Publications by Stéphane Fierro

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Iridium dioxide electrodes form part of the dimensionally stable anodes (DSA®) and this electrode material is widely used in many industrial processes namely water electrolysis, metal electro-winning, cathodic protection and electro-organic synthesis due t ...

The electrochemical oxidation of acidic solutions of phenol on a Ti/IrO2 anode has been investigated by cyclic voltammetry and bulk electrolysis in a single-compartment cell. In the potential region of oxygen evolution, anodic oxidation resulted in electro ...

The influence of the boron doping level in boron doped diamond electrodes (BDD) on the electro-generation of active intermediates (hydroxyl radicals and hydrogen peroxide) involved in the oxidation of organic compounds has been studied. It is shown that th ...

The boron doped diamond (BDD) electrode is presented as an appropriate candidate for next generation glass-free, highly stable and accurate pH sensors. The method used in this study is based on the potential change related to the hydrogen evolution reactio ...

The surface redox activities, the oxygen evolution reaction (OER), the oxidation of formic acid (FA) and the anodic stability have been investigated and compared on IrO2 electrodes prepared by two techniques: the thermal decomposition of H2IrCl6 precursor ...

In this paper, the IrO2 electrode preparation technique consisting in thermal treatment of pure Ir in air was used in order to produce an IrO2-based microelectrode-array (TOIROF-MEA) with low capacitive background current. The TOIROF-MEA was characterized ...

Molybdenum sulfide materials had been shown as promising non-precious catalysts for hydrogen evolution. This paper describes the study of the promotional effect of certain transition metal ions on the activity of amorphous MoS3 films. Ternary metal sulfide ...

The electrochemical oxidation of ammonia (NH4+/NH3) in sodium perchlorate was investigated on IrO2 electrodes prepared by two techniques: the thermal decomposition of H2IrCl6 precursor and the anodic oxidation of metallic iridium. The electrochemical behaviour of Ir(IV)/Ir(111) surface redox couple differs between the electrodes indicating that on the anodic iridium oxide film (AIROF) both, the surface and the interior of the electrode are electrochemically active whereas on the thermally decomposed iridium

The electrochemical behaviour of ammonia (NH4+/NH3) in sodium perchlorate at pH 9 has been investigated on electrochemically grown anodic iridium oxide film (AIROF) electrode. In base electrolyte at pH 9, the Ir(IV)/Ir(III) surface redox couple exhibits un ...

Surface redox activities, oxygen evolution reaction (OER), oxidation of formic acid (FA), and anodic stability were investigated and compared for IrO2 electrodes prepared by two techniques: the thermal decomposition of H2IrCl6 precursor (TDIROF) and the an ...

Amorphous molybdenum sulfide films are efficient hydrogen evolution catalysts in water. The films are prepared via simple electro-polymerization procedures and are characterized by XPS, electron microscopy and electronic absorption spectroscopy. Whereas th ...

In the first part of this paper, IrO2 electrodes produced by thermal decomposition of H2IrCl6 precursor were manufactured using the spin coating deposition technique, where centrifugal forces spread the precursor solution with simultaneous evaporation of t ...

Individual and simultaneous electrochemical detection of iodide and iodine has been performed via cyclic voltammetry on boron doped diamond (SOD) electrodes in a 1 M NaClO4 (pH 8) solution, representative of typical environmental water conditions. It is fe ...

Stéphane Fierro

Chat with Graph Search

Electrocatalysis induced by surface redox activities on conductive metal oxide electrodes

Anodic oxidation of phenol on Ti/IrO2 electrode: Experimental studies

Influence of Doping Level on the Electrochemical Oxidation of Formic Acid on Boron Doped Diamond Electrodes

pH sensing using boron doped diamond electrodes

Electrochemical comparison between IrO2 prepared by thermal treatment of iridium metal and IrO2 prepared by thermal decomposition of H2IrCl6 solution

Microelectrode-array of IrO2 prepared by thermal treatment of pure Ir

Fe, Co, and Ni Ions Promote the Catalytic Activity of Amorphous Molybdenum Sulfide Films for Hydrogen Evolution

Electrochemical oxidation of ammonia (NH4+/NH3) on thermally and electrochemically prepared IrO2 electrodes

Electrochemical behaviour of ammonia (NH4+/NH3) on electrochemically grown anodic iridium oxide film (AIROF) electrode

Electrochemical comparison between IrO2 prepared by anodic oxidation of pure iridium and IrO2 prepared by thermal decomposition of H2IrC16 precursor solution

Amorphous Molybdenum Sulfide Films as Catalysts for Electrochemical Hydrogen Production in Water

Investigation of formic acid oxidation on Ti/IrO2 electrodes

Kinetic study of formic acid oxidation on Ti/IrO2 electrodes prepared using the spin coating deposition technique

Simultaneous detection of iodine and iodide on boron doped diamond electrodes

Influence of temperature on the charging/discharging process of IrO2 coating deposited on p-Si substrate

Investigation of the oxygen evolution reaction on Ti/IrO2 electrodes using isotope labeling and on-line mass spectrometry

Investigation of formic acid oxidation on Ti/IrO2 electrodes using isotope labeling and online mass spectrometry

Pseudo-potentiostatic electrolysis by potential buffering induced by the oxygen evolution reaction

Electrochemical Oxidation of Organic Compounds in Aqueous Acidic Media on "Active" and "Non-Active" Type Electrodes