAB) at école Polytechnique Fédérale de Lausanne (EPFL) in Swit
Sergey ShevchikTeaching & PhD PhD Students Golnoosh Abdollahinejad Courses Materials processing with intelligent systems MICRO-457 Repeatability in laser material processing is challenging due to high-speed dynamics. To address this issue, the course provides an overview of laser theory, laser-material interaction, various types of sensors (acoustic & optic), data acquisition, online monitoring, and control via machine learning
Zheru QiuBefore joining LPQM, I graduated from University of Science and Technology of China with a bachelor's degree. In USTC, I actively worked in Prof. Zheng-tian Lu's research group and I mainly participated in the atomic magnetometer project led by Prof. Dong Sheng.
Pascal Alexander SchouwinkTeaching & PhD Courses Advanced Solid State and Surface Characterization CH-633 State-of-the-art surface/thin film characterization methods of polycrystalline/nano/amorphous materials. Selected topics from X-ray scattering (SAXS/GISAXS, PDF, GIWAXS, HRXRD), electronic and optical spectroscopy (XPS, AES, SERS, TERS), scanning probe and electron microscopy (STM, AFM, HRTEM, SEM). Principles and Applications of X-ray Diffraction CH-632 Basic theoretical aspects of Crystallograph
Vivek SubramanianTeaching & PhD PhD Students Giovanni Ruffolo, Giada Romano, Sanjay Manoharan, Kyle Haas, Claude Dahan, Biruktait Ayele Lemecho, Yagmur Ceren Alatas, Tugçe Delipinar Past EPFL PhD Students Amin Hodaei, Mustafa Mohieldin Fadlelmula Fadlelseed Past EPFL PhD Students as codirector Mohammad Jafarpour Courses Organic and printed electronics MICRO-505 This course addresses the implementation of organic and printed electronics technologies using large area manufacturing techniques. It will provide
Virginia CarnevaliExpertise
Theoretical condensed matter physics: theory and simulations of structural, electronic, magnetic and optical properties (Quantum ESPRESSO), ab-initio molecular dynamics (CP2K), and Kinetic Monte Carlo codes; automate Quantum ESPRESSO workflows and high-throughput calculations (AFLOWÏ€); generation of tight-binding hamiltonians, transport properties, and data analysis (PAOFLOW).Materials for photovoltaic: Pb- and Sn-based organic perovskites; investigation and improvement of the HTL-ETL interaction
Daryl Yee Wei LiangIncoming Assistant Professor of Electrical and Microengineering (March 2023)
Valerio PiazzaTeaching & PhD PhD Students Claire Valentine Blaga, Matilde Cantele, Julia Sarah Marhic Past EPFL PhD Students as codirector Michele Zendrini Courses Functional properties of materials MSE-210 The main objective of this course is to present the concepts allowing the understanding of the fundamental principles that enable to predict the properties of the materials. The goal is that with these concepts, one will be able to realize material design and/or to understand novel materials.
Simone BianconiExpertise
Remote Sensing, LiDAR, Laser Spectroscopy, Photodetectors, Material Science
Simone Bianconi is a postdoctoral scholar at EPFL in the group of Tobias Kippenberg at the Laboratory of Photonics and Quantum Measurements. His research interests focus on leveraging integrated photonics for laser ranging and sensing (e.g. LiDAR).He was previously at the Jet Propulsion Laboratory (Caltech) as a postdoctoral fellow at the Microdevices Laboratory, where he worked on the research and development of innovativ
Yegor PiskarevExpertise
Medical Device Engineering & Development: I have hands-on experience in the complete lifecycle of medical device development, from concept to preclinical validation and regulatory compliance. I led the design and development of three cardiac ablation catheters, which are class III medical devices, meeting strict FDA and MDR/MDD requirements. Currently, I am overseeing the transition of an ENT medical device from proof-of-concept to a commercial product, including establishing a quality management
Pedro Miguel Nunes Pereira de Almeida ReisPedro M. Reis is a Professor of Mechanical Engineering at the École Polytechnique Fédérale de Lausanne (EPFL) in Switzerland, where he is the Director of the Institute of Mechanical Engineering. Prof. Reis received a B.Sc. in Physics from the University of Manchester, UK (1999), a Certificate of Advanced Studies in Mathematics (Part III Maths) from St. John’s College and DAMTP, University of Cambridge (2000), and a Ph.D. in physics from the University of Manchester (2004). He was a postdoc at the City College of New York (2004-2005) and at the CNRS/ESPCI in Paris (2005-2007). He joined MIT in 2007 as an Instructor in Applied Mathematics. In 2010 he moved to MIT’s School of Engineering, with dual appointments in Mechanical Engineering and Civil & Environmental Engineering, first as the Esther and Harold E. Edgerton Assistant Professor and, since the summer of 2014 as Gilbert W. Winslow Associate Professor. In October 2013, the Popular Science magazine named Prof. Reis to its 2013 “Brilliant 10” list of young stars in Science and Technology. He has received the 2014 CAREER Award (NSF), the 2016 Thomas J.R. Hughes Young Investigator Award (Applied Mechanics Division of the ASME), the 2016 GSOFT Early Career Award for Soft Matter Research (APS), he is a Fellow of the APS, and he is the 2021 President of the Society of Engineering Science (SES).
Andrey VoloshinA qualified researcher who showed his ability to reach outstanding results in modern photonics. Working at the interface of fundamental science and industrial applications gave him a unique chance to develop state-of-the-art photonic devices. Andrey developed a fully integrated electrically pumped soliton microcomb in 2017. Moreover, management and startup experience taught him how to achieve the maximum result with limited resources.
Jiaye WuJiaye is a Post-Doc at PHOSL, STI-IEM, EPFL. His expertise and current research interests span ultrafast light-matter-interactions, nonlinear optics and nanophotonics in epsilon-near-zero materials, fibre, fibre laser, and waveguide network design, functional thin film design, and non-Hermitian optics. He received Ph.D. degree from EPFL in 2025 with early graduation, M.Sc. degree from Peking University in 2021 with the highest honours and B.Sc. degree from South China Normal University in 2018 with distinct
