Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Lecture

Thermal Machines: Heat Pumps

In course

PHYS-106(a): General physics : thermodynamics

Le but du cours de Physique générale est de fournir les notions de base nécessaires à la compréhension des phénomènes physiques. L'objectif est atteint lorsqu'il est possible de prévoir quantitativement les conséquences de ces phénomènes avec des outils th ...

Description

This lecture covers the principles of thermal machines, focusing on heat pumps and their efficiency improvement through the use of compressors for phase transitions. It also discusses the energy transfer in heat pumps, the different sources of heat, and the various types of heat pump systems.

This video is available exclusively on Mediaspace for a restricted audience. Please log in to MediaSpace to access it if you have the necessary permissions.

Watch on Mediaspace

Instructors (2)

Romuald Houdré

Curriculum Vitae CV 2011 Appointed as Adjunct Professor 2006 Appointed as Maitre d'Enseignement et de Recherche 2004 Joins the "Laboratory of Quantum Electronics" led by Prof. B. Deveaud-Plédran 2001-2004 Appointed as "Adjoint Scientifique" at the Institute for Quantum Photonics and Electronics (previously Institute for Micro and Optoelectronics led by Prof. M. Ilegems) 1998 Habilitation, University Pierre et Marie Curie, Paris 6 (France) 1997 Invited researcher at NTT, Optoelectronics Department (Atsugi, Japan) 1988-2000 "Collaborateur scientifique" at the Institut for Micro and Optoelectronics with Prof. M.Ilegems at the Swiss Federal Institut of Technology in Lausanne (Switzerland). In charge of the Molecular Beam Epitaxy (1988-1996) and the research on optical microcavities (1996-2000) 1987-1988 Laboratoire de Physique de la Matière Condensée at Ecole Polytechnique (France). 1986-1987 Postdoctoral fellow at the University of Illinois at Urbana-Champaign (U.S.A.) with Prof. H.Morkoç in the molecular beam epitaxy group 1983-1985 Ph.D. thesis on the photoemission from quantum wells and superlattices under negative electron affinity at Laboratoire de Physique de la Matière Condensée, Ecole Polytechnique (France), G.Lampel and C.Hermann as advisors

Cécile Hébert

Cécile Hébert was born in France in 1970. She obtained her Ingeneer degree (physics) and her PhD degree (design of a new energy filter for transmission electron microscopy, under the direction of Prof. B. Jouffrey) at the Ecole Centrale in Paris. As a post doc with Prof. P. Schattschneider, she was working on the calculation of the fine structure of ionisation edges in EELS. As a research assistant at the Vienna University of Technology, she was one of the main participant to the CHIRALTEM project dealing with the measurement of magnetic circular dichroism in the electron microscope.

Official source

Related concepts (18)

Heat pump

A heat pump is a device that uses work to transfer heat from a cool space to a warm space by transferring thermal energy using a refrigeration cycle, cooling the cool space and warming the warm space. In cold weather a heat pump can move heat from the cool outdoors to warm a house; the pump may also be designed to move heat from the house to the warmer outdoors in warm weather. As they transfer heat rather than generating heat, they are more energy-efficient than other ways of heating a home.

Ground source heat pump

A ground source heat pump (also geothermal heat pump) is a heating/cooling system for buildings that uses a type of heat pump to transfer heat to or from the ground, taking advantage of the relative constancy of temperatures of the earth through the seasons. Ground source heat pumps (GSHPs) – or geothermal heat pumps (GHP) as they are commonly termed in North America – are among the most energy-efficient technologies for providing HVAC and water heating, using far less energy than can be achieved by burning a fuel in a boiler/furnace or by use of resistive electric heaters.

Air source heat pump

An air source heat pump (ASHP) is a type of heat pump that can absorb heat from outside a structure and release it inside using the same vapor-compression refrigeration process and much the same equipment as air conditioners but used in the opposite direction. Unlike an air conditioning unit, most ASHPs are reversible and are able to either warm or cool buildings and in some cases also provide domestic hot water. In a typical setting, an ASHP can gain 4 kWh thermal energy from 1 kWh electric energy.

Heat transfer

Heat transfer is a discipline of thermal engineering that concerns the generation, use, conversion, and exchange of thermal energy (heat) between physical systems. Heat transfer is classified into various mechanisms, such as thermal conduction, thermal convection, thermal radiation, and transfer of energy by phase changes. Engineers also consider the transfer of mass of differing chemical species (mass transfer in the form of advection), either cold or hot, to achieve heat transfer.

Heat pump and refrigeration cycle

Thermodynamic heat pump cycles or refrigeration cycles are the conceptual and mathematical models for heat pump, air conditioning and refrigeration systems. A heat pump is a mechanical system that allows for the transmission of heat from one location (the "source") at a lower temperature to another location (the "sink" or "heat sink") at a higher temperature. Thus a heat pump may be thought of as a "heater" if the objective is to warm the heat sink (as when warming the inside of a home on a cold day), or a "refrigerator" or “cooler” if the objective is to cool the heat source (as in the normal operation of a freezer).

Related lectures (51)

Heat Pumps: Phase Changes

Explores heat pump operation, phase changes, and latent heat in thermodynamics.

Phase Changes and Heat Latent: Water in Different Forms

Explores phase changes and latent heat in water, covering topics like heat pumps, climate impact, and ozone layer depletion.

Energy Conversion Systems: Efficiency and Design

Explores energy efficiency, exergy analysis, utility integration, combustion, boiler efficiency, cogeneration, gas turbines, heat pump, refrigeration, and system design.

Heat Transfer Interfaces: Pinch Point Analysis

Analyzes heat transfer interfaces, pinch points, energy optimization, pressure changes, heat cascades, and heat pump efficiency.

Energy System Modeling: Optimization and Performance Indicators