Henning Paul-Julius StahlbergMission
We use high-resolution cryo-electron microscopy to study neurodegeneration and other protein systems. We also develop novel imaging technology in the areas of electron microscopy hardware and applications, sample preparation, data collection schemes, and data analysis software systems. The Stahlberg group is supported by the University of Lausanne, Faculty of Medicine and Biology, and by the EPFL, Faculty of Basic Sciences, Physics Institute. The LBEM is a research laboratory of both UNIL and EPFL.
Niels QuackProf. Dr. Niels Quack received the M.Sc. degree from Ecole Polytechnique Fédérale de Lausanne (EPFL), Lausanne, Switzerland, in 2005, and the Dr.Sc. degree from Eidgenössische Technische Hochschule Zürich (ETH), Zürich, Switzerland, in 2010. From 2011 to 2015, he was Postdoctoral Researcher and Visiting Scholar with the Integrated Photonics Laboratory, Berkeley Sensor and Actuator Center, University of California, Berkeley, CA, USA. From 2014 to 2015, he was Senior MEMS Engineer with Sercalo Microtechnology, Neuchâtel, Switzerland. He is currently an SNSF Assistant Professor with Ecole Polytechnique Fédérale de Lausanne (EPFL), Lausanne, Switzerland. He has authored and co-authored more than 50 papers in leading technical journals and conferences. His research interests include photonic micro and nanosystems, with an emphasis on diamond photonics and silicon photonic MEMS. He is Steering Committee Member of the IEEE International Conference on Optical MEMS and Nanophotonics (OMN) and served as General Chair of the IEEE OMN 2018 and the Latsis Symposium 2019 on Diamond Photonics. He is a Senior Member of IEEE, Member of The Optical Society (OSA) and life member of SPIE.
Mounir Driss MensiTeaching & PhD Courses Advanced Solid State and Surface Characterization CH-633 State-of-the-art surface/thin film characterization methods of polycrystalline/nano/amorphous materials. Selected topics from X-ray scattering (SAXS/GISAXS, PDF, GIWAXS, HRXRD), electronic and optical spectroscopy (XPS, AES, SERS, TERS), scanning probe and electron microscopy (STM, AFM, HRTEM, SEM). Characterization of Materials 2025 MSE-716 This course introduces materials characterization techni
Mihai Adrian IonescuAdrian M. Ionescu is Full Professor at the Swiss Federal Institute of Technology, Lausanne, Switzerland. He received the B.S./M.S. and Ph.D. degrees from the Polytechnic Institute of Bucharest, Romania and the National Polytechnic Institute of Grenoble, France, in 1989 and 1997, respectively. He has held staff and/or visiting positions at LETI-CEA, Grenoble, France and INP Grenoble, France and Stanford University, USA, in 1998 and 1999. Dr. Ionescu has published more than 600 articles in international journals and conferences. He received many Best Paper Awards in international conferences, the Annual Award of the Technical Section of the Romanian Academy of Sciences in 1994 and the Blondel Medal in 2009 for contributions to the progress in engineering sciences in the domain of electronics. He is the 2013 recipient of the IBM Faculty Award in Engineering. He served the IEDM and VLSI conference technical committees and was the Technical Program Committee (Co)Chair of ESSDERC in 2006 and 2013. He is a member of the SATW. He is director of the Laboratory of Micro/Nanoelectronic Devices (NANOLAB).
Alain NussbaumerExpertise
Metallic structuresStructural glassFatigue and fracture mechanicsAssessment of existing structuresUltra low cycle
Teaching & PhD Past EPFL PhD Students Luís Costa Borges, Claire Acevedo, Nariman Maddah, Farshid Zamiri Akhlaghi, Manuel Santarsiero, Luca D'Angelo, Cláudio Alexandre Pereira Baptista, Albano António Sousa, Jagoda Cupac, Ardalan Hosseini, Martin Garcia, Hossein Heydarinouri, Jian Zhan Past EPFL PhD Students as codirector Marina Rocha Courses Design of steel structures CIVIL-2
Jan Van HerleBorn in Antwerp, Belgium. In Switzerland since 1983. Became Swiss citizen in 2004 out of conviction of principles of democracy and bottom-up participation. No double nationality. Village Council Member for 2 five-year mandates in 2006-2016.
1987 : Chemist from Basel University (CH).
1988 : Post-graduate IT diploma from Basel Engineering School.
1989 : Industry internship ABB Baden (CH).
1990-1993 : PhD Thesis EPFL, on Solid Oxide Fuel Cell cathode reaction mechanisms.
1994-1995 : Japanese Postdoctoral Fellowship in Tsukuba, Japan, on ceramic powders.
1995-2000 : Researcher at EPFL, Dpt. Chemistry : project responsible in PPM2 (materials), FP4-BriteEuram, NEDO (Japan), Swiss Gas Union (CH, oxygen membranes).
1998-2000 : Masters in Energy Technology, EPFL.
2000 : Cofounder of HTceramix SA (EPFL spin-off), now based in Yverdon (14 employees). Taken over by SOLIDpower in 2007, now 250 employees with 70 MCHF raised.
2000 : 1st Assistant and lecturer at LENI (STI-IGM) : fuel cell group responsible, projects on biogas (Federal Energy Office), woodgas (CCEM), fuel cell stacking (CTI, FP6, FNS), ceramic separation membranes (COST, FNS), microtubes (STI Seed), stability/lifetime/reliability in fuel cells (Electricité de France, swisselectric research). Currently 4 Ph D theses ongoing, 14 theses concluded, of which 5 colateral with SB and IMX. M.E.R. since Nov 2008.
Total funding raised so far >18 MCHF (50% as main applicant; 30% outside CH; 20% industry).
Scientific output : >135 peer-reviewed publications, >120 conference papers, 40 invited presentations (8 keynotes), >70 granted proposals.
Fluent in 5 languages (Dutch, French, German ( Swiss-german), English, Spanish).
Stefano MischlerStefano Mischler obtained the diploma in materials science in 1983 at the Swiss Federal Institute of Technology ETHZ in Zurich. He accomplished his PhD thesis in the field of surface analysis and corrosion at the Materials department of the Swiss Federal Institute of Technology EPFL in Lausanne in 1988. In the years 1989-1990 he held a postdoctoral position at the United Kingdom Atomic Energy Establishment in Harwell (Oxfordshire) where he developed novel quantification procedures for Auger Electron Spectroscopy and high lateral resolution surface analytical methods for fiber reinforced ceramics. In 1991 he joined the newly created Tribology group at the Laboratory for Metallurgical Chemistry of the EPFL where he developed research activities in the field of wear-corrosion interactions (tribocorrosion) and of tribological coatings. He is currently head of the tribology group and is developing a reserach and training activity devoted to modern aspects of tribology and surface science and technology, including surface chemical effects in tribology, biotribology and biocorrosion, tribology in microfabrication processes and wear protection methods. In 2006 he spent a sabbatical leave of 3 months at the Tokyo Medical and Dental University, Institute of Biomaterials.
Cécile HébertCécile Hébert was born in France in 1970. She obtained her Ingeneer degree (physics) and her PhD degree (design of a new energy filter for transmission electron microscopy, under the direction of Prof. B. Jouffrey) at the Ecole Centrale in Paris.
As a post doc with Prof. P. Schattschneider, she was working on the calculation of the fine structure of ionisation edges in EELS. As a research assistant at the Vienna University of Technology, she was one of the main participant to the CHIRALTEM project dealing with the measurement of magnetic circular dichroism in the electron microscope.
Edoardo CharbonEdoardo Charbon (SM’00 F’17) received the Elektrotechnik Diploma from ETH Zurich, the M.S. from the University of California at San Diego, and the Ph.D. from the University of California at Berkeley in 1988, 1991, and 1995, respectively, all in electrical engineering and EECS. He has consulted with numerous organizations, including Bosch, X-Fab, Texas Instruments, Maxim, Sony, Agilent, and the Carlyle Group. He was with Cadence Design Systems from 1995 to 2000, where he was the architect of the company's initiative on information hiding for intellectual property protection. In 2000, he joined Canesta Inc., as the Chief Architect, where he led the development of wireless 3-D CMOS image sensors. Since 2002 he has been a member of the faculty of EPFL, where is a full professor since 2015. From 2008 to 2016 he was full professor and chair at the Delft University of Technology, where he spearheaded the university's effort on cryogenic electronics for quantum computing as part of QuTech. He has been the driving force behind the creation of deep-submicron CMOS SPAD technology, which is mass-produced since 2015 and is present in smartphones, telemeters, proximity sensors, and medical diagnostics tools. His interests span from 3-D vision, LiDAR, FLIM, FCS, NIROT to super-resolution microscopy, time-resolved Raman spectroscopy, and cryo-CMOS circuits and systems for quantum computing. He has authored or co-authored over 400 papers and two books, and he holds 23 patents. Dr. Charbon is a distinguished visiting scholar of the W. M. Keck Institute for Space at Caltech, a fellow of the Kavli Institute of Nanoscience Delft, a distinguished lecturer of the IEEE Photonics Society, and a fellow of the IEEE.
John BotsisJohn (Ioannis) Botsis obtained his diplôme in civil engineering at the University of Patras, Greece in 1979. He continued his education at Case Institute of Technology in Cleveland Ohio/USA, where he received his MS and Ph.D. in 1984. After two years at the research center for national defense in Athens he was nominated assistant professor at the University of Illinois in Chicago, associate in 1991 and full professor in 1995. In 1996, he was nominated professor of solids and structural mechanics at the EPFL. At EPFL he teaches mechanics of structures and mechanics of continuous media´ at the bachelors level and Fracture mechanics at the masters and doctoral levels. His research covers the mechanics of solids and structures, fracture mechanics and micromechanics of polymers, metals and their composites as well as biomechanics. He is also actively involved in full-filed optical methods for surface strain measurements as well as internal strain measurements using fiber Bragg grating sensors, aimed at characterizing micromechanics of fracture, residual strains and strain distribution in composite laminates for structural monitoring. Funding for his research comes from the Swiss National Science Foundation, State Secretariat for Education and Research and Swiss industry. He retired on February 28, 2020.
Nicolas GrandjeanNicolas Grandjean received a PhD degree in physics from the University ofNice Sophia Antipolis in 1994 and shortly thereafter joined the French National Center for Scientific Research (CNRS) as a permanent staff member. In 2004, he was appointed tenure-track assistant professor at the École polytechnique fédérale de Lausanne (EPFL) where he created the Laboratory for advanced semiconductors for photonics and electronics. He was promoted to full professor in 2009. He was the director of the Institute of Condensed Matter Physics from 2012 to 2016 and then moved to the University of California at Santa Barbara where he spent 6 months as a visiting professor. Since 2018, he is the head of the School of Physics at the EPFL. He was awarded the Sandoz Family Foundation Grant for Academic Promotion, received the “Nakamura Lecturer” Award in 2010, the "Quantum Devices Award” at the 2017 Compound Semiconductor Week, and “2016 best teacher” award from the EPFL Physics School. His research interests are focused on the physics of nanostructures and III-V nitride semiconductor quantum photonics.
