Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Lecture

Semicustom RTL Design: Design Flow and Standard Cells

In course

EE-429: Fundamentals of VLSI design

The course introduces the fundamentals of digital integrated circuits and the technology aspects from a designers perspective. It focuses mostly on transistor level, but discusses also the extension to large digital semicustom designs. ...

Description

This lecture covers the fundamentals of VLSI design, focusing on the RTL (Semi-Custom) design flow, the differences between full-custom and semi-custom design, and the anatomy of complex SoCs. It also delves into chip-level integration strategies, standard cells, and the design flow for semi-custom ASICs. The lecture explains the RTL design flow, chip-level integration, and the importance of static timing analysis in digital circuit design. It concludes with insights into the automatic characterization of standard cells and the use of LEF files for library exchange and cell characterization.

This video is available exclusively on Mediaspace for a restricted audience. Please log in to MediaSpace to access it if you have the necessary permissions.

Watch on Mediaspace

Instructors (2)

Andreas Peter Burg

Andreas Burg was born in Munich, Germany, in 1975. He received his Dipl.-Ing. degree in 2000 from the Swiss Federal Institute of Technology (ETH) Zurich, Zurich, Switzerland. He then joined the Integrated Systems Laboratory of ETH Zurich, from where he graduated with the Dr. sc. techn. degree in 2006. In 1998, he worked at Siemens Semiconductors, San Jose, CA. During his doctoral studies, he was an intern with Bell Labs Wireless Research for a total of one year. From 2006 to 2007, he held positions as postdoctoral researcher at the Integrated Systems Laboratory and at the Communication Theory Group of the ETH Zurich. In 2007 he co-founded Celestrius, an ETH-spinoff in the field of MIMO wireless communication, where he was responsible for the ASIC development as Director for VLSI. In January 2009, he joined ETH Zurich as SNF Assistant Professor and as head of the Signal Processing Circuits and Systems group at the Integrated Systems Laboratory. In January 2011, he became a Tenure Track Assistant Professor at the Ecole Polytechnique Federale de Lausanne (EPFL) where he is leading the Telecommunications Circuits Laboratory in the School of Engineering. In June 2018 he was promoted to the role of a Tenured Associate Professor. In 2000, Mr. Burg received the Willi Studer Award and the ETH Medal for his diploma and his diploma thesis, respectively. Mr. Burg was also awarded an ETH Medal for his Ph.D. dissertation in 2006. In 2008, he received a 4-years grant from the Swiss National Science Foundation (SNF) for an SNF Assistant Professorship. In his professional career, Mr. Burg was involved in the development of more than 25 ASICs. He is a member of the IEEE and of the European Association for Signal Processing (EURASIP). Research interests and expertise

Circuits and systems for telecommunications (wireless and wired)
Prototyping and silicon implementation of new communication technologies
Development of communication algorithms and optimization for hardware implementation
Low-power VLSI signal processing for communications and other applications
Digital integrated circuits
Circuits for image and video processing

Alexandre Sébastien Julien Levisse

Official source

Ontological neighbourhood

Computer engineering

Hardware engineering: Application-specific integrated circuit

Related concepts (32)

Integrated circuit design

Integrated circuit design, or IC design, is a sub-field of electronics engineering, encompassing the particular logic and circuit design techniques required to design integrated circuits, or ICs. ICs consist of miniaturized electronic components built into an electrical network on a monolithic semiconductor substrate by photolithography. IC design can be divided into the broad categories of digital and analog IC design. Digital IC design is to produce components such as microprocessors, FPGAs, memories (RAM, ROM, and flash) and digital ASICs.

Very Large Scale Integration

Very large-scale integration (VLSI) is the process of creating an integrated circuit (IC) by combining millions or billions of MOS transistors onto a single chip. VLSI began in the 1970s when MOS integrated circuit (Metal Oxide Semiconductor) chips were developed and then widely adopted, enabling complex semiconductor and telecommunication technologies. The microprocessor and memory chips are VLSI devices. Before the introduction of VLSI technology, most ICs had a limited set of functions they could perform.

Electronic design automation

Electronic design automation (EDA), also referred to as electronic computer-aided design (ECAD), is a category of software tools for designing electronic systems such as integrated circuits and printed circuit boards. The tools work together in a design flow that chip designers use to design and analyze entire semiconductor chips. Since a modern semiconductor chip can have billions of components, EDA tools are essential for their design; this article in particular describes EDA specifically with respect to integrated circuits (ICs).

Physical design (electronics)

In integrated circuit design, physical design is a step in the standard design cycle which follows after the circuit design. At this step, circuit representations of the components (devices and interconnects) of the design are converted into geometric representations of shapes which, when manufactured in the corresponding layers of materials, will ensure the required functioning of the components. This geometric representation is called integrated circuit layout.

Standard cell

In semiconductor design, standard-cell methodology is a method of designing application-specific integrated circuits (ASICs) with mostly digital-logic features. Standard-cell methodology is an example of design abstraction, whereby a low-level very-large-scale integration (VLSI) layout is encapsulated into an abstract logic representation (such as a NAND gate). Cell-based methodology – the general class to which standard cells belong – makes it possible for one designer to focus on the high-level (logical function) aspect of digital design, while another designer focuses on the implementation (physical) aspect.

Related lectures (53)

Analog CMOS Integrated Circuits: Fundamentals

Covers the fundamentals of analog CMOS integrated circuits, emphasizing transistor-level design principles and the historical impact of CMOS technology.

Semicustom RTL Design: Frontend with Synthesis Log in to Mediaspace to watch this video

Covers the fundamentals of VLSI design, focusing on the semi-custom design flow.

Logical Effort: Fundamentals of VLSI Design Log in to Mediaspace to watch this video

Covers the Logical Effort method for optimizing logic delay and gate sizing impact.

How we design chips: The Digital VLSI Design Flow Log in to Mediaspace to watch this video

Explores the principles and methodologies for designing integrated circuits, covering design flows, VLSI styles, abstraction levels, and the semiconductor ecosystem.

Digital Integrated Circuits: Evolution and Design Log in to Mediaspace to watch this video