Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Lecture

Elastic Strain Energy: Castigliano's Theorem

In course

ME-232: Mechanics of structures (For GM)

L'étudiant acquiert les bases de l'analyse des contraintes et déformation des poutres élastiques linéaires soumises à la traction, cisaillement, torsion, flexion; les coefficients d'influence et la méthode de l'énergie pour analyser des systèmes isostatiq ...

Description

This lecture covers the concept of elastic strain energy, focusing on Castigliano's theorem to determine vertical displacements in embedded beams. It also discusses Clapeyron's formulas, Betti-Rayleigh reciprocity theorem, and applications in calculating deflections and stored energy in coil springs.

This video is available exclusively on Mediaspace for a restricted audience. Please log in to MediaSpace to access it if you have the necessary permissions.

Watch on Mediaspace

Instructor

Alain Michel Prenleloup

Official source

Ontological neighbourhood

Chemical engineering

Materials science: Deformation of materials

Related concepts (24)

Stress (mechanics)

In continuum mechanics, stress is a physical quantity that describes forces present during deformation. An object being pulled apart, such as a stretched elastic band, is subject to tensile stress and may undergo elongation. An object being pushed together, such as a crumpled sponge, is subject to compressive stress and may undergo shortening. The greater the force and the smaller the cross-sectional area of the body on which it acts, the greater the stress. Stress has units of force per area, such as newtons per square meter (N/m2) or pascal (Pa).

Shear modulus

In materials science, shear modulus or modulus of rigidity, denoted by G, or sometimes S or μ, is a measure of the elastic shear stiffness of a material and is defined as the ratio of shear stress to the shear strain: where = shear stress is the force which acts is the area on which the force acts = shear strain. In engineering , elsewhere is the transverse displacement is the initial length of the area. The derived SI unit of shear modulus is the pascal (Pa), although it is usually expressed in gigapascals (GPa) or in thousand pounds per square inch (ksi).

Stress–strain curve

In engineering and materials science, a stress–strain curve for a material gives the relationship between stress and strain. It is obtained by gradually applying load to a test coupon and measuring the deformation, from which the stress and strain can be determined (see tensile testing). These curves reveal many of the properties of a material, such as the Young's modulus, the yield strength and the ultimate tensile strength. Generally speaking, curves representing the relationship between stress and strain in any form of deformation can be regarded as stress–strain curves.

Shear strength

In engineering, shear strength is the strength of a material or component against the type of yield or structural failure when the material or component fails in shear. A shear load is a force that tends to produce a sliding failure on a material along a plane that is parallel to the direction of the force. When a paper is cut with scissors, the paper fails in shear. In structural and mechanical engineering, the shear strength of a component is important for designing the dimensions and materials to be used for the manufacture or construction of the component (e.

Cauchy stress tensor

In continuum mechanics, the Cauchy stress tensor , true stress tensor, or simply called the stress tensor is a second order tensor named after Augustin-Louis Cauchy. The tensor consists of nine components that completely define the state of stress at a point inside a material in the deformed state, placement, or configuration. The tensor relates a unit-length direction vector e to the traction vector T(e) across an imaginary surface perpendicular to e: or, The SI units of both stress tensor and traction vector are N/m2, corresponding to the stress scalar.

Related lectures (42)

Shear and Bearing Stresses

Explores shear and bearing stresses, including plasticity, creep, Hooke's Law, and allowable stresses in engineering design.

Finite Element Analysis: Advanced Mechanisms in Engineering

Provides an overview of advanced mechanisms analysis using Finite Element Method and Finite Element Analysis in engineering applications.

Elasticity and Deformation

Covers stress, strain, modulus of elasticity, and material behavior under different loads.

Beams under nonuniform bending: Shear stresses and built-up beams

Covers shear stresses in beams and built-up beams, including shear flow calculations and stress superimposition.

Structural Mechanics: Nonuniform Torsion