Home

Person

Roland Logé

About
Privacy
Disclaimer

Graph Chatbot

Related publications (133)

Non-isothermal aging of a high-Zn-containing Al-Zn-Mg-Cu alloy: microstructure and mechanical properties

Roland Logé, Saeed Khani Moghanaki, Saeed Nobakht

2018

Morphological and Crystallographic Characteristics of alpha Structure in a Low-Carbon Iron-Nickel Alloy

Cyril Cayron, Roland Logé, Rui Cao, Gaojun Mao

The features of a (body-centered cubic) structures were investigated in a low-carbon multicomponent alloy from morphological and crystallographic perspectives. In addition to apparent features of granular bainite and lamellar martensite, a morphological si ...

2018

On the benefits of a stress criterion for the simulation of cup drawing process

Roland Logé

Experimental and numerical cup drawing process has been investigated on 0.65 mm zinc sheets. The cup exhibits anisotropic earrings due to the material microstructure. The material formability is studied through elliptical bulge tests in the rolling, diagon ...

Springer France2018

The double-edge effect of second-phase particles on the recrystallization behaviour and associated mechanical properties of metallic materials

Roland Logé, Ke Huang

Most industrial alloys contain a matrix phase and dispersed second-phase particles. Several thermomechanical processing (TMP) steps are usually needed to produce a final product, during which recrystallization and its related phenomena may take place. Seco ...

Elsevier2018

Study on Bainite/Martensite Transformation in Reheated Weld Metals

Cyril Cayron, Roland Logé, Rui Cao, Gaojun Mao

A new combination of laser scanning confocal microscope (LSCM) and electron backscattering diffraction (EBSD) with a field-emission scanning electron microscope (SEM) is utilized to study the mechanism of bainite transformation in reheated low carbon baini ...

TRANS TECH PUBLICATIONS LTD2018

Variant Selection in Fe-20Ni-1.8C under Bending

Cyril Cayron, Annick Pauline Baur, Roland Logé

Variant selection is commonly observed in martensitic steels when a stress is applied to the material during transformation. Classically, the selection phenomenon is modelled considering the work of the shape strain in the applied stress field. This shape ...

2018

Competition between intragranular and intergranular deformation mechanisms in ODS ferritic steels during hot deformation at high strain rate

Roland Logé

Oxide Dispersed Strengthened (ODS) ferritic stainless steels present well-known fine grains microstructures where dislocation movement is hindered by a dense precipitation of nano-oxides particles. Previous research, on the thermomechanical behavior at hig ...

Springer Verlag2017

Accounting for material parameters scattering in rolled zinc formability

Roland Logé

This paper focuses on the importance of taking into account scattering of material parameters (zinc in this example) to perform sheet metal forming simulations. The approach described in this paper is efficiently pragmatic to consider as inputs the materia ...

Elsevier Science Sa2017

The flow stress evolution and grain refinement mechanisms during hot deformation of Al-Mg alloy

Roland Logé, Ke Huang

In this study, the hot deformation behavior of an Al-1% Mg alloy with very coarse initial grain size was investigated in terms of flow stress evolution and grain refinement mechanism. The large grain size was employed to study the traditional continuous dy ...

2017

Controlling grain structure and texture in Al-Mn from the competition between precipitation and recrystallization

Roland Logé, Ke Huang

The recrystallization behaviour of Al-Mn alloys (AA3xxx series alloys) is affected by randomly distributed dispersoids present before annealing, by dispersoids precipitated at grain/subgrain boundaries before the onset of recrystallization, and by disperso ...

Elsevier2017

The surprising influence of continuous alternating electric current on recrystallization behaviour of a cold-rolled Aluminium alloy

Cyril Cayron, Roland Logé, Ke Huang

Pronounced acceleration of recrystallization in cold worked metals is generally observed during annealing with additional high density electric current pulses. In this work, continuous alternating current of low density was applied to heat cold-rolled samp ...

Elsevier2017

Method and device for fabrication of 3d multi - material (composite) parts by selective laser melting combined with laser welding and cutting

Roland Logé, Nikola Kalentics

The method of manufacturing objects made of a first primary material such as ceramic, metallic or polymer materials on at least one workstation by selective laser melting (SLM) comprises the addition of at least a secondary material different from the prim ...

2017

Numerical simulation of mechanical deformation of semi-solid material using a level-set based finite element method

Roland Logé

In this work, a level-set based finite element method was used to numerically evaluate the mechanical behavior in a small deformation range of semi-solid materials with different microstructure configurations. For this purpose, a finite element model of th ...

Institute of Physics2017

Tailoring residual stress profile of Selective Laser Melted parts byLaser Shock Peening

Eric Boillat, Roland Logé, Nikola Kalentics

The paper describes a new approach in controlling and tailoring residual stress profile of parts made bySelective Laser Melting (SLM). SLM parts are well known for the high tensile stresses in the as – built statein the surface or subsurface region. These ...

2017

Effect of concurrent precipitation on the texture evolution during continuous heating of multi directionally forged solution treated Al-Cu-Mg alloy

Roland Logé, Saeed Khani Moghanaki

Concurrent precipitation in an age hardenable aluminum alloy determines recrystallization behavior especially grains structure and recrystallization texture during continuous heating. In this study, to investigate the effect of concurrent precipitation on ...

Elsevier Science Inc2017

Heating rate effect on particle stimulated nucleation and grains structure during non-isothermal annealing of multi-directionally forged solution treated AA2024

Roland Logé, Saeed Khani Moghanaki

Particle stimulated nucleation (PSN) is one of the importantmechanisms of recrystallizationwhich is investigated in this research during non-isothermal annealing of multi-directionally forged solution treated aluminum alloy 2024. Non-isothermal annealing i ...

Elsevier Science Inc2017

Hot deformation of a Fe-Mn-Al-C steel susceptible of κ-carbide precipitation

Roland Logé, Oscar Zambrano Zambrano

The mechanical properties of Fe-Mn-Al-C steel are significantly enhanced after κ-carbide precipitation via aging; however, most aging treatments are energy demanding because they require relatively high temperatures and extended holding times. This researc ...

Elsevier Science Sa2017

Method and Device for Implementing Laser Shock Peening or Warm Laser Shock Peening During Selective Laser Melting

Eric Boillat, Roland Logé, Nikola Kalentics

A method for manufacturing an object including the steps of forming layers by adding successive layers of material to form the object by selective laser melting (SLM), and inducing plastic deformation and residual stress into solidified material of at leas ...

2017

In Situ Characterization of Inconel 718 Post-Dynamic Recrystallization within a Scanning Electron Microscope

Roland Logé

Microstructure evolution within the post-dynamic regime following hot deformation was investigated in Inconel 718 samples with different dynamically recrystallized volume fractions and under conditions such that no delta-phase particles were present. In si ...

2017

Variant selection in surface martensite

Cyril Cayron, Annick Pauline Baur, Roland Logé

A significant variant selection is reported in isothermal martensite formed on the surface of an Fe-30% Ni sample. The selection phenomenon is modelled using different descriptions of the martensitic phase transformation. In particular, matrices based on t ...

International Union of Crystallography2017

Page 6 of 7