Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Home

Person

Christian Leinenbach

About
Privacy
Disclaimer

Graph Chatbot

Related publications (62)

Page 2 of 4

Advancing efficiency and reliability in thermal analysis of laser powder-bed fusion

Christian Leinenbach

In laser based powder-bed fusion of metals (PBF-LB/M), parts are fabricated by melting layers of powder using a high-intensity laser beam. During this process, the material is exposed to rapid cooling rates and intense thermal gradients, which are the unde ...

2023

Effect of laser rescanning on the grain microstructure of a selective laser melted Al-Mg-Zr alloy

Christian Leinenbach

The microstructures of alloys created via Additive Manufacturing (AM) can vary substantially from those present in cast or wrought products, due to the very rapid solidification associated with AM. While numerous studies have investigated the process-micro ...

2018

Microstructural and mechanical characterization of steel-copper composite structures fabricated by laser powder bed fusion and induction melting

Christian Leinenbach, Antonios Nikolaos Baganis

Composite structures, coupling properties from different materials, are systematically evaluated, examined with different fabrication processes. In this work, a hybrid fabrication process is proposed for steel-Cu metal-metal composites: Laser Powder Bed Fu ...

ELSEVIER2024

Origin of the enhanced pseudo-elasticity of additively manufactured Fe-17Mn-5Si-4Ni-10Cr-(V, C) shape memory alloy fabricated by laser powder bed fusion

Christian Leinenbach, Irene Ferretto

This study investigated the origin of the enhanced pseudo-elasticity of additively manufactured vanadium carbide-containing Fe-based shape memory alloys. The aged samples with two different starting microstructures, as-built and solution-treated, showed co ...

Elsevier Science Sa2023

Characterization of low-temperature creep and stress relaxation of an iron-based shape memory alloy (Fe-SMA) using in-situ synchrotron diffraction

Christian Leinenbach, Meet Jaydeepkumar Oza

Iron-based shape memory alloys (Fe-SMAs) are e-merging materials with extensive application in civil structures owing to their unique properties, including the shape memory effect. However, it is crucial to understand the time dependent behavior of Fe-SMAs ...

ELSEVIER SCI LTD2024

Microstructure formation in micron-scale thin-walled Hastelloy X samples fabricated with laser powder bed fusion

Christian Leinenbach

Laser powder bed fusion (LPBF) has great potential for the fabricating complex geometries with improved functionality. In combination with nickel alloys such as Hastelloy X, parts produced with this technology find usage in high-temperature applications. M ...

2023

Characterization of the deformation and phase transformation behavior of VC-free and VC-containing FeMnSi-based shape memory alloys by in situ neutron diffraction

Helena Van Swygenhoven, Steven Van Petegem, Christian Leinenbach

The stress-induced fcc-austenite to hcp-martensite transformation in the iron based shape memory alloy (SMA) Fe-17Mn-5Si-10Cr-4Ni with and without VC precipitates is investigated by in-situ neutron diffraction measurements upon uniaxial loading and unloadi ...

Elsevier Science Sa2017

Fabrication of FeMnSi-based shape memory alloy components with graded-microstructures by laser powder bed fusion

Christian Leinenbach, Nicolò Maria Della Ventura

This work demonstrates the tailoring of the microstructure of two FeMnSi-based shape memory alloys during laser powder bed fusion. Significant variations in the microstructure of the parts can be induced by modifying the scanning speed or the scanning stra ...

2023

Experimental study and thermodynamic description of the Au-Cu-Ge system

Christian Leinenbach, Shan Jin

Phase equilibria in the Au-Cu-Ge ternary system, including the solid state phase relations at 450 degrees C as well as four vertical sections, were studied by means of scanning electron microscopy (SEM), electron probe microanalysis (EPMA), X-ray diffracti ...

Elsevier Science Sa2014

Self-Supervised Bayesian representation learning of acoustic emissions from laser powder bed Fusion process for in-situ monitoring

Christian Leinenbach, Sergey Shevchik

This study presents a self-supervised Bayesian Neural Network (BNN) framework using air-borne Acoustic Emission (AE) to identify different Laser Powder Bed Fusion (LPBF) process regimes such as Lack of Fusion, conduction mode, and keyhole without ground-tr ...

Elsevier Sci Ltd2023

Influence of Hf on the heat treatment response of additively manufactured Ni-base superalloy CM247LC

Roland Logé, Christian Leinenbach, Jamasp Jhabvala, Hossein Ghasemi Tabasi, Shreyas Sanjay Joglekar

The influence of Hf on the heat treatment response of a Laser Powder Bed Fusion (L-PBF) fabricated Ni-base superalloy was investigated. A Hf-free version of CM247LC, CM247LC NHf, and CM247LC (similar to 1.4 wt% Hf) were subjected to identical thermal treat ...

ELSEVIER SCIENCE INC2021

3D laser shock peening - A new method for improving fatigue properties of selective laser melted parts

Roland Logé, Christian Leinenbach, Nikola Kalentics, Manuel Ortega Varela De Seijas

Although Selective Laser Melting (SLM) currently revolutionizes the way parts are being manufactured, certain process inherent limitations such as accumulation of residual stresses and increased porosity content can lead to a decrease in fatigue life of pr ...

ELSEVIER2020

Tailored deformation behavior of 304L stainless steel through control of the crystallographic texture with laser-powder bed fusion

Roland Logé, Christian Leinenbach

Laser-powder bed fusion (L-PBF) has gained significant research interest, not only for its profound advantage of producing near-net shape complex geometries of metallic parts, but also for the possibility of producing tailored microstructures. Here we expl ...

ELSEVIER SCI LTD2022

Thermodynamic assessment of the Cu-Ge binary system

Jian Wang, Alain Jacot, Christian Leinenbach, Shan Jin

The Cu-Ge binary system was assessed thermodynamically using the CALPHAD method through Thermocalc (R) software package based on the evaluation of all available experimental data from the published literature. The solution phases, including liquid, fcc, hc ...

Elsevier2010

Nondestructive characterization of laser powder bed fusion parts with neutron Bragg edge imaging

Roland Logé, Christian Leinenbach, Nikola Kalentics

Laser powder bed fusion is an efficient technique for additive manufacturing of metallic materials. The quality of the material produced depends on the optimization of a large range of build parameters and the complex thermo-mechanical build process is pro ...

ELSEVIER2021

Experimental investigation and thermodynamic modeling of the Au-Ge-Ni system

Christian Leinenbach, Shan Jin

Phase equilibria in the Au-Ge-Ni ternary system were studied by means of scanning electron microscopy, electron probe microanalysis, X-ray diffraction, and differential scanning calorimetry. The phase relations in the solid state at 600 A degrees C as well ...

Springer Wien2012

A simple scaling model for balling defect formation during laser powder bed fusion

Christian Leinenbach

Balling is one of the cornerstone defects in laser powder bed fusion of metals, leading to high porosity of the 3D printed parts and substantially deteriorating their performance. The transition to the balling mode is commonly identified through a series o ...

2023

Evaluation of Interface and Residual Strain of NiTi Layer Deposited on NiTiX Substrate by Laser Powder Bed Fusion

Elyas Ghafoori, Christian Leinenbach, Irene Ferretto

This study investigates the microstructure and properties of functionally graded NiTi alloy bilayers. The NiTi layer is printed by laser powder bed fusion on a NiTiX (where X is Hf or Cu) substrate prepared by vacuum arc remelting. Specimens produced with ...

Wiley-V C H Verlag Gmbh2024

Influence of thermomechanical treatment on the shape memory effect and pseudoelasticity behavior of conventional and additive manufactured Fe-Mn-Si-Cr-Ni-(V,C) shape memory alloys

Christian Leinenbach

This study evaluated the influence of heat treatment and thermomechanical training on the microstructural evolution and mechanical characteristics of conventional and additive-manufactured FeMnSi-based shape memory alloys. The conventional samples were pro ...

2023

Combining alloy and process modification for micro-crack mitigation in an additively manufactured Ni-base superalloy

Roland Logé, Christian Leinenbach, Jamasp Jhabvala, Xavier Maeder, Hossein Ghasemi Tabasi, Toni Ivas

The additive manufacturing (AM) of the gamma' precipitation strengthened Ni-base superalloys still remains a challenge due to their susceptibility to micro-cracking. Post-processing, such as HIPing, has been shown to heal the micro-cracks but it remains de ...

ELSEVIER2020