Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Lecture

Thermal Shrinkage and Creep in Concrete

In course

MSE-171: Materials

Une introduction à la science des matériaux appliquée aux matériaux de construction courants, en particulier le béton et les métaux. Description de leur fabrication, leurs comportements mécanique et thermique et leur utilisation en construction. ...

Description

This lecture covers the challenges of thermal shrinkage in concrete structures, which are prone to cracking due to temperature effects. Strategies to reduce thermal gradients include adjusting cement content, using low heat cement, and formwork insulation. Creep, a long-term deformation in concrete, is also discussed, emphasizing the importance of considering it in structural design.

Instructors (6)

Jean-Marie Drezet

1992-1996: PhD work at Laboratoire de Métallurgie Physique under the supervision of Prof. Michel Rappaz (cf : http://library.epfl.ch/theses/?display=detail&nr=1509) 1997-2000: EMPACT project (European Modelling Programme for Aluminium Casting Technologies) 2001-2004: VIRCAST project (European Virtual Casting) 2005-2006: Study of the sawing process of rolling sheet al. ingots (Alcan Fonds) 2005-2006: WelAIR project (Welding of Airframes, EADS) 2005-2008: study of the electron beam welding of Cu-Cr-Zr alloys (CEA, France) 2006-2008: study of the laser beam welding of Al-Li alloys (EADS, France) 2008-2011: co-supervision with Prof. A. Nussbaumer of the PhD work of C. Acevedo on the influence of residual stresses on the fatigue design of tubular welded joints, http://library.epfl.ch/theses/?nr=5056 2007-2010: co-supervision with Prof. J.-F. Molinari of the PhD work of K. Shahim on the Normal Pressure Hydrocephalus (S. Momjian, HU-Genève et R. Sinkus, ESPCI-Paris), http://library.epfl.ch/theses/?nr=5191 2008-2012: co-supervision with Prof. M. Rappaz of the PhD work of M. Sistaninia on the simulation of solidification cracking using granular models (CCMX-MERU project) 2010-2014: supervision with Prof. M. Rappaz of the PhD work of N. Chobaut on the modelling of stresses during quenching of thick heat treatable aluminium parts (CCMX-MERU project) 2011-2015: supervision with Prof. H. Van Swygenhoven-Moens of the PhD work of P. Schloth on precipitation during quenching of thick heat treatable aluminium parts (CCMX-MERU project)

Lionel Sofia

Cyril Henri Dénéréaz

Emmanuelle Anne Boehm Courjault

Karen Scrivener

De nationalité anglaise, Karen Scrivener est née en 1958. Au cours de sa carrière, ses travaux et sa recherche traitaient des domaines suivants: Identification du développement microstucturale pendant l'hydratation du ciment. Elaboration d'une approche multitechnique pour étudier la microstucture des ciments et bétons, avec accent sur la quantification par analyse des images d'électrons retrodiffusés. Caractérisation de l'auréole de transition de la pâte de ciment autour des granulats. Compréhension des processus de dégardation des bétons, en particulier le gonflement lié à la formation de l'éttringite retardée dans les bétons étuvés.

Official source

Ontological neighbourhood

Chemical engineering

Materials science: Concrete

Related concepts (29)

Creep (deformation)

In materials science, creep (sometimes called cold flow) is the tendency of a solid material to undergo slow deformation while subject to persistent mechanical stresses. It can occur as a result of long-term exposure to high levels of stress that are still below the yield strength of the material. Creep is more severe in materials that are subjected to heat for long periods and generally increase as they near their melting point. The rate of deformation is a function of the material's properties, exposure time, exposure temperature and the applied structural load.

Cement

A cement is a binder, a chemical substance used for construction that sets, hardens, and adheres to other materials to bind them together. Cement is seldom used on its own, but rather to bind sand and gravel (aggregate) together. Cement mixed with fine aggregate produces mortar for masonry, or with sand and gravel, produces concrete. Concrete is the most widely used material in existence and is behind only water as the planet's most-consumed resource.

Concrete

Concrete is a composite material composed of aggregate bonded together with a fluid cement that cures over time. Concrete is the second-most-used substance in the world after water, and is the most widely used building material. Its usage worldwide, ton for ton, is twice that of steel, wood, plastics, and aluminium combined. When aggregate is mixed with dry Portland cement and water, the mixture forms a fluid slurry that is easily poured and molded into shape.

Structural engineering

Structural engineering is a sub-discipline of civil engineering in which structural engineers are trained to design the 'bones and muscles' that create the form and shape of human-made structures. Structural engineers also must understand and calculate the stability, strength, rigidity and earthquake-susceptibility of built structures for buildings and nonbuilding structures. The structural designs are integrated with those of other designers such as architects and building services engineer and often supervise the construction of projects by contractors on site.

Formwork

Formwork is molds into which concrete or similar materials are either precast or cast-in-place. In the context of concrete construction, the falsework supports the shuttering molds. In specialty applications formwork may be permanently incorporated into the final structure, adding insulation or helping reinforce the finished structure. Formwork may be made of wood, metal, plastic, or composite materials: Traditional timber formwork. The formwork is built on site out of timber and plywood or moisture-resistant particleboard.

Related lectures (54)

Structural Design of Footbridges

Explores the structural design of footbridges, highlighting key considerations and challenges.

Concrete and Sustainability: Challenges in Structural Engineering

Delves into challenges in structural engineering, emphasizing sustainability, concrete design, and energy efficiency.

Engineering Existing Structures: UHPFRC and Structural Maintenance

Explores UHPFRC and structural maintenance in engineering existing structures.

Beams and Walls: The Art of Structures II

Delves into the design of beams and walls in structures, showcasing real-world applications.

Shrinkage and Sorption MOOC: Sorption and transport in cementitious materials