Lecture

Power Cycles & Heat Pumps

Graph Chat

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

In course

ME-459: Heat pump systems

This course aims to study heat pumping cycles and technologies, and equipment, such as compressors (positive displacement and dynamic), heat exchangers, and expansion valves. ...

Description

This lecture covers the historic evolution of COP trends in power cycles and heat pumps, the key challenges in heat pump cycles, compressor technology selection, turbocompressor scaling analysis, high-speed bearing classes, and the potential of oil-free turbocompressors on COP. It also discusses domestic heating with heat pumps, thermally driven heat pump compressors, experiments on thermally driven heat pumps, and the challenges of reduced-scale turbomachinery.

Instructors (2)

Jan Van Herle

Born in Antwerp, Belgium. In Switzerland since 1983. Became Swiss citizen in 2004 out of conviction of principles of democracy and bottom-up participation. No double nationality. Village Council Member for 2 five-year mandates in 2006-2016. 1987 : Chemist from Basel University (CH). 1988 : Post-graduate IT diploma from Basel Engineering School. 1989 : Industry internship ABB Baden (CH). 1990-1993 : PhD Thesis EPFL, on Solid Oxide Fuel Cell cathode reaction mechanisms. 1994-1995 : Japanese Postdoctoral Fellowship in Tsukuba, Japan, on ceramic powders. 1995-2000 : Researcher at EPFL, Dpt. Chemistry : project responsible in PPM2 (materials), FP4-BriteEuram, NEDO (Japan), Swiss Gas Union (CH, oxygen membranes). 1998-2000 : Masters in Energy Technology, EPFL. 2000 : Cofounder of HTceramix SA (EPFL spin-off), now based in Yverdon (14 employees). Taken over by SOLIDpower in 2007, now 250 employees with 70 MCHF raised. 2000 : 1st Assistant and lecturer at LENI (STI-IGM) : fuel cell group responsible, projects on biogas (Federal Energy Office), woodgas (CCEM), fuel cell stacking (CTI, FP6, FNS), ceramic separation membranes (COST, FNS), microtubes (STI Seed), stability/lifetime/reliability in fuel cells (Electricité de France, swisselectric research). Currently 4 Ph D theses ongoing, 14 theses concluded, of which 5 colateral with SB and IMX. M.E.R. since Nov 2008. Total funding raised so far >18 MCHF (50% as main applicant; 30% outside CH; 20% industry). Scientific output : >135 peer-reviewed publications, >120 conference papers, 40 invited presentations (8 keynotes), >70 granted proposals. Fluent in 5 languages (Dutch, French, German ( Swiss-german), English, Spanish).

Jürg Alexander Schiffmann

Teaching & PhD PhD Students Hendrik Dietmar Schillinger, Gabriele Iovanna, Husam Jubran, Selahittin Atilay Zervent, Harshita Ravindra Agarwal, Anupam Jena, Issam Soukhmane, Tristan Wolff Schwab, Aman Jain, Masato Omotsubo, Konstantin Andreas Jacoby, Andrii Artomov, Arnau Catala I Rams, Elize Alwash, Emanuele Pallaoro, Anna Abramishvili Past EPFL PhD Students Violette Mounier, Karim Magdi Zakaria Abdelrahman Shalash, Patrick Hubert Wagner, Markus Diehl, Philipp Kaspar Bättig, Kévin Rosset, Eliott Philippe

Official source

Ontological neighbourhood

Mechanical engineering

Thermal engineering: Air conditioning

Related concepts (32)

Heat pump

A heat pump is a device that uses work to transfer heat from a cool space to a warm space by transferring thermal energy using a refrigeration cycle, cooling the cool space and warming the warm space. In cold weather a heat pump can move heat from the cool outdoors to warm a house; the pump may also be designed to move heat from the house to the warmer outdoors in warm weather. As they transfer heat rather than generating heat, they are more energy-efficient than other ways of heating a home.

Heat transfer

Heat transfer is a discipline of thermal engineering that concerns the generation, use, conversion, and exchange of thermal energy (heat) between physical systems. Heat transfer is classified into various mechanisms, such as thermal conduction, thermal convection, thermal radiation, and transfer of energy by phase changes. Engineers also consider the transfer of mass of differing chemical species (mass transfer in the form of advection), either cold or hot, to achieve heat transfer.

Bearing (mechanical)

A bearing is a machine element that constrains relative motion to only the desired motion and reduces friction between moving parts. The design of the bearing may, for example, provide for free linear movement of the moving part or for free rotation around a fixed axis; or, it may prevent a motion by controlling the vectors of normal forces that bear on the moving parts. Most bearings facilitate the desired motion by minimizing friction.

Central heating

A central heating system provides warmth to a number of spaces within a building from one main source of heat. It is a component of heating, ventilation, and air conditioning (short: HVAC) systems, which can both cool and warm interior spaces. A central heating system has a furnace that converts fuel or electricity to heat. The heat is circulated through the building either by fans forcing heated air through ducts, circulation of low-pressure steam to radiators in each heated room, or pumps that circulate hot water through room radiators.

Rolling-element bearing

In mechanical engineering, a rolling-element bearing, also known as a rolling bearing, is a bearing which carries a load by placing rolling elements (such as balls or rollers) between two concentric, grooved rings called races. The relative motion of the races causes the rolling elements to roll with very little rolling resistance and with little sliding. One of the earliest and best-known rolling-element bearings are sets of logs laid on the ground with a large stone block on top.

Related lectures (64)

Power Cycles & Heat Pumps

Explores practical aspects of power cycles and heat pumps for performance improvement.

Heat Pumps: Introduction

Covers the working principle and efficiency comparison of heat pumps with boilers.

Heat Pumps & Power Cycles

Discusses technical challenges in implementing the Carnot cycle, energy and exergy balances, and the advantages of exergy analysis.

Heat Exchangers: Fundamentals and Applications

Covers the fundamentals and applications of heat exchangers in heat pumps.

Heat Strategy for Building Heating