Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Metal matrix composite

Related publications (32)

Experimental investigation of rotational behavior of pseudo-ductile adhesive angle joints exhibiting variable strain rate

Thomas Keller, Ghazaleh Eslami, Abdolvahid Movahedirad

Pseudo-ductile behavior in composite structural frames can be achieved by enabling their beam-column joints to exhibit nonlinear structural response due to progressive damage, by using pseudo-ductile adhesives. This study investigates the static behavior o ...

2023

Liquid metal infiltration of silicon based alloys into porous carbonaceous materials Part-III: Experimental verification of conversion products and infiltration depth by infiltration of Si-Zr alloy into mixed SiC/ graphite preforms

Ludger Weber, Caroline Hain, Manoj Kondibhau Naikade, Annapaola Parrilli

Porous carbonaceous preforms, made from graphite and silicon carbide (SiC) powders, with varying graphite powder mass fractions and particle sizes, were infiltrated at 1500 degrees C and 1700 degrees C by Si-8 at. pct Zr alloy to produce dense Si-Zr-SiC co ...

ELSEVIER SCI LTD2023

Atomic scale volume and grain boundary diffusion elucidated by in situ STEM

Johann Michler, Xavier Maeder, Laszlo Pethö

Diffusion is one of the most important phenomena studied in science ranging from physics to biology and, in abstract form, even in social sciences. In the field of materials science, diffusion in crystalline solids is of particular interest as it plays a p ...

Nature Portfolio2023

Reinforcement bond performance in 3D concrete printing: Explainable ensemble learning augmented by deep generative adversarial networks

Xianlin Wang

Integrating various reinforcements into 3D concrete printing (3DCP) is an efficient method to satisfy critical requirements for structural applications. This paper explores an explainable ensemble machine learning (EML) method to predict the bond failure m ...

Elsevier2023

Liquid metal infiltration of silicon based alloys into porous carbonaceous materials. Part I: Modelling of channel filling and reaction phase formation

Ludger Weber, Manoj Kondibhau Naikade

A relation for an adequate pore fraction needed to obtain residual Si and C free composites via reactive Si-X alloy infiltration is presented. The volume ratio of SiC and carbonaceous phase, the composition of the infiltrating liquid and the apparent densi ...

ELSEVIER SCI LTD2022

Drops: Controlled crystallization of organic crystals and their use as matrix materials for encapsulation of volatiles

Aysu Ceren Okur

Encapsulation techniques open up new possibilities to control the kinetics and location of the release of active ingredients. Despite the progresses achieved to obtain a better control over the dimensions and composition of the capsules, the encapsulation ...

EPFL2022

On the bulk compressibility of close-packed particles and their composites

Andreas Mortensen

The hydrostatic compaction of composites comprising a closely-packed particle-bed filled by a dense matrix is measured experimentally using a fluid-pressurization apparatus. A highly compliant polymer or pure aluminium are infiltrated into preforms of pack ...

ELSEVIER SCI LTD2022

Dielectric properties of 3-3 flexible composites by infiltration of elastomers into porous ceramic structures using cellulose scaffold

Frank Nüesch, Thomas Geiger

Elastomer composites are prepared by infiltrating polydimethylsiloxane (PDMS) into a porous ceramic structure of nanoparticles. This method differs from the conventional approach, where particles are dispersed into the polymer matrix, since here, the polym ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Deep learning accelerated prediction of the permeability of fibrous microstructures

Véronique Michaud, Baris Çaglar, Guillaume Clément Broggi

Permeability of fibrous microstructures is a key material property for predicting the mold fill times and resin flow path during composite manufacturing. In this work, we report an efficient approach to predict the permeability of 3D microstructures from d ...

2022

Capillary Effects in Fiber Reinforced Polymer Composite Processing: A Review

Véronique Michaud, Baris Çaglar, Jacobus Gerardus Rudolph Staal, Helena Luisa Teixido Pedarros

Capillarity plays a crucial role in many natural and engineered systems, ranging from nutrient delivery in plants to functional textiles for wear comfort or thermal heat pipes for heat dissipation. Unlike nano- or microfluidic systems with well-defined por ...

FRONTIERS MEDIA SA2022

Cyclic Behaviour of Unidirectional Hybrid Interlayer Glass/Carbon and Carbon/Carbon Composites

Anastasios Vassilopoulos

The lack of ductility is a major drawback of fibre reinforced polymer (FRP) materials. As it is known, these materials are stiff and strong, but brittle with little or no warning before final failure. In the last decades, some solutions have been proposed ...

SPRINGER-VERLAG SINGAPORE PTE LTD2022

Surface energy contributions to the work of infiltration in metal matrix composite processing

Andreas Mortensen, Gionata Schneider

The work needed to mechanically drive molten metal into a porous solid preform when producing a composite material by infiltration can significantly exceed the energy change required for thermodynamically reversible infiltration. We measure, by quantitativ ...

2021

Study and characterization of silicon metal alloys systems for the reactive infiltration process of ceramic matrix composites

Manoj Kondibhau Naikade

Silicon infiltrated silicon carbide (SiSiC) is one of the most promising and economical non-oxide ceramic matrix composites for high-temperature structural applications. In recent years infiltration by Si-alloys instead of pure Si has become popular to avo ...

EPFL2021

Electrospun nanofibers for electrochemical reduction of CO2: A mini review

Andreas Züttel, Wen Luo, Jie Zhang

The electrochemical reduction of CO2 (CO2RR) into valuable products represents a step towards alleviating global warming and the energy crisis. However, the sluggish kinetics of the CO2RR and the competitive hydrogen evolution reaction (HER) still limit th ...

Elsevier2021

Review of hybrid composites fatigue

Anastasios Vassilopoulos, Dharun Vadugappatty Srinivasan

Hybrid composites become popular and are today used in a large number of contemporary structural applications. When compared to non-hybrid composites, hybridization offers additional benefits since the mixing of cheaper, low-quality fibers, with more expen ...

2021

Improved properties of soft magnetic composites with hollow microstructures

Yves Perriard, Xiaotao Ren

Soft Magnetic Composites (SMCs) possess promising electromagnetic characteristics and attract intense research and application interest in the engineering community. Fabrication of composites with customized architecture is feasible due to the recent advan ...

2021

Surface modified microfibrillated cellulose‐poly(vinylidene fluoride) composites: β‐phase formation, viscoelastic and dielectric performance

Véronique Michaud, Yves Leterrier, Dragan Damjanovic, Mohammed Arif Poothanari

The effect of silylation of microfibrillated cellulose (MFC) surfaces on β‐phase formation in poly(vinylidene difluoride) (PVDF) and the resulting viscoelastic and dielectric performance of MFC‐PVDF composites is investigated. Two different organosilanes, ...

2021

Model-Based Interpretation of Measurements for Fatigue Evaluation of Existing Reinforced Concrete Bridges

Eugen Brühwiler, Ian Smith, Sai Ganesh Sarvotham Pai, Imane Bayane

New methods are required for sustainable and economical management of bridges. Efficient management can be achieved by a detailed understanding of bridge behavior through monitoring and model-based data interpretation. This paper presents a methodology to ...

2021

Processing and micro-mechanical characterization of multi-component transition MC carbides in iron

Andreas Mortensen, Léa Deillon, Goran Zagar, Marta Fornabaio, Lionel Michelet

We prepare multi-component transition monocarbides of chosen composition by arc-melting together a pre-alloy of the transition metals and cast iron. Based on the elements Ti, Ta, V, Nb and W, 51 different binary, ternary and quaternary compositions are pro ...

2021

Composite material

Véronique Michaud, Amaël Maximilien Cohades

In a composite material (6), comprising a fibrous reinforcement (3), and a polymer matrix (14), wherein the polymer matrix (14) comprises two interpenetrating phases, namely a thermoset phase and a continuous thermoplastic phase, wherein the thermoset phas ...

2020