Publications by Alexis Boegli | EPFL Graph Search

Related publications (22)

Ultra-High-Voltage (7-kV) Bidirectional Flyback Converter Used to Drive Capacitive Actuators

Yves Perriard, Alexis Boegli, Morgan Almanza, Raphaël Johannes Charles Mottet

Dielectric elastomer actuators (DEAs) have extremely advantageous characteristics such as lightness, compactness, flexibility, and large displacements. However, in order to operate, they can require voltages in the order of several thousands of volts. Thus ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2021

Depth Camera and Electromagnetic Field Localization System For IoT Application - High level, lightweight data fusion

Yves Perriard, Alexis Boegli, Pooneh Mohaghegh

This article demonstrates person localization using a hybrid system consisting of an electromagnetic positioning system and a depth camera to authorize access control. The ultimate aim of this system is to distinguish moving people in a defined area by tra ...

Association for Computing Machinery2021

Bluetooth Low Energy Direction Finding Principle

Yves Perriard, Alexis Boegli, Pooneh Mohaghegh

The ubiquitous implementation of 5G networks and the Internet of Things (IoT), brings about the importance of indoor localization. Even though Global Positioning System (GPS) provides an efficient outdoor Positioning System (PS), indoor positioning techniq ...

IEEE2021

Electric Charge Transfer Between Cascading Dielectric Electroactive Polymer Actuators

Yves Perriard, Alexis Boegli, Jonathan André Jean-Marie Chavanne, Raphaël Johannes Charles Mottet

With the never slowing interest in dielectric electroactive polymer (DEAP) actuators for medical applications, the need to optimize the management of the driving energy of these actuators becomes evermore important. In order to tackle the problematic of th ...

2018

Method of real-time regulation compliance for wireless transmitters

Pierre-André Farine, Alexis Boegli, Mitko Tanevski

All wireless devices must comply with the local radio regulations which are set by international and national regulatory bodies such as the European Telecommunication Standardization Institute (ETSI) for Europe and the Federal Commission for Communication ...

2015

New Design of Antenna Array for Bluetooth Direction Finding

Yves Perriard, Alexis Boegli, Pooneh Mohaghegh

Bluetooth Low Energy (BLE) has become very common for tracking applications in homes, stadiums, malls, and hospitals over the last decade. With the outbreak of COVID, the technology was widely used for local tracking of the virus spread [1]. However, despi ...

IEEE2022

Inversing the actuation cycle of dielectric elastomer actuators for a facial prosthesis

Yves Perriard, Yoan René Cyrille Civet, Paolo Germano, Thomas Guillaume Martinez, Stefania Maria Aliki Konstantinidi, Alexis Boegli, Quentin Philippe Mario De Menech

Dielectric Elastomer Actuators (DEAs) are a type of smart material described as compliant capacitors. They show impressive performances as soft actuators, such as a high strain and fast response. Nonetheless, replicating natural muscle function with DEAs h ...

Society of Photo-Optical Instrumentation Engineers (SPIE)2024

Design of an integrated thermoelectric generator power converter for ultra-low power and low voltage body energy harvesters aimed at ExG active electrodes

Pierre-André Farine, Alexis Boegli, Christian Robert, Milad Ataei Ashtiani

This paper describes a detailed design procedure for an efficient thermal body energy harvesting integrated power converter. The procedure is based on the examination of power loss and power transfer in a converter for a self-powered medical device. The ef ...

Institute of Physics2015

Power supply energy optimization for ultra low-power wireless sensor nodes

Pierre-André Farine, Alexis Boegli, Mitko Tanevski

The wireless sensor nodes are most energy-efficient when they operate at the minimal operating voltage. The nominal voltage of the batteries used is often significantly higher. This paper analyzes DC-DC power conversion from the point of view of ultra low- ...

IEEE Instrumentation and Measurement Society2013

Piezoelectric Actuators Characterization

Hind Klinke, Pierre-André Farine, Alexis Boegli, Christian Robert, Patrick Stadelmann

This paper describes a system to drive piezoelectric actuators over more than one decade of voltages and one octave of frequencies, in order to perform high-speed complex impedance characterization at a user chosen voltage excitation level. This characteri ...

Ieee Computer Soc2012

An Analytical Model for the Prediction of the Maximum Output Voltage Reachable with an Ultra-high Voltage Flyback Converter Driving Capacitive Actuators

Yves Perriard, Alexis Boegli, Raphaël Johannes Charles Mottet

The DC-DC flyback converter is one of the most suitable topologies to generate the voltages necessary to operate Dielectric Elastomer Actuators. Voltages which can range from 5 to 20 kV. Previous works demonstrated through experiments the flyback’s ability ...

IEEE2021

Control Strategy for the Discharge Phase of an Ultra-High Voltage (>7kV) Bi-Directional Flyback Converter Driving Capacitive Actuators

Yves Perriard, Alexis Boegli, Raphaël Johannes Charles Mottet

Dielectric Elastomer Actuators (DEAs) require ultra high voltages in the order of several kilo volts to operate. To supply such voltages, a DC-DC flyback converter topology was selected. One of the main advantage of using such a structure is the possibilit ...

IEEE2020

Schmitt trigger-based control strategy for the discharge phase of an ultra-high-voltage bidirectional flyback

Yves Perriard, Alexis Boegli, Raphaël Johannes Charles Mottet

The control strategy to discharge a capacitive load such as a dielectric elastomer actuator charged to several kilo-volts is critical to obtain a safe and reliable actuation. In the case of this publication, an ultra-high voltage bidirectional flyback conv ...

IEEE2021

RoSe: A sub-GHz wireless sensor platform with housing integrated overmolded antenna

Anja Skrivervik, Jean-François Zürcher, Pierre-André Farine, Francesco Merli, Alexis Boegli, Mitko Tanevski

A wireless sensor platform for use in ultralow-power wireless sensor networks (WSNs) is presented. The proposed round sensor (RoSe) node is physically robust, is resistant to humidity, and has a housing that can be in direct contact with food. These charac ...

Institute of Electrical and Electronics Engineers2012

Critical Parasitic Elements of Coupled Inductors for Ultra-High Voltage Flyback Converters Used to Drive Capacitive Actuators

Yves Perriard, Alexis Boegli, Morgan Almanza, Raphaël Johannes Charles Mottet

This paper presents the critical parasitic elements of coupled inductors and their influence when designing a low input (12V) and ultra-high output voltage (>4000V) DC-DC Flyback Converter. The aim is to design a compact converter capable to supply the ult ...

IEEE2019

Phase and frequency self-configurable efficient low voltage harvester for zero power wearable devices

Pierre-André Farine, Alexis Boegli, Milad Ataei Ashtiani

This paper describes a converter which configures itself to increase power transfer and decrease losses. The system controls its three timing variables by three loops in a stable manner. A time domain state-space averaging model is used to design the syste ...

Ieee2016

Monitoring and troubleshooting wireless sensor nodes by measuring the supply current waveform

Pierre-André Farine, Alexis Boegli, Mitko Tanevski

A troubleshooting method for debugging wireless sensor nodes using measurements of the supply current waveform and logic outputs is presented. The troubleshooting and debugging technique uses the supply current waveform in conjunction with the measurement ...

Elsevier Ltd.2010

Design of an Integrated Thermoelectric Generator Power Converter for Ultra-Low Power and Low Voltage Body Energy Harvesters aimed at EEG/ECG Active Electrodes

Pierre-André Farine, Alexis Boegli, Christian Robert, Milad Ataei Ashtiani

This paper describes a design procedure for an efficient body thermal energy harvesting integrated power converter. This procedure is based on loss examination for a self-powered medical device. All optimum system parameters are calculated respecting the t ...

Iop Publishing Ltd2014

Robust ultra low power wireless sensor platform with embedded over-molded antenna

Anja Skrivervik, Jean-François Zürcher, Pierre-André Farine, Francesco Merli, Alexis Boegli, Mitko Tanevski

In this paper a new wireless sensor node intended for use in ultra-low power Wireless Sensor Networks (WSN) is presented. The node uses commercial of-the-shelf radio, microcontroller and a custom developed antenna embedded in the housing. Over-molding with ...

IEEE Instrumentation and Measurement Society2011

Firmware for ensuring realtime radio regulations compliance in WSN

Pierre-André Farine, Alexis Boegli, Mitko Tanevski

All wireless devices must comply with the local radio regulations which are set by international and national regulatory bodies such as the European Telecommunication Standardization Institute (ETSI) for Europe and the Federal Commission for Communication ...

IEEE Computer Society2012