Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Lecture

Heat Transfer from Extended Surfaces: Fins

In course

ME-341: Heat and mass transfer

This course covers fundamentals of heat transfer and applications to practical problems. Emphasis will be on developing a physical and analytical understanding of conductive, convective, and radiative heat transfer. ...

Description

This lecture covers the fundamentals of heat transfer from extended surfaces, focusing on fins. It explains the concept of fins, temperature profiles in fins with constant cross-section, and the performance of fin-based systems. The lecture also discusses thermal resistance, overall heat transfer coefficients, and optimization of fins to maximize heat transfer efficiency.

This video is available exclusively on Mediaspace for a restricted audience. Please log in to MediaSpace to access it if you have the necessary permissions.

Watch on Mediaspace

Instructor

Giulia Tagliabue

Dr. Giulia Tagliabue is an Assistant Professor at the Institute of Mechanical Engineering (IGM). She obtained her B.S. and M.S degrees cum laude in Mechanical Engineering from the University of Udine in Italy. Concurrently she also obtained the diploma from the Scuola Normale Superiore of Udine. In 2015 she obtained her PhD in Mechanical Engineering from ETH Zurich with a thesis on nanophotonic design for light-to-heat and light-to-charge conversion devices. In 2015 Dr. Tagliabue was awarded the Early Mobility Fellowship from the Swiss National Science Foundation and moved to Caltech as a PostDoctoral fellow. In 2017, thanks to the award of an Advanced Mobility Fellowship, she prolonged her stay at Caltech. Here, in collaboration with the Joint Center for Artificial Photosynthesis (JCAP) she investigated coupled light, heat and charge transfer processes in nanophotonic structures and low-dimensional materials for photoelectrochemical and photovoltaic sustainable energy conversion.

Official source

Related concepts (32)

Heat transfer coefficient

In thermodynamics, the heat transfer coefficient or film coefficient, or film effectiveness, is the proportionality constant between the heat flux and the thermodynamic driving force for the flow of heat (i.e., the temperature difference, ΔT ). It is used in calculating the heat transfer, typically by convection or phase transition between a fluid and a solid. The heat transfer coefficient has SI units in watts per square meter per kelvin (W/m2/K).

Convection (heat transfer)

Convection (or convective heat transfer) is the transfer of heat from one place to another due to the movement of fluid. Although often discussed as a distinct method of heat transfer, convective heat transfer involves the combined processes of conduction (heat diffusion) and advection (heat transfer by bulk fluid flow). Convection is usually the dominant form of heat transfer in liquids and gases. Note that this definition of convection is only applicable in Heat transfer and thermodynamic contexts.

Heat transfer

Heat transfer is a discipline of thermal engineering that concerns the generation, use, conversion, and exchange of thermal energy (heat) between physical systems. Heat transfer is classified into various mechanisms, such as thermal conduction, thermal convection, thermal radiation, and transfer of energy by phase changes. Engineers also consider the transfer of mass of differing chemical species (mass transfer in the form of advection), either cold or hot, to achieve heat transfer.

Heat

In thermodynamics, heat is the thermal energy transferred between systems due to a temperature difference. In colloquial use, heat sometimes refers to thermal energy itself. An example of formal vs. informal usage may be obtained from the right-hand photo, in which the metal bar is "conducting heat" from its hot end to its cold end, but if the metal bar is considered a thermodynamic system, then the energy flowing within the metal bar is called internal energy, not heat.

Minimal surface

In mathematics, a minimal surface is a surface that locally minimizes its area. This is equivalent to having zero mean curvature (see definitions below). The term "minimal surface" is used because these surfaces originally arose as surfaces that minimized total surface area subject to some constraint. Physical models of area-minimizing minimal surfaces can be made by dipping a wire frame into a soap solution, forming a soap film, which is a minimal surface whose boundary is the wire frame.

Related lectures (53)

Heat Transfer from Extended Surfaces: Fins Log in to Mediaspace to watch this video

Covers the heat transfer from fins, exploring their behavior and optimization for efficiency.

Transient Heat Transfer Log in to Mediaspace to watch this video

Covers exercises on heat and mass transfer, including multimodal heat transfer and transient conduction.

Forced Convection Correlations Log in to Mediaspace to watch this video

Explores forced external convection correlations and the procedure for solving convection problems, including the comparison of velocity and thermal boundary layers.

Internal Forced Convection: Hydrodynamic Aspects Log in to Mediaspace to watch this video

Covers the hydrodynamic and thermal aspects of internal forced convection.

Introduction to Free Convection: Governing Equations Log in to Mediaspace to watch this video