Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Lecture

Forced Boiling: Internal Flow

In course

ME-341: Heat and mass transfer

This course covers fundamentals of heat transfer and applications to practical problems. Emphasis will be on developing a physical and analytical understanding of conductive, convective, and radiative heat transfer. ...

Description

This lecture covers the concept of forced boiling, focusing on internal flow. It explains the heat transfer coefficient, boiling regimes, and critical heat flux. The lecture also discusses nucleate pool boiling correlations, film pool boiling, and forced convection boiling in both external and internal flows.

This video is available exclusively on Mediaspace for a restricted audience. Please log in to MediaSpace to access it if you have the necessary permissions.

Watch on Mediaspace

Instructor

Giulia Tagliabue

Dr. Giulia Tagliabue is an Assistant Professor at the Institute of Mechanical Engineering (IGM). She obtained her B.S. and M.S degrees cum laude in Mechanical Engineering from the University of Udine in Italy. Concurrently she also obtained the diploma from the Scuola Normale Superiore of Udine. In 2015 she obtained her PhD in Mechanical Engineering from ETH Zurich with a thesis on nanophotonic design for light-to-heat and light-to-charge conversion devices. In 2015 Dr. Tagliabue was awarded the Early Mobility Fellowship from the Swiss National Science Foundation and moved to Caltech as a PostDoctoral fellow. In 2017, thanks to the award of an Advanced Mobility Fellowship, she prolonged her stay at Caltech. Here, in collaboration with the Joint Center for Artificial Photosynthesis (JCAP) she investigated coupled light, heat and charge transfer processes in nanophotonic structures and low-dimensional materials for photoelectrochemical and photovoltaic sustainable energy conversion.

Official source

Related concepts (32)

Heat transfer

Heat transfer is a discipline of thermal engineering that concerns the generation, use, conversion, and exchange of thermal energy (heat) between physical systems. Heat transfer is classified into various mechanisms, such as thermal conduction, thermal convection, thermal radiation, and transfer of energy by phase changes. Engineers also consider the transfer of mass of differing chemical species (mass transfer in the form of advection), either cold or hot, to achieve heat transfer.

Heat transfer coefficient

In thermodynamics, the heat transfer coefficient or film coefficient, or film effectiveness, is the proportionality constant between the heat flux and the thermodynamic driving force for the flow of heat (i.e., the temperature difference, ΔT ). It is used in calculating the heat transfer, typically by convection or phase transition between a fluid and a solid. The heat transfer coefficient has SI units in watts per square meter per kelvin (W/m2/K).

Boiling

Boiling is the rapid phase transition from liquid to gas or vapor; the reverse of boiling is condensation. Boiling occurs when a liquid is heated to its boiling point, so that the vapour pressure of the liquid is equal to the pressure exerted on the liquid by the surrounding atmosphere. Boiling and evaporation are the two main forms of liquid vapourization. There are two main types of boiling: nucleate boiling where small bubbles of vapour form at discrete points, and critical heat flux boiling where the boiling surface is heated above a certain critical temperature and a film of vapour forms on the surface.

Critical heat flux

In the study of heat transfer, critical heat flux (CHF) is the heat flux at which boiling ceases to be an effective form of transferring heat from a solid surface to a liquid. Boiling systems are those in which liquid coolant absorbs energy from a heated solid surface and undergoes a change in phase. In flow boiling systems, the saturated fluid progresses through a series of flow regimes as vapor quality is increased. In systems that utilize boiling, the heat transfer rate is significantly higher than if the fluid were a single phase (i.

Convection (heat transfer)

Convection (or convective heat transfer) is the transfer of heat from one place to another due to the movement of fluid. Although often discussed as a distinct method of heat transfer, convective heat transfer involves the combined processes of conduction (heat diffusion) and advection (heat transfer by bulk fluid flow). Convection is usually the dominant form of heat transfer in liquids and gases. Note that this definition of convection is only applicable in Heat transfer and thermodynamic contexts.

Related lectures (50)

Thermal Transport & Steady-state

Explores thermal transport, equilibrium, and heat flux in fluids.

Heat Transfer Processes

Covers the fundamentals of heat transfer processes, including convection, conduction, and radiation.

Transient Heat Transfer Log in to Mediaspace to watch this video

Covers exercises on heat and mass transfer, including multimodal heat transfer and transient conduction.

Forced Convection Correlations Log in to Mediaspace to watch this video

Explores forced external convection correlations and the procedure for solving convection problems, including the comparison of velocity and thermal boundary layers.

Internal Forced Convection: Hydrodynamic Aspects Log in to Mediaspace to watch this video