Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Lecture

Transistor Bipolar Modeling: Small Signal Linear Model

Description

This lecture covers the small signal linear model of a bipolar transistor in operation, focusing on the linearization around a point of DC operation and the transistor's conduction. It explains the small signals regime, the AC model, and the equivalent diagram.

In MOOC

Electronics II

Official source

Ontological neighbourhood

Physics

Condensed matter physics: Solid-state physics

Related concepts (32)

Transistor

A transistor is a semiconductor device used to amplify or switch electrical signals and power. It is one of the basic building blocks of modern electronics. It is composed of semiconductor material, usually with at least three terminals for connection to an electronic circuit. A voltage or current applied to one pair of the transistor's terminals controls the current through another pair of terminals. Because the controlled (output) power can be higher than the controlling (input) power, a transistor can amplify a signal.

Bipolar junction transistor

A bipolar junction transistor (BJT) is a type of transistor that uses both electrons and electron holes as charge carriers. In contrast, a unipolar transistor, such as a field-effect transistor (FET), uses only one kind of charge carrier. A bipolar transistor allows a small current injected at one of its terminals to control a much larger current flowing between the terminals, making the device capable of amplification or switching. BJTs use two p–n junctions between two semiconductor types, n-type and p-type, which are regions in a single crystal of material.

Field-effect transistor

The field-effect transistor (FET) is a type of transistor that uses an electric field to control the flow of current in a semiconductor. FETs (JFETs or MOSFETs) are devices with three terminals: source, gate, and drain. FETs control the flow of current by the application of a voltage to the gate, which in turn alters the conductivity between the drain and source. FETs are also known as unipolar transistors since they involve single-carrier-type operation.

History of the transistor

A transistor is a semiconductor device with at least three terminals for connection to an electric circuit. In the common case, the third terminal controls the flow of current between the other two terminals. This can be used for amplification, as in the case of a radio receiver, or for rapid switching, as in the case of digital circuits. The transistor replaced the vacuum-tube triode, also called a (thermionic) valve, which was much larger in size and used significantly more power to operate.

Small-signal model

Small-signal modeling is a common analysis technique in electronics engineering used to approximate the behavior of electronic circuits containing nonlinear devices with linear equations. It is applicable to electronic circuits in which the AC signals (i.e., the time-varying currents and voltages in the circuit) are small relative to the DC bias currents and voltages. A small-signal model is an AC equivalent circuit in which the nonlinear circuit elements are replaced by linear elements whose values are given by the first-order (linear) approximation of their characteristic curve near the bias point.

Related lectures (32)

Transistor Bipolar: Introduction MOOC: Electronics II

Covers the electrical specifications and characteristics of bipolar transistors in different configurations.

Transistor Bipolar Modeling: Application Examples MOOC: Electronics II

Explores small signal models of bipolar transistors with application examples and discusses gain in voltage, Early effect, and temperature behavior.

Transistor Bipolaire: Summary and Examples MOOC: Electronics II

Covers the large signal equivalent diagrams of bipolar transistors in normal and saturation modes.

Analog CMOS Integrated Circuits: Fundamentals

Covers the fundamentals of analog CMOS integrated circuits, emphasizing transistor-level design principles and the historical impact of CMOS technology.

The Transistor: An Invention of First Plan