Publications by Danick Briand | EPFL Graph Search

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Advancing 3D printing fabrication methodologies can enable customized wearables and robotic sensing systems with novel sensing architectures, tuned mechanical properties, and higher feature density. In this work, a design and fabrication approach is develo ...

This paper presents experimentally-verified multiphysics finite element model of a wideband vibration energy harvester with impact coupling, which operates on the principle of frequency up-conversion: under low-frequency harmonic base excitation a cantilev ...

This works describes the fabrication process of an array of printed MEMS microbridges on polymeric foil, performed in only four easy steps. Each functional material was deposited exclusively by inkjet-printing technique, compatible with large-area fabricat ...

This dataset contains the data collected during the SNSF BRIDGE GREENsPACK project (Grant no. 187223) in association with the recent publication entitled “Design optimization of a phase-change capacitive sensor for irreversible temperature threshold monito ...

The strong clinical demand for more accurate and personalized health monitoring technologies has called for the development of additively manufactured wearable devices. While the materials palette for additive manufacturing continues to expand, the integra ...

This paper presents a new fabrication method to manufacture alkali reference cells having dimensions larger than standard micromachined cells and smaller than glass-blown ones, for use in compact atomic devices such as vapour-cell atomic clocks or magnetom ...

This data set contains the data collected during the FNS project Green Piezo (Grant no. 179064) in association with the publication entitled “Organic Electrochemical Transistors Printed from Degradable Materials as Disposable Biochemical Sensors”. This wor ...

A polymeric-based colorimetric gas sensor with its associated electronics targeting ammonia detectionat low-cost and low-power is presented. The gas sensitive layer was inkjet printed on a plastic foil used as an optical waveguide. The planarconfiguration ...

This paper demonstrates a novel methodology using a rotational flywheel to determine the energy conversion efficiency of the impact based piezoelectric energy harvesters. The influence of the impact speed and additional proof mass on the efficiency is pres ...

In this review paper, we summarise the status and trends in the research and development of printed sensors on foil substrates. Our focus includes sensor technologies that have some of their elements printed with a special interest for fully printed struct ...

Future space exploration will emphasize on cost effectiveness and highly focused mission objectives. Missions costs are directly proportional to its total weight, thus, the trend will be to replace bulky and heavy components of space carriers, communicatio ...

We report on organic electrochemical transistors (OECTs) with active channels made of hybrid inkjet-printed poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) and electropolymerized polyaniline (PANI) layers, exhibiting simultaneously impro ...

This paper presents the optimization of a micro gas preconcentrator based on a micro-channel in porous and non-porous silicon filled with an adequate adsorbent. This micro gas preconcentrator is both applicable in the fields of atmospheric pollution monito ...

Electronic waste has become a pressing issue, necessitating sustainable solutions for the disposal of electronic devices. While the development of environmentally degradable electronics has gained attention, the fabrication of stable and performant sensors ...

A device for energy harvesting from an impact by using a piezoelectric MEMS harvester comprising at least a gear (1) driven by an inertial mass system and a piezoelectric transducer (2) located over the gear in order to keep the system as compact as possib ...

This paper presents the optimization of a micro gas preconcentrator (mu-GP) system applied to atmospheric pollution monitoring, with the help of a complete modeling of the preconcentration cycle. Two different approaches based on kinetic equations are used ...

The evaluation of colorimetric films for the detection of low concentrations of gaseous ammonia in a waveguide configuration is presented. They were composed of a pH indicator selective to NH3 embedded in a polymeric matrix and deposited on an optical wave ...

This paper presents the development of a compact energy harvesting configuration to convert low frequency, mechanical oscillations into usable electrical energy using AFM-like MEMS piezoelectric cantilevers coupled to a rotating gear. In this approach, one ...

This paper presents the design and implementation of a foil gas preconcentrator (FGP) based on a gold micro-hotplate inkjet printed on a polyimide (PI) substrate. The device is made on flexible foil using printing whereas all preconcentrators seen in liter ...

This paper presents a novel process for screen printed electrode fabrication, functionalization and integration in a polyethylene terephthalate (PET) fluidics system for electrochemical analysis. The innovative components utilized are: 1. 3D Through-Foil V ...

Danick Briand

Chat with Graph Search

Fully 3D Printed Capacitive Bending Sensor Enabled by 3D Structuring

Multiphysics finite element model of a frequency-amplifying piezoelectric energy harvester with impact coupling for low-frequency vibrations

Large Arrays Of Inkjet-Printed Mems Microbridges On Foil

Dataset for "Design optimization of a phase-change capacitive sensor for irreversible temperature threshold monitoring and its eco-friendly and wireless implementation"

Digital manufacturing of personalised footwear with embedded sensors

Microfabricated rubidium vapour cell with a thick glass core for small-scale atomic clock applications

Dataset for 'Organic Electrochemical Transistors Printed from Degradable Materials as Disposable Biochemical Sensors'

Inkjet printed colorimetric ammonia sensor on plastic foil for low-cost and low-power devices

On the experimental determination of the efficiency of piezoelectric impact-type energy harvesters using a rotational flywheel

Recent Advances in Printed Sensors on Foil

MEMS for space

Thin film organic electrochemical transistors based on hybrid PANI/PEDOT:PSS active layers for enhanced pH sensing

A micro gas preconcentrator with improved performance for pollution monitoring and explosives detection

Printed ecoresorbable temperature sensors for environmental monitoring

Energy scavenging from a rotating gear using an impact type piezoelectric mems scavenger

Preconcentration Modeling for the Optimization of a Micro Gas Preconcentrator Applied to Environmental Monitoring

Evaluation of pH indicator-based colorimetric films for ammonia detection using optical waveguides

On The Optimization And Performances Of A Compact Piezoelectric Impact Mems Energy Harvester

Tubular gas preconcentrators based on inkjet printed micro-hotplates on foil

3D-Integration Of Printed Electrochemical Sensors In Pet Microfluidics For Biochemical Sensing