Hooke's lawIn physics, Hooke's law is an empirical law which states that the force (F) needed to extend or compress a spring by some distance (x) scales linearly with respect to that distance—that is, F_s = kx, where k is a constant factor characteristic of the spring (i.e., its stiffness), and x is small compared to the total possible deformation of the spring. The law is named after 17th-century British physicist Robert Hooke. He first stated the law in 1676 as a Latin anagram.
StiffnessStiffness is the extent to which an object resists deformation in response to an applied force. The complementary concept is flexibility or pliability: the more flexible an object is, the less stiff it is. The stiffness, of a body is a measure of the resistance offered by an elastic body to deformation. For an elastic body with a single degree of freedom (DOF) (for example, stretching or compression of a rod), the stiffness is defined as where, is the force on the body is the displacement produced by the force along the same degree of freedom (for instance, the change in length of a stretched spring) In the International System of Units, stiffness is typically measured in newtons per meter ().
Poisson's ratioIn materials science and solid mechanics, Poisson's ratio (nu) is a measure of the Poisson effect, the deformation (expansion or contraction) of a material in directions perpendicular to the specific direction of loading. The value of Poisson's ratio is the negative of the ratio of transverse strain to axial strain. For small values of these changes, is the amount of transversal elongation divided by the amount of axial compression. Most materials have Poisson's ratio values ranging between 0.0 and 0.5.
Young's modulusYoung's modulus , the Young modulus, or the modulus of elasticity in tension or axial compression (i.e., negative tension), is a mechanical property that measures the tensile or compressive stiffness of a solid material when the force is applied lengthwise. It quantifies the relationship between tensile/compressive stress (force per unit area) and axial strain (proportional deformation) in the linear elastic region of a material and is determined using the formula: Young's moduli are typically so large that they are expressed not in pascals but in gigapascals (GPa).
Orthotropic materialIn material science and solid mechanics, orthotropic materials have material properties at a particular point which differ along three orthogonal axes, where each axis has twofold rotational symmetry. These directional differences in strength can be quantified with Hankinson's equation. They are a subset of anisotropic materials, because their properties change when measured from different directions. A familiar example of an orthotropic material is wood.
Constitutive equationIn physics and engineering, a constitutive equation or constitutive relation is a relation between two physical quantities (especially kinetic quantities as related to kinematic quantities) that is specific to a material or substance, and approximates the response of that material to external stimuli, usually as applied fields or forces. They are combined with other equations governing physical laws to solve physical problems; for example in fluid mechanics the flow of a fluid in a pipe, in solid state physics the response of a crystal to an electric field, or in structural analysis, the connection between applied stresses or loads to strains or deformations.
École Polytechnique Fédérale de LausanneThe École polytechnique fédérale de Lausanne (EPFL; English: Swiss Federal Institute of Technology in Lausanne; Eidgenössische Technische Hochschule Lausanne) is a public research university in Lausanne, Switzerland. Established in 1853, EPFL has placed itself as a university specializing in engineering and natural sciences. EPFL is part of the ETH Domain, which is directly dependent on the Federal Department of Economic Affairs, Education and Research.
Balelec FestivalThe Balelec Festival is the largest musical event organized by students in Europe. It is usually the first open-air music festival happening in Switzerland each year during Spring. It is organised by volunteers on the campus of École Polytechnique Fédérale de Lausanne near lake Geneva in Lausanne, Switzerland around the beginning of May. Originally the ball of the school's electronics faculty, the festival is known to happen on a rainy day. It has been held at EPFL since 1981.
Presses polytechniques et universitaires romandesThe EPFL Press, formerly Presses polytechniques et universitaires romandes (PPUR) is a Swiss independent scientific publishing house and a university press affiliated with the École Polytechnique Fédérale de Lausanne (EPFL) in Lausanne, Switzerland. The EPFL Press was founded in 1980. EPFL Press is based on the EPFL campus, in the Rolex Learning Center. The EPFL Press publishes « Le savoir suisse ». This series was created in 2002 in collaboration with Bertil Galland. Between 2002 and 2012, it edited 88 books and sold 150'000 copies (in French).
Light harvesting materialsLight harvesting materials harvest solar energy that can then be converted into chemical energy through photochemical processes. Synthetic light harvesting materials are inspired by photosynthetic biological systems such as light harvesting complexes and pigments that are present in plants and some photosynthetic bacteria. The dynamic and efficient antenna complexes that are present in photosynthetic organisms has inspired the design of synthetic light harvesting materials that mimic light harvesting machinery in biological systems.
Archizoom (EPFL)Archizoom is an architecture museum settled on the campus of EPFL, in Lausanne, Switzerland. It provides a public programme of exhibitions, lectures and events for the ENAC Faculty. This programme was created in 1974 by Edith Bianchi, a graphic designer who wished to both complement education at the school of architecture and communicate about architecture to a general audience. In 2007, with impetus from architect Harry Gugger, then associate of the firm Herzog & de Meuron and professor at the EPFL, the scope of the gallery was broadened and it was renamed Archizoom.
Viktor MatejkaViktor Matejka (4 December 1901 – 2 April 1993) was a Viennese politician and writer. He spent most of the Hitler years as a detainee at one of two concentration camps. In the summer of 1943, inmates at Dachau presented a satirical focusing on Adolf Hitler, watched by the camp's SS guards. The episode was described in his obituary, half a century later, as "probably the most dangerous stage performance in the world, as well as the most absurd". The leader of the improvised performance group was Viktor Matejka.
Stress–strain curveIn engineering and materials science, a stress–strain curve for a material gives the relationship between stress and strain. It is obtained by gradually applying load to a test coupon and measuring the deformation, from which the stress and strain can be determined (see tensile testing). These curves reveal many of the properties of a material, such as the Young's modulus, the yield strength and the ultimate tensile strength. Generally speaking, curves representing the relationship between stress and strain in any form of deformation can be regarded as stress–strain curves.
Korean languageKorean (South Korean: , hangugeo; North Korean: , chosŏnmal) is the native language for about 80 million people, mostly of Korean descent. It is the official and national language of both North Korea and South Korea (geographically Korea). The two countries have established standardized norms for Korean, and the differences between them are similar to those between Standard Chinese in mainland China and Taiwan, but political conflicts between the two countries have highlighted the differences between them.
Stress (mechanics)In continuum mechanics, stress is a physical quantity that describes forces present during deformation. An object being pulled apart, such as a stretched elastic band, is subject to tensile stress and may undergo elongation. An object being pushed together, such as a crumpled sponge, is subject to compressive stress and may undergo shortening. The greater the force and the smaller the cross-sectional area of the body on which it acts, the greater the stress. Stress has units of force per area, such as newtons per square meter (N/m2) or pascal (Pa).
Stress–strain analysisStress–strain analysis (or stress analysis) is an engineering discipline that uses many methods to determine the stresses and strains in materials and structures subjected to forces. In continuum mechanics, stress is a physical quantity that expresses the internal forces that neighboring particles of a continuous material exert on each other, while strain is the measure of the deformation of the material. In simple terms we can define stress as the force of resistance per unit area, offered by a body against deformation.
Edison screwEdison screw (ES) is a standard lightbulb socket for electric light bulbs. It was developed by Thomas Edison (1847–1931), patented in 1881, and was licensed in 1909 under General Electric's Mazda trademark. The bulbs have right-hand threaded metal bases (caps) which screw into matching threaded sockets (lamp holders). For bulbs powered by AC current, the thread is generally connected to neutral and the contact on the bottom tip of the base is connected to the "live" phase.
Shear stressShear stress (often denoted by τ (Greek: tau)) is the component of stress coplanar with a material cross section. It arises from the shear force, the component of force vector parallel to the material cross section. Normal stress, on the other hand, arises from the force vector component perpendicular to the material cross section on which it acts. The formula to calculate average shear stress is force per unit area.: where: τ = the shear stress; F = the force applied; A = the cross-sectional area of material with area parallel to the applied force vector.
