Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Lecture

Mechanical Properties and Deformation Analysis

In course

MSE-310: Deformation of materials

Présentation des mécanismes de déformation des matériaux inorganiques: élasticité, plasticité, fluage. ...

Description

This lecture covers the measurement of mechanical properties essential for structural design, including hardness, deformation, and mechanical tests. It delves into the relationship between properties and microstructures, discussing tensile, compression, bending, and torsion tests. The lecture also explores the concepts of elasticity, plasticity, ductility, and the behavior of materials under different deformation conditions. It addresses the factors influencing mechanical behavior, such as strain rate, temperature, and the role of dislocations and grain size. Additionally, it examines the significance of nominal and true values in material testing, the impact of work hardening on necking, and the trade-off between hardness and ductility in materials.

This video is available exclusively on Mediaspace for a restricted audience. Please log in to MediaSpace to access it if you have the necessary permissions.

Watch on Mediaspace

Instructor

Roland Logé

Roland Logé is an associate professor at EPFL, with a primary affiliation to the Materials Institute, and a secondary affiliation to the Microengineering Institute. After graduating in 1994 at UCL (Belgium) in Materials Engineering, he earned a Master of Science in Mechanics in 1995, at UCSB Santa Barbara (USA). He received his PhD at Mines Paristech-CEMEF (France) in 1999, where he specialized in metal forming and associated microstructure evolutions. After a postdoc at Cornell University (USA) between 1999 and 2001, he entered CNRS in France. In 2008, he was awarded the ALCAN prize from the French Academy of Sciences, together with Yvan Chastel. In 2009 he became head of the Metallurgy-Structure-Rheology research group at CEMEF. In 2011, he launched a “Groupement de Recherche” (GDR), funded by CNRS, networking most of the researchers in France involved in recrystallization and grain growth. In 2013, he became Research Director at CNRS. In March 2014 he joined EPFL as the head of the Laboratory of Thermomechanical Metallurgy.

Official source

Ontological neighbourhood

Chemical engineering

Materials science: Deformation of materials

Related concepts (32)

Ductility

Ductility is a mechanical property commonly described as a material's amenability to drawing (e.g. into wire). In materials science, ductility is defined by the degree to which a material can sustain plastic deformation under tensile stress before failure. Ductility is an important consideration in engineering and manufacturing. It defines a material's suitability for certain manufacturing operations (such as cold working) and its capacity to absorb mechanical overload.

Tensile testing

Tensile testing, also known as tension testing, is a fundamental materials science and engineering test in which a sample is subjected to a controlled tension until failure. Properties that are directly measured via a tensile test are ultimate tensile strength, breaking strength, maximum elongation and reduction in area. From these measurements the following properties can also be determined: Young's modulus, Poisson's ratio, yield strength, and strain-hardening characteristics.

Deformation (engineering)

In engineering, deformation refers to the change in size or shape of an object. Displacements are the absolute change in position of a point on the object. Deflection is the relative change in external displacements on an object. Strain is the relative internal change in shape of an infinitesimally small cube of material and can be expressed as a non-dimensional change in length or angle of distortion of the cube. Strains are related to the forces acting on the cube, which are known as stress, by a stress-strain curve.

Deformation (physics)

In physics and continuum mechanics, deformation is the transformation of a body from a reference configuration to a current configuration. A configuration is a set containing the positions of all particles of the body. A deformation can occur because of external loads, intrinsic activity (e.g. muscle contraction), body forces (such as gravity or electromagnetic forces), or changes in temperature, moisture content, or chemical reactions, etc. Strain is related to deformation in terms of relative displacement of particles in the body that excludes rigid-body motions.

Stress–strain curve

In engineering and materials science, a stress–strain curve for a material gives the relationship between stress and strain. It is obtained by gradually applying load to a test coupon and measuring the deformation, from which the stress and strain can be determined (see tensile testing). These curves reveal many of the properties of a material, such as the Young's modulus, the yield strength and the ultimate tensile strength. Generally speaking, curves representing the relationship between stress and strain in any form of deformation can be regarded as stress–strain curves.

Related lectures (38)

Deformation of Materials: Stresses, Deformations, and Elasticity

Explores the deformation of materials through stresses, deformations, and elasticity, focusing on the behavior of metals, ceramics, and polymers.

Materials: from Chemistry to Properties

Explores materials' behavior under stress, covering plastic deformation, elasticity, and strengthening mechanisms.

Untitled

Materials Properties: Ductility, Hardness, Toughness

Explores materials' ductility, hardness, and toughness, covering dislocations, hardening mechanisms, and polymer behavior.

Elasticity and Deformation