Victor Carle Adrien BoureauExpertise
Aberration-corrected TEM and STEMQuantative microscopyElectron diffractionStrain mapping (GPA, precession 4D-STEM)Electric and magnetic field mapping (electron holography, DPC, 4D-STEM)
Teaching & PhD Past EPFL PhD Students as codirector Pierpaolo Ranieri Courses Scanning and Analytical Transmission Electron Microscopy MSE-735 This intensive course discusses advanced TEM techniques such as: scanning TEM; analytical TEM using EELS and EDX; aberration corrected imaging; and image s
Gloria PorroExpertise
Microfluidics; point-of-care diagnostics; lab-on-chip; bioanalytics; bead-based assays; dielectrophoresis; particle sorting; deterministic lateral displacement.
Current work
Currently developing micro-electromechanical actuators for microparticle manipulation in microfluidics. We are exploiting regular arrangements of three-dimensional electrodes in microchannels as active modules to perform complex bioanalytical steps in a lab-on-chip compact and automatized format. In particular, we aim at apply
Zheru QiuBefore joining LPQM, I graduated from University of Science and Technology of China with a bachelor's degree. In USTC, I actively worked in Prof. Zheng-tian Lu's research group and I mainly participated in the atomic magnetometer project led by Prof. Dong Sheng.
Zihan LiGraduated from University of Science and Technology of China with a bachelor’s degree in optics. And now, I am working on LiNbO3 integrated photonic device and related nanofabrication technology.
Pasquale ScarlinoI obtained my master's degree in Physics at the University of Salento, Lecce (Italy) in February 2011. During 2006-2011, I have also been a student of Scuola Superiore ISUFI (SSI). SSI is one of six schools of excellence established in Italy to develop the intellectual capital in technological and social sciences. I conducted an external Master thesis project during an 8 months internship in the Quantum Transport Group at TU Delft, under the supervision of Prof. L.M.K. Vandersypen. There, I implemented the Quantum Point Contact Radio-Frequency Reflectometry technique, which allows increasing the single-shot electron spin readout bandwidth and is currently routinely used in the group.I obtained my Ph.D. degree in February 2016, in the Spin Qubits group of Prof. L.M.K. Vandersypen at the Kavli Institute of Nanoscience-Qutech (TU Delft). During my Ph.D. I have been leading the Si/SiGe spin qubits project, collaborating with the M. Eriksson Group at Wisconsin University. In parallel, I have been working on other different projects, in particular with GaAs depletion quantum dots, high impedance superconducting resonators, and surface acoustic wave resonators. I have been working as a Postdoc fellow in the group of Prof. A. Wallraff (Quantum Device Lab) at ETH Zurich. My main project, in collaboration with the group of Prof. K. Ensslin and Prof. T. Ihn, consisted in integrating semiconductor and superconductor technologies. Realizing a well-controlled interface between the semiconductor and superconductor-based quantum information technologies may allow harnessing the best of both device architectures, for example by providing an interface between strongly coupled charge state and high coherence spin states. Furthermore, it enables the possibility to explore light/matter hybridization in a class of solid-state systems and regimes that are new in the context of quantum optics.From June 2019 till September 2020, I have been a Senior Researcher at Microsoft Station Q Copenhagen and at the Center for Quantum Devices in Copenhagen, focusing on developing semiconductor-superconducting hybrid hardware for topologically protected quantum computation.Since October 2020, I am a tenure track Assistant Professor of Physics in the School of Basic Sciences at the EPFL where I founded the Hybrid Quantum Circuit (HQC) laboratory.
Yegor PiskarevExpertise
Medical Device Engineering & Development: I have hands-on experience in the complete lifecycle of medical device development, from concept to preclinical validation and regulatory compliance. I led the design and development of three cardiac ablation catheters, which are class III medical devices, meeting strict FDA and MDR/MDD requirements. Currently, I am overseeing the transition of an ENT medical device from proof-of-concept to a commercial product, including establishing a quality management
Anat SiddharthExpertise
Nonlinear Optics, Integrated Photonics, Frequency Comb, Nonreciprocity
Research Interest Nonlinear Optics, Integrated Photonics, Frequency Comb, Nonreciprocity
Simone BianconiExpertise
Remote Sensing, LiDAR, Laser Spectroscopy, Photodetectors, Material Science
Simone Bianconi is a postdoctoral scholar at EPFL in the group of Tobias Kippenberg at the Laboratory of Photonics and Quantum Measurements. His research interests focus on leveraging integrated photonics for laser ranging and sensing (e.g. LiDAR).He was previously at the Jet Propulsion Laboratory (Caltech) as a postdoctoral fellow at the Microdevices Laboratory, where he worked on the research and development of innovativ
Alexandre Sébastien Julien WillommetEducation 3D high density memory based on emering resistive technologies : circuit and architecture design | Microelectronics 2014 – 2017 CEA-Leti
Teaching & PhD Courses Fundamentals of VLSI design EE-429 The course introduces the fundamentals of digital integrated circuits and the technology aspects from a designers perspective. It focuses mostly on transistor level, but discusses also the extension to large digital semicustom designs. Lab in advanced VLSI design
Marie Amélie Camille CourtantExpertise
Photovoltaics, advanced crystalline silicon solar cells, perovskite and multi-junction ultra-high efficiency devices, solar module technology and reliability, building integrated photovoltaics, energy systems and storage, specialty detectors with thin and thick film absorber.
Mission
PV‑Lab’s major mission is to advance photovoltaic science, technology, as well as its grid integration, as a cornerstone of the global energy transition, by combining scientific excellence with impactful innovation. A
Maartje Martina Cornelia BastingsExpertise
Can we use structural material properties on the nanoscale to engineer selective interactions at the bio-interface?The goal of the Programmable Biomaterials Lab is to understand the molecular design rules behind selective multivalent interactions at the bio-interface. We use DNA as engineering tool to explore the importance of structural mechanics and precise control of valency and patterns on directional interactions and self-assembly.
Expertise
Can we use structural material properties on the na
