Lecture

Structural Metal Design: Behavior and Resistance

Graph Chat

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

In course

CIVIL-235: Design of steel structures

Ce cours permet de maitriser les aspects fondamentaux et pratiques du dimensionnement des structures en acier. Il traite des poutres, des poteaux, des assemblages, des cadres, des systèmes porteurs et des problèmes de stabilité. ...

Description

This lecture covers the idealized behavior of materials under elastic and plastic calculations, types of flexural elements, resistance to bending moments, influence of residual stresses on section strength, and interaction between bending and axial forces in structural metal design.

Instructor

Alain Nussbaumer

Expertise Metallic structuresStructural glassFatigue and fracture mechanicsAssessment of existing structuresUltra low cycle Teaching & PhD Past EPFL PhD Students Luís Costa Borges, Claire Acevedo, Nariman Maddah, Farshid Zamiri Akhlaghi, Manuel Santarsiero, Luca D'Angelo, Cláudio Alexandre Pereira Baptista, Albano António Sousa, Jagoda Cupac, Ardalan Hosseini, Martin Garcia, Hossein Heydarinouri, Jian Zhan Past EPFL PhD Students as codirector Marina Rocha Courses Design of steel structures CIVIL-2

Official source

Ontological neighbourhood

Chemical engineering

Materials science: Deformation of materials

Related concepts (22)

Strength of materials

The field of strength of materials (also called mechanics of materials) typically refers to various methods of calculating the stresses and strains in structural members, such as beams, columns, and shafts. The methods employed to predict the response of a structure under loading and its susceptibility to various failure modes takes into account the properties of the materials such as its yield strength, ultimate strength, Young's modulus, and Poisson's ratio.

Deformation (engineering)

In engineering, deformation refers to the change in size or shape of an object. Displacements are the absolute change in position of a point on the object. Deflection is the relative change in external displacements on an object. Strain is the relative internal change in shape of an infinitesimally small cube of material and can be expressed as a non-dimensional change in length or angle of distortion of the cube. Strains are related to the forces acting on the cube, which are known as stress, by a stress-strain curve.

Compressive strength

In mechanics, compressive strength (or compression strength) is the capacity of a material or structure to withstand loads tending to reduce size (as opposed to tensile strength which withstands loads tending to elongate). In other words, compressive strength resists compression (being pushed together), whereas tensile strength resists tension (being pulled apart). In the study of strength of materials, tensile strength, compressive strength, and shear strength can be analyzed independently.

Bending moment

In solid mechanics, a bending moment is the reaction induced in a structural element when an external force or moment is applied to the element, causing the element to bend. The most common or simplest structural element subjected to bending moments is the beam. The diagram shows a beam which is simply supported (free to rotate and therefore lacking bending moments) at both ends; the ends can only react to the shear loads. Other beams can have both ends fixed (known as encastre beam); therefore each end support has both bending moments and shear reaction loads.

Shear strength

In engineering, shear strength is the strength of a material or component against the type of yield or structural failure when the material or component fails in shear. A shear load is a force that tends to produce a sliding failure on a material along a plane that is parallel to the direction of the force. When a paper is cut with scissors, the paper fails in shear. In structural and mechanical engineering, the shear strength of a component is important for designing the dimensions and materials to be used for the manufacture or construction of the component (e.

Related lectures (64)

Shear Behavior: Evaluation and Laws

Explores material behavior in shear, shear forces, stress, equilibrium, shear laws, tension/compression, plane shear, shear rate, constrained slip, and shear strength.

Bending Beams: Moment of Inertia and Stress Analysis

Explores moment of inertia in bending beams and stress analysis for beam sections.

Shock Waves and Brittle Material Response

Covers shock waves, brittle material response, phase transformation, and Hugoniot relationships in materials under stress.

A Random Walk Through Random Materials

Explores random materials, solutes, and their impact on mechanical performance, including strength, toughness, and fatigue.

Material Selection: Microtechnology Design