Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Lecture

Thermal Shrinkage and Creep in Concrete Structures

In course

MSE-322: Building materials + Laboratory work

Science des matériaux de construction non métalliques les plus utilisés et plus particulièrement des matériaux cimentaires (béton). Composition chimique, fabrication et comportement sur la durée. ...

Description

This lecture covers the concepts of thermal shrinkage and creep in concrete structures, focusing on the factors influencing them and the methods to mitigate their effects. It discusses the vulnerability of massive concrete structures to cracking due to temperature differentials, the importance of cement content and aggregate granulometry in reducing thermal gradients, and strategies such as formwork insulation and chilled water to control fresh concrete temperature. The lecture also delves into the significance of creep in structural elements, the role of water in creep mechanisms, and the interaction between shrinkage and creep in concrete behavior.

This video is available exclusively on Mediaspace for a restricted audience. Please log in to MediaSpace to access it if you have the necessary permissions.

Watch on Mediaspace

Instructors (3)

Lionel Sofia

Emmanuelle Anne Boehm Courjault

Karen Scrivener

De nationalité anglaise, Karen Scrivener est née en 1958. Au cours de sa carrière, ses travaux et sa recherche traitaient des domaines suivants: Identification du développement microstucturale pendant l'hydratation du ciment. Elaboration d'une approche multitechnique pour étudier la microstucture des ciments et bétons, avec accent sur la quantification par analyse des images d'électrons retrodiffusés. Caractérisation de l'auréole de transition de la pâte de ciment autour des granulats. Compréhension des processus de dégardation des bétons, en particulier le gonflement lié à la formation de l'éttringite retardée dans les bétons étuvés.

Official source

Ontological neighbourhood

Chemical engineering

Materials science: Concrete

Related concepts (25)

Creep (deformation)

In materials science, creep (sometimes called cold flow) is the tendency of a solid material to undergo slow deformation while subject to persistent mechanical stresses. It can occur as a result of long-term exposure to high levels of stress that are still below the yield strength of the material. Creep is more severe in materials that are subjected to heat for long periods and generally increase as they near their melting point. The rate of deformation is a function of the material's properties, exposure time, exposure temperature and the applied structural load.

Concrete

Concrete is a composite material composed of aggregate bonded together with a fluid cement that cures over time. Concrete is the second-most-used substance in the world after water, and is the most widely used building material. Its usage worldwide, ton for ton, is twice that of steel, wood, plastics, and aluminium combined. When aggregate is mixed with dry Portland cement and water, the mixture forms a fluid slurry that is easily poured and molded into shape.

Reinforced concrete

Reinforced concrete, also called ferroconcrete, is a composite material in which concrete's relatively low tensile strength and ductility are compensated for by the inclusion of reinforcement having higher tensile strength or ductility. The reinforcement is usually, though not necessarily, steel bars (rebar) and is usually embedded passively in the concrete before the concrete sets. However, post-tensioning is also employed as a technique to reinforce the concrete. In terms of volume used annually, it is one of the most common engineering materials.

Types of concrete

Concrete is produced in a variety of compositions, finishes and performance characteristics to meet a wide range of needs. Modern concrete mix designs can be complex. The choice of a concrete mix depends on the need of the project both in terms of strength and appearance and in relation to local legislation and building codes. The design begins by determining the requirements of the concrete. These requirements take into consideration the weather conditions that the concrete will be exposed to in service, and the required design strength.

Formwork

Formwork is molds into which concrete or similar materials are either precast or cast-in-place. In the context of concrete construction, the falsework supports the shuttering molds. In specialty applications formwork may be permanently incorporated into the final structure, adding insulation or helping reinforce the finished structure. Formwork may be made of wood, metal, plastic, or composite materials: Traditional timber formwork. The formwork is built on site out of timber and plywood or moisture-resistant particleboard.

Related lectures (31)

Thermal Shrinkage and Creep in Concrete

Discusses thermal shrinkage challenges in concrete structures and the importance of considering creep in structural design.

Concrete Durability: Corrosion and Repair

Discusses concrete corrosion, freeze-thaw impact, alkali reaction, and acid attacks.

Grinding Cements with Calcined Clays: How to Make LC3 MOOC: Cement Chemistry and Sustainable Cementitious Materials

Explores the process of grinding cements with calcined clays to produce LC3.

Grinding Cements with Calcined Clays MOOC: Cement Chemistry and Sustainable Cementitious Materials

Explores the importance of grinding cement to increase reactivity and compares intergrinding with separate grinding methods.

Concrete Durability: Carbonation and Chlorides